How to set Canvas to show actual playback area size

I have sequences that have source video footage in different aspect ratios (from VHS, Mini-DV etc.), however in FCE Easy Setup I have the output set to NTSC 720x480. Some of the sequences have video footage solely from the Mini-DV that is in a wide screen format (I believe 16:9), however that exact ratio is not important to this question.
Question: I need to re-scale and pan the Mini-DV video so as to better relate to the output 720x480 format. Currently in either the Canvas or Viewer only the fully wide screen Mini-DV view is displayed. Is there a way to also display the 720x480 output window so as to be able to position the wider and shorter Mini-DV video?

Thanks Skalicki that works. I am confused on one item though. I had initially created a sequence with the Mini-DV video inserted where the Canvas and Viewer only showed the widened view (not overlaid with the 720x480 output limits showing). I followed your advise then copy/pasted the same footage into the newly created sequence and I now get the correct width video with bars at top and bottom that I can easily correct using the Motion settings. Do you know why the initial sequence would not include the 720x480 output? Thanks for any thoughts.

Similar Messages

  • How to set Photoshop to show actual print size?

    When I go to View Print Size the resultant image is smaller than the actual print size.  How do I set PS to show the actual size on my monitor?

    Measure the physical horizontal viewing length of your monitor. 11.25 inches for example.
    Then the horizontal resolution your monitor is set to. 1280 pixels as an example.  divide 1280 by 11.25 to get 113.77 pixels per inch, your screen resolution. Round it out to 114.
    In Photoshop: Edit menu > Preferences > Units and Rulers, and in New Document Presets, change the Screen Resolution to 114.  Click OK, restart Photoshop.
    After that when you use View > Print Size, your onscreen rulers will match up to a physical ruler and your documents will be at the physical print size set in your document's dimensions under Image > Image Size.
    Gene

  • How to Set JFilechooser to show file with the same extension in the filetyp

    How to Set JFilechooser to show file with the same extension in the filetypes??
    help

    I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
    http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
    The introduction shows an example of how to do that.

  • My apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are miss

    my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
    missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
    in sfc/s014-04-13 13:14:03, Info                  CSI    000004cf [SR] Beginning Verify and Repair transaction
    2014-04-13 13:14:12, Info                  CSI    000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
    6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-04-13 13:14:19, Info                  CSI    000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
    6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-04-13 13:14:19, Info                  CSI    000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
    2014-04-13 13:14:27, Info                  CSI    000004d5 [SR] Verify completcannow detail I get this result

    and this the dism report 
    DISM report and It is  showing that cammand cannot perform because of  i/o devices error
    2014-04-14 00:54:14, Info                  DISM   PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
    2014-04-14 00:54:14, Info                  DISM   PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2014-04-14 00:54:14, Info                  DISM   PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
    2014-04-14 00:54:14, Info                  DISM   PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
    2014-04-14 00:56:26, Info                  DISM   PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
    2014-04-14 00:56:26, Info                  DISM   PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2014-04-14 00:56:26, Info                  DISM   PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
    2014-04-14 00:56:26, Info                  DISM   PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
    2014-04-14 02:41:53, Info                  DISM   PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
    2014-04-14 02:41:53, Info                  DISM   PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2014-04-14 02:41:53, Info                  DISM   PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
    2014-04-14 02:41:53, Info                  DISM   PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir

  • How do i find my phone using the find a phone app i have on it. I can only find out how to set it up not actually use it to locate my lost phone!

    Please could you help find my phone? It has Icloud and the lost phone app but I don't know how to use the app on my laptop to find the phone. I an only find information on setting it up not actually using it to locate my phone, thank you.

    Use computer browser
    https://www.icloud.com

  • How to set public even show detail to to all users

    How to set public even to show detail to all users or group. By default the public event only show "Busy" on calendar.

    Change the calendar's "everybody" permissions to include "Read" permisssion

  • How to set preference to "show all" open windows in all open applications (until I quit)

    how do I set preferences to "show all" windows in all open applications (until I quit the application) ?

    Can you explain more what the problem is and what you want to see.
    All windows are shown by default, unless you minimize them, so I'm confused at what you are asking.

  • In ActiveX(OCX), How to Set "Choose paper source by PDF page size"

    Using Adobe Acrobat Reader ActiveX(ocx) in Delphi 7.
    I want to set "Choose paper source by PDF page size" value, in Source Code dynamically.
    Do you know how to set in Source Code?  Not in Print Dialog Window.
    Please help me. (.net or C# or any language.)

    I have this exact same question. Does anyone know if this is possible?
    Thank you,
    Ryan

  • How to set default TV show cover in iTunes 11?

    Hi to all!
    I have just updated to the new iTunes 11 and I am going through all the changes and the new features. My first to question to anyone who has ansewrs is this:
    As I saw in the TV Shows section they have finaly gathered all the seasons into each tv show title, so now we don't have three "Boardwalk Empire" (one for each of the three seasons) for example but one where you get to click and see all the episodes and seasons inside Right?
    How do you get to change the cover of each series thought? For example in some shows I get the cover of the first season and in others the last. Is there a pattern or is it random? And if not is there a way that I choose which season cover represents the series?
    Thanks for your time!

    Still nothing too… Can anyone at least menion what was updated in 11.0.1?
    I don't know what to say Totux. Is it just me or Apple is heading back to the stone days of the 90s? I mean seriously what did these guys do in the last year? A new port for iPhone, two beta OSs and a lot of bad software.
    This is supposed to be the "easiest iTunes ever" and I haven't met anyone liking it yet. I suppose we will have to start thinking everything is a "feature" from now on

  • How to set JTextField to show certain map scale (e.g. 1/2000)

    Hi,folks. I have a JTextField instance. How can I set the format to only allow user to only type the map scale(e.g. 1/2000). I can only use the JTextField component. Thank you in advance.

    I think the regex you're looking for is"1/[1-9]\\d*"Note that in the regex you posted"1[\\]\\d*"the closing bracket is quoted by the backslash, causing the error you mentioned. Not that you needed a backslash there anyways.
    You can try this, but note that since replace(...) invokes remove(...) and replace(...), pasting an apparently valid String will not succeed if the slash is part of the replacement. Also that setText or pasting are the only ways to set the initial content as you won't be able to type it in one character at a time.import java.util.regex.Matcher;
    import java.util.regex.Pattern;
    import javax.swing.JFrame;
    import javax.swing.JTextField;
    import javax.swing.SwingUtilities;
    import javax.swing.text.AttributeSet;
    import javax.swing.text.BadLocationException;
    import javax.swing.text.PlainDocument;
    public class ScaleFactorTextField {
       public static void main(String[] args) {
          SwingUtilities.invokeLater(new Runnable() {
             @Override
             public void run() {
                new ScaleFactorTextField().makeUI();
       public void makeUI() {
          JTextField textField = new JTextField(10);
          textField.setDocument(new PlainDocument() {
             final Pattern p = Pattern.compile("1/[1-9]\\d*");
             @Override
             public void insertString(int offs, String str, AttributeSet a)
                   throws BadLocationException {
                String newText = getText(0, offs) + str +
                      getText(offs, getLength() - offs);
                if (isValidText(newText)) {
                   super.insertString(offs, str, a);
             @Override
             public void remove(int offs, int len) throws BadLocationException {
                String newText = getText(0, offs) +
                      getText(offs + len, getLength() - offs - len);
                if (isValidText(newText)) {
                   super.remove(offs, len);
             @Override
             public void replace(int offs, int len, String text,
                   AttributeSet attrs) throws BadLocationException {
                String newText = getText(0, offs) + text +
                      getText(offs + len, getLength() - offs - len);
                if (isValidText(newText)) {
                   super.replace(offs, len, text, attrs);
             private boolean isValidText(String text) {
                Matcher m = p.matcher(text);
                return m.matches();
          textField.setText("1/20000");
          JFrame frame = new JFrame();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.add(textField);
          frame.pack();
          frame.setLocationRelativeTo(null);
          frame.setVisible(true);
    }db

  • How to set canvas extension color for arbitrary image rotation?

    I'm using Photoshop CS4 v 11.0 with Windows XP.  When adjusting canvas size there's a menu for chosing the canvas extension color.  Where is the menu for chosing canvas extension color for arbitrary image rotation?
    Thanks.

    This will be the background colour selected in your toolbox.

  • Narrative view, how do I don't show parameters that are emtpy?

    Hi
    I'm going to create a Narrative view that shows what the users has selected in about 10 dashboards prompts. I'm typing things like ... Period: @{p_date_from} ... and so on.
    But what if the user didn't choose any particular prompt of the 10 that he has available? The I only want to show in the narrative view the one he has chosen.
    How do I do that?
    Thanks

    Ooh I forgott to say ... I'm not allowed to use javascipts ... funny ey?

  • How to set option in Scanning for Reduced File Size

    I am scanning from a Fujitsu 6230 scanner in Adobe Acrobat Standard 9.4.1. My scanning options are Color, 300DPI,Letter, High Quality, with Optimization options of Custom Settings of JPEG for Color/Grayscale. The scanned files are very large...1852KB per page. After using the Reduce File Size option and selecting Acrobat 8 and later, the file size is reduced to 187K. Is there a way to preset the Acrobat 8 or later setting....rather than having to do the two-step?
    Also, if I use Fujitsu's scanning interface I get far higher quality pdf's,  with small file sizes, and lower scanning resolution......but without the option to append to a pdf, an option I use frequently. Apparently their program for converting the scanned image to a pdf is more robust than Adobe's. Is there a way to use their image->pdf engine within Acrobat?

    Hi Boatseller,
    I will put this in simple way.
    Can we set properties in biztalk wcf_custom adaptor like 
    1. <security authenticationMode="UserNameOverTransport" 
    2. enableUnsecuredResponse="True" 
    or 
     includeTimestamp="false"
    3. <textMessageEncoding
    messageVersion="Soap11"/>
    <httpsTransport/>
    I am unable to find these properties in BizTalk wcf_custom adaptor properties. It will be great help if you could guide me in right direction . My problem is to receive response message into orchestration which is not having header. But the response is coming
    from web service. I saw that in fiddler.
    Also, If there is any steps to make these properties available in machine config, please share 
    Thanks in advance
    Vivek

  • How to set width to be same as screen size?

    Dear all
    I want to set the width of my view elements to be same as that of screen size, so that if a user with low resolution monitor runs it, or if a user with high resolution monitor runs it, both see the same.
    I tried setting the width to 100%. But it is not working.
    My root container layout is Grid layout.
    Any suggestions please?
    Thanks in adv.

    Hi,
    For ROOTUIELEMENTCONTAINER set the stretchedHorizontally,stretchedVertically to true.
    And for the UI element set width as 100%, this will make the UI elem to expand to the complete screen.
    Best regards,
    Suresh
    Message was edited by:
            Suresh Honnappanavar

  • I have a MacBook Air and for what ever reason, the print settings have gone out of whack. I am not sure how to set to print a normal A4 paper size or a standard envelope. These settings were working O.K., but not now

    I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

Maybe you are looking for