How to set "browser with" to a direct ip open at IE

Hi all,
I am using VS2013 Express for web, evertime i browse with IE, it point to localhost. Could i set to http://192.168.8.11 (local ip) for some reason.?
I wanna use local iis instead of iis express.
I am using .net 2.0 file.
Thanks alot.

Hi andrewlpchan,
I am glad that you have solved the problem and thanks for your share us the solution here, so it would be helpful for other members
who get the same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me

how use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me

You must be using an update CD. You need the software that has the full version first - install that, then you can use the update one if needed. I know, cuz I made the same mistake - lol

How can one browse between (like 5 or so) open windows in Safari?

How can one browse between (like 5 or so) open windows in Safari?

Hello ...
Good information here for utilizing Safari features.
Mastering Safari’s multi page tab system
Carolyn

How-To Set Up with Uverse Gateway with Airport Extreme

I just spent hours figuring this out so I thought it would be helpful to someone. Maybe, maybe not. My goal was to get Back to My Mac turned on...but this should also be how you set up your wireless network if you have both an Airport Extreme and a Uverse Gateway.
As I was trying to setup BTMM, I got a "double NAT" error. To use BTMM, you have to use either Time Capsule or Airport Extreme, so that NAT has to be enabled. That meant I had to figure out how to turn off U-verse's. I looked through the settings but saw nothing about it. Several hours of research--and a useless support call to AT&T--I finally figured it out. Here's the configuration you need, in brief.
On the Airport Extreme, under Internet > Internet Connections, Connection Sharing must be set to "Share a public IP address". Then under the NAT button, Enable NAT Port Mapping Protocol must be checked.
Now, unless you doe rest of this configuration, you will get a double DHCP error. So, in the Uverse Gateway settings, you must do this:
1. Under Wireless, click the option to DISABLE wireless. Click Save.
2. Under Firewall, click the option with DMZ in the name. On this page, choose your Airport Extreme (whatever you named it). Then scroll down and choose the option that says "Allow All Applications (DMZPlus Mode)". Save that configuration. DO A HARD RESET ON THE AIRPORT EXTREME. Then that should enable a single NAT protocol and BTMM will be on its way. And your wireless network will be set up properly.

Will the above method work on a set up with a Verizon Modem to a DLink wireless router to a Time Capsule?
I know of no reason why it would not. Whenever there is another router ahead of the Time Capsule, the Time Capsule must be configured in Briddge Mode. My network has 4 routers. The "main" router is setup to handle DHCP and NAT and the other 3 routers are setup in Bridge Mode. No problems.
Weird thing is Air Video set up tells me I have a double NAT
Double NAT occurs when you have two routers on a network both set up to handle DHCP and NAT services. Your Verizon "modem" may be a gateway....a combination modem/router on the same chassis. If that's the case, then every other router on the network must be confgured as a "Bridge".
If you have the "main" router on the network setup to handle DHCP and NAT, in theory, you can have multiple other routers on the network as long as they are all setup in Bridge Mode. In Bridge Mode, DHCP and NAT are turned off, so the other routers simply pass through the network information from the main router. It's by far the easiest way to configure multiple routers without having to go into special DMZ, port mapping, etc type of configurations.

How to set encoding with xmldom ?

Hello !
I have to build an xml file from a query.
I need to have : <?xml version="1.0" encoding="ISO8859-1"?> on the first line.
I know how to set the version --> xmldom.setVersion(doc,'1.0'); ... but I don't know how to set the encoding.
Is there a way to set it ?
Thanks

No. It is not possible. Here is an extract of a document I found on metalink :
(XML Parser for PL/SQL FAQs)
Q: Is it possible to dynamically set the encoding in the XML document?
A: No, you must include the proper encoding declaration in your document, as
per the specification. You cannot use setCharset(DOMDocument) to set the
encoding for the input of your document. SetCharset(DOMDocument) is used
with oracle.xml.parser.v2.XMLDocument to set the correct encoding for
printing of the document.

How to set volume with AudioServicesPlaySystemSound?

I got playing sound with AudioServicesPlaySystemSound working, its quite simple but theres no documentation on how to set volume at all. Is it possible and how?

Did you ever find an answer to this? I need to do the same thing.

How to set dbURL with characterEncoding

hi all,
How can I add characterEncoding in my JDBC connection, do I need to do that inorder to insert and display Chiness character into mysql db?
Thank you!

Hi,
BTITLE works a lot like TTITLE. See your other thread:
how to set page number & current date in sqlplus result
It's not considered nice to post (essentially) the same question more than once.
If it happens by accident (which is easy to do on this site) then mark one of the duplicate threads as "Answered" right away.

How to set the default Excel cell format when opening XML to XLS using an existing stylesheet?

Hi,
I have an XML file, which I'm opening with the Excel application. The stylesheet I use is horizontal.xsl.
The problem arised when the XML has data in the format "1/4" or "1/16", which is translated in the Excel as date (like "01/04/2007").
I think I have to set the default cell type to "Text" instead of "General". Does anyone know how it can be done?

Is this the same question as idoZo, if so jigg has already answered it. If not then you should post your own query not hijack someone elses giving a clear and concise question, "how to set it??" doesn't help you or other in the forum to provide you with a solution.
Is this relevant to TestStand? If it is then help by providing which version you are using and what software you are using with it. If not then post your question in the correct board.
Regards
Ray Farmer

How to sets the Reason for Rejection of the Open Sales Order Lines

Hello gurus,
          I want to set the Reason for Rejection of the Open Sales Order Lines, Case is like :
If current date is exeed the Auto Void Confirmed Back Order Days(for item level) + date (last responding from customer), then reason for rejection should be set, So i want the logic to find out the date is exceed or not.
Thanks
Anjana

Hello anjana,
   Actually your question is some confusing, but if u want to get eldest change as active sales order then logic is as follows:
1. On base of OBJNR u have to get UDATE from JCDS table
2. then write logic as:
SORT i_jcds BY objnr stat chgnr DESCENDING.
      LOOP AT i_jcds INTO wa_jcds1.
        CLEAR lv_stat.
        lv_stat = wa_jcds1-stat.
        AT NEW objnr.
          AT NEW stat.
            CLEAR: wa_tab.
            wa_tab-objnr = wa_jcds1-objnr.
            wa_tab-stat = lv_stat.
          ENDAT.
        ENDAT.
        IF wa_jcds1-inact = 'X'.
          CLEAR lv_tabix.
          IF sy-tabix > 1.
            lv_tabix = sy-tabix - 1.
          ELSE.
            lv_tabix = 1.
          ENDIF.
          READ TABLE i_jcds INTO wa_jcds2 INDEX lv_tabix.
          IF sy-subrc = 0.
            wa_tab-chgnr = wa_jcds2-chgnr.
            wa_tab-udate = wa_jcds2-udate.
            wa_tab-utime = wa_jcds2-utime.
            APPEND wa_tab TO i_tab.
          ENDIF.
          CONTINUE.
        ELSE.
          wa_tab-chgnr = wa_jcds1-chgnr.
          wa_tab-udate = wa_jcds1-udate.
          wa_tab-utime = wa_jcds1-utime.
        ENDIF.
        AT END OF objnr .
          AT END OF stat.
            APPEND wa_tab TO i_tab.
          ENDAT.
        ENDAT.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr stat.
      SORT i_tab BY objnr stat udate utime.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr.
3. now in i_tab table u'll get eldest UDATE
Hope its work for u.
Thanks & Regards,
Sumit Joshi

How to set hint with SQL profile

Hi,
I need to put a leading hint into a sub-query
How can I do that ?
I tried:
dbms_sqltune.import_sql_profile
sql_text => 'select ...'
profile => sqlprof_attr(XXXXX) => I don't know what to set for XXXXX
name => my_sql_profile
force_match => true)10.2.0.4
Thanks for your help

I need to put a leading hint into a sub-query It doesn't sound like a good idea.
If you're going to hint - especially using plan stability features - then you need to hint fully otherwise you're asking for trouble.
See http://jonathanlewis.wordpress.com/2011/06/08/how-to-hint-1/
The "best" approach to this sort of generic question is to run the sql statement with the single leading hint (if that really is desirable) then extract the full set of hints from that execution (which will have a different sql id) and apply it to your original statement.
If you have a look at COE_XFR_SQL_PROFILE.SQL in Oracle Support doc id 215187.1 then that will give you a good idea of how to do it.
That script is not exactly what you want because it uses a sql profile to apply a previously generated plan for that specific sql taken out of AWR or the cursor cache, but the principle is the same.
This is using SQL Profiles as they were not originally designed - which was vehicles for statistical adjustements - but using them like stored outlines (the latter deprecated in 11.1 onwards).
SQL Profiles require the tuning pack.
You have not mentioned version but depending on that, it might be that SQL Plan Baselines are the appropriate mechanism and you can achieve something similar to that mentioned above using dbms_spm.load_plans_from_cursor_cache:
load_plans_from_cursor_cache
(sql_id           IN VARCHAR2,   <---------- the sql id of the manually hinted sql from which to copy the plan
plan_hash_value IN NUMBER := NULL, <-------------- the plan in memory to copy
sql_text         IN CLOB, <-------------------- the sql text of the sql to apply the plan above to (get via a direct look up from v$sql or dba_hist_sqltext as necesary)
fixed            IN VARCHAR2 := 'NO',
enabled          IN VARCHAR2 := 'YES') Whichever method you use, avoid any sort of solution involving a single hint directed at a subquery.
Edited by: Dom Brooks on Nov 26, 2012 9:48 PM
reworded

How to set browser window title from FPM ?

How do I set brwoser window title at runtime in FPM ?
Using IDR area objetc I can set only apllication are(ident area) title, not the browser window title. Browser window title is set statically from iView name of in portal, and PFCG contect if in NWBC client.
But in my case, I want to set it at runtime, for eg. in case of Purchase Order window, I want to set it as 'Purchase Order:<PO number>
Is there any API to set this?
Thanks again,
Hari
Edited by: Hari Krishnan P on Jun 9, 2010 10:22 AM

When you call it as external window you may pass the title. other than that i am afraid you are left with no choice.

How to set up with cacheing DNS for local network?

Our new Lion Server has a static IP Address pointed to over the internet by our registrar's zone file. Planning the Lion Server installation process with the intent of hosting Web, Mail and Open Directory services to a small number of users who are nearly all located off-site. I do also want Lion Server to be a caching DNS Server and DHCP authority on the local network to replace what dnsmasq does on our current Linux server.
I am looking forward to offloading some of the lower level Linux administration tasks and putting myself in the hands of the Lion Server Setup Assistant and Server App :-) but at the same time don't understand some of its assumptions and fear having to spend a lot of time experimenting and re-installing.
So, specifically, I want the Server App to know that my Lion Server has a "Host Name for the Internet" but that the DNS it sets up will not be the DNS for my zone - I will be managing that through my registrar's interfaces.
Second problem is my fnot understanding what name space devices on the local network will / should use. e.g. The Linux server will be available for backups etc on the local intranet (and optionally have a static ip address on the Internet) but MacBooks, PCs, iPads and iPhones will be served ip addresses by the Lion Server's DHCP. So will / should these dynamic devices have their machine names fully qualified by our domain name with RFC 1918 style ip addresses or something like .local? How do I tell this to Lion's Server App / Setup Assistant? How easy is it to update these initial settings later?

You do indeed need to have a master zone on lion server. There's no way to get around that since Open Directory depends on Kerberos and Kerberos depends on the DNS. LS scripts may see that the rDNS record exists, but I highly doubt that it'll auto configure everything for you... and given the number of possible variables, I bet that even if it worked something would need additional tweaking.
Sounds like an interesting lab excersize. You should try it on a test server!
Again... you just need to folow the set up procedure that Lion Server presents you with.
It won't be smart enough to see your external records and use them to configure a key distribution center for your OD.
As far as your caching needs... Could you set up your DHCP server to set the DNS server setting to show your internal server as the first hit, and your external as the second? That way when the client requests a resolution it'll not get a hit on your local server but will from the external?
The question then is how long will it wait for a response from the first server? Or will the first server respond with "I don't know" sending the client immediately to the second.
The server set up that I have works similarly. I have an internal master DNS that is replicated to a secondary. The first DNS has an A record (community.server.com) that points to the INTERNAL ip address of the secondary server that's also running the web service. The first server is running DHCP. It tells the clients to use the first and second servers as it's DNS lookup.
Now... Externally, my registrar hosts an A record for community.server.com that points to the external IP address of my router which then forwards the request to the proper port on the internal network.
This way, the local clients internally look up and get a response locally when they go for community.server.com. Externally, clients that look up community.server.com get the external connection to the router in my school.
Yikes... I fear that this is as clear as mud!
-Graham

How to set CLASSPATH with makePropertiesObject in WLST

In Weblogic 9.1 we are using Nodemanager to start the Admin Server in WLST using nmStart. We want to set some memory args for the Admin server and I was told by BEA that you'd use makePropertiesObject to this and pass this object to nmStart, that was fine. We also want to update the admin server classpath and were told makePropertiesObject could also be used for this.
I'm doing
arg = "Arguments=\" -client " + jvm_args + "\""
prps = makePropertiesObject (arg)
nmStart(targetserver, domain_home, props=prps)
where jvm_args ="-Xms256m -Xmx512m -XX:MaxPermSize=128m -Djava.class.path=..."
Also tried
jvm_args = "-Xms256m -Xmx512m -XX:MaxPermSize=128m -cp ......",
However, in both cases the Admin Server process is running with default "-Djava.class.path=...", plus a my "-cp myclasspath" or "-Djava.class.path=myclasspath", depending on which method I used. Am I doing something obviously wrong ? When the Admin Sever is started by NM using nmStart how would you set its classpath ? Should another command be used for starting the Admin Server instead ?

Hello,
http://edocs.bea.com/wls/docs91/server_start/nodemgr.html#1083353
This link lists the list of properties that can be specified to start.
Normally, for managed servers, the admin server collects the values for
these properties from various config mbeans and sends them to the
nodmanager. For starting the admin server itself, a properties object
can be created and the values explicitly populated with desired values
and passed to nmStart.
Classpath is one of the properties to send to the nodemanager while
requesting server start.
HTH,
-satya
BEA Blog:
http://dev2dev.bea.com/blog/sghattu/
Get Involved in CodeShare:
https://wls-console-extensions.projects.dev2dev.bea.com/
https://wlnav.projects.dev2dev.bea.com/
https://eclipse-wlst.projects.dev2dev.bea.com/
https://wlst.projects.dev2dev.bea.com/

How to set Updates with 11.3 when using Apple Remote Desktop for installation?

So for all pre-11.3 versions of Flash Player on OSX, I have just pulled out the "Adobe Flash Player.pkg" installer package from the installer .dmg and used Apple Remote Desktop to deploy Flash to the Macs I manage.
However, when doing that with Flash 11.3, this leaves the "Updates" setting in the Flash Player System Preference set to "Notify me to install updates".
I'd like to push something that would set this to "Allow Adobe to install updates".
Is there a way to modify the .pkg installer to have the System Preference set to that value (or push/copy some other .plist file to the clients to have that setting enabled?)
Thanks!

I poked around a bit and the file seems to be:
/Library/Application Support/Macromedia/mms.cfg
I'd like to get some confirmation from Adobe that this is the correct file to push, though (it seems like it as it only contains this):
AutoUpdateDisable=0
SilentAutoUpdateEnable=1

How to set browser view as a desktop view by default in mobile using jquery

Hi,
we are create one website in sharepoint 2013 with responsive.
when ever we are opening in mobile and desktop it is loading with exact UI.
But, our client asking us to change the view from mobile view to desktop view in browser while the page is loading,
the behind reason is dropdown view, our client expecting the look and feel exactly like desktop in mobile.

Hi BrettoAbraham,
Answer is - Deactivate "Mobile Browser View" from site feature.
By default, "Mobile Browser View" is active to save data bandwidth in PS2013. When it is active, it renders "Site content" page assuming user just select list/library to perform operation.
If you want user to see site page first and then navigate, then please Deactivate "Mobile Browser View"
Hope this will help you
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How to set "browser with" to a direct ip open at IE

Similar Messages

Maybe you are looking for