How to set billing doc parameter for multiple selection ?????

Hi all,
Output for Billing
VF31, SD70AV3A
i would like to add ‘Multiple selection’ to the Billing Document parameter.  multiple Currently, it would only give data for one of the documents in the selection.
According to me the billing parameter can be changed for multiple selection, need your suggestion for how to proceed with this..
Thx in adv
Megha

VF31 <b>does</b> have multiple selection option for Billing document, at least in my world (4.7).

Similar Messages

  • Stop Multiple Billing Docs generation  for multiple confirmations ,

    Hello Experts,
    We have implemented the SAP CRM service module.
    We are creating the gollowup  Service Confirmations for the Service Process.
    Some times we are facing the problem with Billing Doc generation for Service Confirmations in CRM system.
    We are using the colletive Billing process and it runs evry night.
    The Probelm :
    One Service Process has multiple confirmations and the collective billing process creates the Billing Doc for each and every Confirmations.
    Our general process, is only one Billing Doc should be generated for all the confirmations.
    I am not understading ,why the system is generating the multiple Billing Docs for multiple confirmations.
    Please If any body has any suggestion, please provide.
    Regards
    Madhu

    Hello Madhu,
    Are all your confirmations exactly same?
    One billing document will be created only when all the fields (mentioned below) are same -
    1. header fields
    - Billing type                                                   
    - Billing unit                                                   
    - Payer                                                          
    - Collective run identifier (GUID)                               
    - Terms of payment                                               
    - Billing date                                                   
    - Value date (is set to the billing date by default)             
    - Document currency                                              
    - Reference currency                                             
    - Incoterms part 1                                               
    - Incoterms part 2                                               
    - Split criterion                                                
    - Reference number                                               
    - Pricing procedure of pricing                                   
    2. header partner. partners must even have same address.
    To analyze the cause of split, use the 'Display split analysis' function in the display of the billing list.                   
    Hope this reply helps.
    regards,
    Rimzhim

  • I need to set up 12 iPad 3s to train groups of teachers in one-day workshops.  Any suggestions as to how to set up the iPads for multiple users?

    I have 12 iPad 3s that I want to set up to train multiple groups of teachers on in anticipation of purchasing classroom sets eventually.  I am looking for suggestions in how to set up the iPads to be used by multiple users.

    Managing Multiple iPads/iPods in a School Setting
    http://courses.moodleshare.com/course/view.php?id=162
     Cheers, Tom

  • Setting property attribute values for multiple selected objects.

    Hello,
    Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The generated MERGE, INSERT and UPDATE statements will perform DML on all of the columns in the target table, setting the 90 columns with no mapping set to NULL. This is due to the Loading Properties 'Load Column when Updating Row' and 'Load Column when Inserting Row' both default to Yes. I would like to select multiple Attributes in the Table Operator and change the 'Load Column when Updating Row' and 'Load Column when Inserting Row' to No. This is similar to what you were able to do in Oracle Forms 9.0 Designer select multiple Items in a Block and change the properties en-masse.
    Thanks

    Hi,
    Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
    Cheers,
    Phil

  • How to set up Time machine for multiple computers

    How to name and select for backup

    A Time Capsule does not require you to do anything.. each computer will establish its own backup in a sparsebundle.. and keep it different from the other computers. It all just works. Mostly..!!
    http://pondini.org/TM/33.html

  • How to set a forecast function for multiple fact cubes

    Hi all!
    We have plan and actual cubes divided by year, they're included in a multi-cube, and on top of that multi-cube an aggregation level is made.
    On this aggregation level we're trying to implement a forecast planning function. But on the "Associated Parameter Record" tab, in "Historic Data Filter" field I can choose only one infoprovider containing the historical data.
    So the function complains that "there's not enough actual data to do forecast" while executing...
    Is there any way to make it work with the data model we're using?
    Thanks!

    hi,
      the historic data selection only restrict your base data for the forcast, but you can´t select any targets.
    standard forcast function forcast based time characteristic as these are changed generally,
    try restricting time or forecast keyfigures
    hope it helps
    regards
    laksh

  • How do set the system parameter for user defaults?

    When we are creating new users they are getting the European default for date format and decimal format.  I have found is there is a structure BAPIDEFAUL that contains these values.  However, I have not found the configuration for changing these values.  Does anyone have the answer to this problem?

    Ronald,
    with USERS_GEN, users are created with BBP_USER_CREATECP.
    This function uses DEFAULTS to pass parameters.
    But those parameters are not available in interface or file upload
    USERS_GEN will take default values in system parameters:
    Set date format and decimal format like in system parameters
      data: defaults   type bapidefaul.
      clear defaults.
      CALL 'C_SAPGPARAM'
           ID 'NAME' FIELD 'zcsa/moddatfm'
           ID 'VALUE' FIELD DEFAULTS-DATFM.
      CALL 'C_SAPGPARAM'
           ID 'NAME' FIELD 'zcsa/moddcpfm'
           ID 'VALUE' FIELD DEFAULTS-DCPFM.
    So, this is the only way to "customize" it: define system parameters zcsa/moddatfm & zcsa/moddcpfm in RZ10.
    Rgds
    Christophe

  • Parameter for Multiple Selection

    Hi Experts,
    How I have to programming my Parameters, that I can select more than one value?
    Parameter: user type .....
    I want to select User "Test" and User "Mike".
    Regards,
    Mike

    You should convert your Parameter to Select-option to be able to select more than one value.
    Like:
    TABLES: USR02.
    SELECT-OPTIONS: S_USER FOR USR02-BNAME.
    Make sure than you change your select query.
    Like:
    WHERE USER IN S_USER
    Regards,
    Naimesh Patel

  • How to set the tables parameter to a BAPI using adaptive RFC model

    Hi,
    I have a BAPI ZBAPI that has a tables parameter ZPernr of type ZTable with two elements pernr and name.
    I used adaptive RFC model and created model classes for the BAPI.
    My question how do i set list of pernr and name to the tables parameter in the webdynpro for java.
    I have the following methods available
    ZBAPI input = new ZBAPI();
    1.ZTable table = new ZTable();
    table.setPernr(pernr);
    table.setname(name);
    input.addZPernr(table);
    how do i set the table parameter for multiple pernr and name
    2.
    add all the pernr and name to list and set that list to input in the following way
    input.setZPernr(list) and list of typecom.sap.aii.proxy.framework.core. AbstractList
    out of two methods mentioned which one is correct.
    Please let me know the solution
    Thanks
    Bala Duvvuri

    Hi Bala,
                In your code:
    List pernrList = new ArrayList();
    pernrList  should be declared as the  type of class HROBJECT   ( The structure name in the model  e.g. the node PERFWARN type is Zhrecmfm_002_Perfrat_Warning_Input )
    Try this:
    HROBJECT  pernrList = new HROBJECT();
    pernrList.setPernr(pernr);
    input.setPernr_List(pernrList);
    // call BAPI execute method
    If you want to pass list of pernrs, you can pass in alternate way
    IPrivate<viewname>.I<nodeame>Node prNode = wdContext.node<node>();
    IPrivate<viewname>.I<nodeame>Element prEle;
    for (int i = 0; i < table.size(); i++) {
    HROBJECT  pernrList = new HROBJECT();
    pernrList.setPernr(pernr); // Set the pernr from current record
    prEle = prNode.create<nodeame>Element(pernrList);
    prNode.addElement(prEle);     
    // call BAPI execute method
    Once I execute the BAPI how do i iterate thru second table parameter PERNR_PERFRAT to get pernr and performance rating text
    Say your node name is  PERNR_PERFRAT
    for (int i = 0; i < wdContext.nodePERNR_PERFRAT().size(); i++) {
    wdContext.nodePERNR_PERFRAT().getPERNR_PERFRATElementAt(i).getPernr();
    wdContext.nodePERNR_PERFRAT().getPERNR_PERFRATElementAt(i).getPerfrat();
    Regards,
    Siva

  • How do I set individual sound alerts for multiple email accounts?

    How do I set individual sound alerts for multiple email accounts?

    Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
    Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

  • How to set a change pointer for a perticular table?

    Hi,
    Please let me know how to set a change pointer for a perticular table.

    what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
    do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
    set the table to 'record all changes' using SE11.
    you might re-consider if the table has a lot of  data and is accessed very often for performance-resons.
    change protocols can be evaluated using tx, SCU3.

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • One parameter for multiple Crystal reports in Publication

    Does anyone know if it is possible to enter one identical parameter for multiple Crystal reports in publication when scheduling? BOE 3.1 SP3 Windows, Java.
    To elaborate I am creating publication with multiple reports, each report has one parameter and this parameter is identical in every report in publication. So instead of entering this parameter many times I would like to enter once. 
    If yes point me in the right direction to get the how to or post the steps.

    Daniel,
    Thank you so much for your answer. It was very helpful. In the end, it didn't work but it helped me figure out what was happening. I use a different form for the reports and I had it coded in the form which report to use. I created a second form for the second crystal and then I used an if statement to choose the form and it worked like a charm.
    Thanks so much again!

  • How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

    Hi Friends,
    How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
    External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
    In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
    We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
    997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
    Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
    Appreciate your valuable answers!!
    Thanks,
    Amirineni

    Amirineni,
    AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
    Alternatively, if this is a must requirement, you can generate the FA from backend and  send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

  • HOW TO  SET A DEAFULT  VALUE  FOR A FIELD?

    hi friends
      i have doubt..how to  set a default  value for a field..say  like in  local printer field i always want  lp01 to  be displayed defaultly..when i  click  F1  in that  field i  get the parameter id ..i  know there is something  dealt with that  parameter id..how can i  set that  default value ..in the case of the default  printer value i made in  own data settings as lp01 but  how to  do it  normally  for other  field which has parameter id ??????
    thanks and regards
    prince

    Hi Prince,
    u can set the default value in abap as given below
    SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN SKIP 1.
    PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
    PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
    PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
    PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
    PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
    PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
    SELECTION-SCREEN SKIP 1.
    SELECTION-SCREEN : END OF BLOCK B1.
    or
    u can give the default value in INITIALIZATION also.
    vlue = '1000'.

Maybe you are looking for