How to set Bless N900 as the default Camera App?

Is there a way to set Bless N900 as the default camera app? I guess there would be a way to manually set the buttons to perform certain tasks, so maybe it can be done, but not sure how?
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

check your settings (reboot first )
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Similar Messages

How to set InDesign CS5 as the default in the system having InDesign CS4 has the default ?

How to set InDesign CS5 as the default .indd application when you have InDesign CS4 and CS5 installed and InDesign CS4 is the current default (InDesign CS4 was installed after CS5 installation)

Thanks, but I already tried it at first but it is not the effective method.
I think its because of the this reason :
Both - InDesign CS4 and InDesign CS5 have their application/program/exe named as "indesign.exe".
Installation of either InDesign CS4 or InDesign CS5, sets a Windows default path for the "indesign.exe". In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which was directing InDesign CS5's "indesign.exe" was replaced by InDesign CS4's "indesign.exe".
But after long google and search through regedit, I've got the solution :
Locate HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
Change the value of (Default) attribute to "C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\InDesign.exe" "%1" // Include the quotes
Message was edited by: Vidit Kothari

HT4623 How to make Google Maps as the default Map App in my iPhone 5

How to make Google Maps as the default Map App in my iPhone 5, so that I could still use the old bookmarks and use the pins to drop, Please assist.

You cannot make Google Maps the default mapping app.

How Do I Wrap Text Like the iOS Camera App?

Hello. I am in yearbook, and I have been challenged with designing the cover of the yearbook, and I have been having a few problems along the way. One of these problems is to wrap text. Specifically, I'm stuck on how I would wrap text like the iOS camera app on the bottom of the screen. The words seem like they are wrap around a 3D object to give it that effect, but I can't really tell. If anyone can help me, it would be greatly appreciated.

JJMack wrote:
There is a big difference between being a casual user than real work or development. I own a iPod its a great MP3 player and a device I can display my pictures on out of my pocket. I'll even Facetime my kids at time to see my grand kids or help fix something. My wife has a mini iPad for quick internet access and quire music and uses her iPod to entertain our two year old grandson with games. She uses a Canon 1D mark 4 and I a Cannon 1D mark II. The only use the iPad and iPod cameras get is Facetime. No iOS apps are use to work on images they have no value when you have Photoshop. The iPod is better for displaying image then the iPad mini it has a 3:2 aspect ratio display and travels better the the mini iPad which has a 4:3 aspect ratio display. I also crop image for display on wall mounted HDTV. The iPad is better for casual internet access then the iPod. All our kids have iPhones and they all use computers either Mac or PC for work and internet access. When you have a Unix or Windows why would you want to touch an iOS device for work or serious internet access. Apple mobile devices are convenient for casual use and grand kids don't get that dirty finger painting on them as they do using real paint. Nothing of real value is maintained on an iOS device.
Well...there's Photoshop Touch and Photoshop Mix as well as Lightroom Mobile. It could be argued that they're don't exactly mirror their desktop cousins, yes, but they weren't meant to be. They were meant as extensions to the desktop experience. (e.g., Lightroom Mobile lets one work with the RAW images they have in their Lightroom desktop collections.)
The more powerful Windows tablets can run Photoshop desktop (like Photoshop CC) too.
@bluebocat: Are you looking for text with a perspective? Like it has a vanishing point? As if it was turned in a certain direction in 3D space?

How to set up icloud as the default calendar in Outlook

how do I set up icloud as the default calendar in Outlook?

Not possible, Outlook only allows Exchange or local calendars to be the default, same with Contacts.

How to set a Photoshop version the default application when two versions are installed?

I have two versions of photoshop installed on my Mac. Double clicking on the Photo in Bridge CS6, the photo is opened in Photoshop CS5 (Photoshop CS5 (default). Haw can I set Photoshop CS6 as the default application?

Thanks for your prompt replay, I had already done what you suggested, but it does not work. When you open in Bridge File>Open with you still see Photoshop CS5 (default) and the file is opened automatically with Photoshop CS5 and not CS6 unless you specifically choose Open with Photoshop CS6. I vaguely remember that I found once somewhere "would you like Photoshop xxx to be your default option? but I cannot remember where and I cannot find it anymore

How to set Adobe Reader as the default in Safari 6

When running 10.6, Safari defaulted to Adobe Reader to open documents not otherwise specified by an extension (e.g., docx). However, in 10.8 w/ 6.0 the default reader appears to be TextEdit - which returns garbage from my financial instituitions. I can download the file and then open with AR but how do I set 6.0 to default to AR rather than TextEdit? I am not given the option to select the program to open with by right/option clicking the file link and I am not sure I want to make AR the default for all .txt files.....

The plug-in is there - but the default still is textedit..... looking at Adobe's site they had some issues in the past with Lion and Safari 5.1 earlier this year..... maybe a solution is forthcoming from that corner? However, that was tied to Rosetta sooo....... I'll cogitate some more but any other ideas are welcome..... Thanks for your help this evening.....

HT5467 Why is my default camera app not appearing in the location list?

Any photo taken by the native camera app in ios6 (after a restore from ios5.1 to ios6) no longer includes gpsinfo. The default camera never asked for permission, nor is it found in the location data list under privacy settings. Even resetting the privacy and location settings did not fix it.
iPhone 4S. iOS6.0. Clean install.
Anybody else with this same problem?

I just solved my problem!
Since installing iOS6 I immediately installed and started to use a third-party camera app for most photos. Occasionally I would use the default camera app for photos - but only through the lock screen.
So, it turns out that you need to open the default camera app through the icon at least once. This brings up the request to use location services, and also adds the Camera App to the Location Services list. Solved.
For some reason, using the camera through the lock screen does not trigger this request for location services, and every photo taken is naturally taken without any gpsinfo included.
A simple answer to what seemed like a complex problem. Glad to find the solution though. Hope this helps others.

Change the default camera (for quick launch)

I'm having some issues with the default Camera app.
I find that Camera Zoom FX and others, are better, (snd respond better to the physical camera button).
Is there a way to make pressing the camera button, launch a different camera app than the default ?!
Thanks

As I understand, the application need to support the quick launch option. My guess is that the developer for the camera application, need to specific this support for each model itself.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

IPhone 4 'Searching...' / 'No Signal' + default Camera app freezing/pixelated

Hey everyone!
I recently (26th August) had my iPhone replaced by Apple due to water damage, when I got the new iPhone home everything was fine for around an hour until the signal dropped of and just displayed 'Searching...' or 'No Signal'
I assumed it may have been the sim as that was also slightly damaged, so I ordered a new sim from O2 and had it activated when it arrived, this didn't work, the phone still displayed the same messages and O2 said it may have been a bad sim card so they sent another one...same problem when that arrived also, by now I was getting angry with O2 as I had been without network service for almost a week(now over a week)
I restored the phone and chose to set up as a new iPhone, to see if that changed anything, it didn't so I restored back to my backup.
Today (5th Sep) I was due to go to an Apple Genius Bar appointment about the phone so in the hope that they would again replace the iPhone, I restored it to as new so none of my details were on the device, when the restore was finished the network suddenly started to work again and I started to receive 3 weeks worth of text's.
All seemed to be working fine, so I decided to log in and cancel the genius appointment, but now, almost exactly as when I first got the replacement, the signal has again dropped off and is now displaying the same 'Searching...' / 'No Signal messages.
Have I been given a duff replacement or is this some kind of software problem?
My other problem with the camera...
I was at the Paralympics on Sunday (2nd Sep) and wanted to take photo's and videos with the new replacement iPhone, I had had no problems with the camera up until that day, but for some reason the default camera app suddenly kept freezing after every photo I took, displayed all the photos as pixelated and was crashing all the time so it was pretty much unusable.
What could be the problem?
Many thanks, Dan!

Hi Patrick.mc,
Did you end up fixing this issue? I had IOS7.0.4 and first encountered this problem yesterday (TPG Australia) and it's really frustrating. Backed up the phone, erased/reset the phone and it went away (although the "cellular settings" now read "mobile settings") at Apple Genius Bar. They also replaced the battery and in the process, realized there were other problem with the phone so they gave me a new one as it is still under warranty. However, I then updated the software of the new phone to IOS7.1.1 and restored it from my backup. THE PROBLEM CAME BACK! ON THE NEW PHONE! The cellular settings is now mobile settings. Signal keeps dropping out and can never open the cellular settings. It just keeps crashing to Springboard.
I ended up resetting the new phone, and just do a partial restore (manually transfer the photos back to the phone etc) and reinstalling apps back manually. Lost all other minor stuff. Let me know if anyone out there is encountering this.

How do I set safari to be the default rss reader on windows XP

How do I set safari to be the default rss reader on windows XP?

Looks like I got it to work by selecting a document and setting in get info. For some reason it was not working before.
never mind

How to remove "all day" as the default setting in iCal?

How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.

Hello Valerie,
the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
Regards
Léonie

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

How to set current year,month as default value in combo box

hi, im newbie of xcelsius user
i realize that hv a issue that display combo box base on year & month
let said
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
Step2
Then i go format cell to format/custom date to year & month
Eg1: Year u2013> 02-04-09 convert to u2018YYYYu2019 (2009)
Eg2: Month u2013> 02-04-09 convert to u2018mmmmu2019 (April)
So output like this
year | month | Product | revenue 
2009 | April | a | $4,154
2009 | April | b | $6,813
2009 | May | a | $9,875
2009 | June | b | $6,813
2010 | April | a | $6,813
2010 | April | b | $9,875
2010 | June | a | $9,875
2010 | June | b | $6,813
But the problem is when i insert to combo box,use u201Cfilter Row u201D, i excpectation will display only 2009,2010
But Actual display the Year in combo box is duplicated :'(
so any solution ? and then only how to set current year & month as default value :'(
thanks,
regards
s1
Edited by: Leong Pui Kee on Feb 25, 2011 5:25 AM
Edited by: Leong Pui Kee on Feb 25, 2011 5:36 AM

hi,
your created data
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
In this, year and month both are same data, make the diffent data like year 2009, 2010 And month Jan, Feb, March, ...Etc
and also one more check you formulas on month and year, select correct source data, destination data for compoonent..
OR
from above, to create a date column and convert date-->year, date--> month and Explore it.
All the best,
Praveen

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

How to set Bless N900 as the default Camera App?

Similar Messages

Maybe you are looking for