How to set "Cc" field in Dynamic Email address in Receiver JDBC adapter

I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards
Ravi Siddam

HI,
See fragment from help,
Specifications for mail attributes:
○       Under From, specify the e-mail address from which the message is sent.
○       Under To, specify the e-mail address that will receive the message. If you enter more than one address, you must separate them with a semicolon.
If you have specified an IMAP server under URL, the message is saved in the specified folder but is not sent to the receiver specified under To.
○       Under Cc, specify the other e-mail addresses to which the e-mail is to be sent.
These addresses are visible to the receiver.
○       Under Bcc, specify the other e-mail addresses to which the e-mail is to be sent.
These addresses are not visible to the receiver.
○       Enter the Subject of the e-mail message.
○       Specify whether you want to encode the content of the e-mail message. You have the following options:
■       None
■       Base64 (default value)
■       quoted-printable
Hope this helps.
Regards,
Akshay.
reward points if find useful.

Similar Messages

How to set "Cc" field in Dynamic Email address in Receiver Mail adapter

I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards,
Ravi Siddam

Hi,
If you do not need mail package for other reasons, I suppose it is enough to provide a value in Dynamic Configuration for fields "THeaderTO" and "THeaderCC" and the select "Use Adapter-Specific Message Attributes" and "Variable Transport Binding" in receiver Mail Adapter.
see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm">SAP help</a> for more details.
Regards,
Daniele

Can we configure the dynamic IP address in receiver JDBC channel

Hello,
Can we configure the dynamic IP address in receiver JDBC communication channel at runtime.
Thanks,
Soorya.

No, that is not possible.
The simplest solution would be to define a service and communication channel for each server and then use the receiver determination to determine which service to send to.
The only other way would be to use a receiver java proxy where you would have to code in the JDBC request yourself.
Regards,
Yaghya

How to set up Icloud, problem with email address

Hi
I have had my Iphone 4S for a few months but never used Icloud. I'm trying to set it up but can't figure out how to change the Apple ID - my apple ID is my yahoo email address. Don't I need to use the icloud address to back up? If so, how do I change it. When I click on Icloud it says "account" and there is my [email protected] address. I set up a new Icloud mail account but it's still not showing as the default.
I admit I'm a new Apple user and the whole Icloud thing confuses me. I would like to keep my phone backed up somewhere and it seems like the Icloud would do it. Can anyone explain in baby steps exactly what I need to do?
Thank you!
Laurianne

Hey mexigrl64,
Thanks for using Apple Support Communities, and great question!
The @icloud.com email address is only required if you want to use iCloud Mail & Notes. You can still use your Apple ID (in your case, the @yahoo.com address) for iCloud Contacts, Calendars, Reminders, Find my iPhone, Backup, etc. In short, you can use all of these functions without creating the @icloud.com address.
From the information you provided, and if backups are your only concern, then it sounds like you are good to go! There is no need to configure your iCloud settings to reflect the @icloud.com address, as this is just another email account that others can reach you at.
For more information on the @icloud.com address:
iCloud: Set up an @icloud.com email address
http://support.apple.com/kb/PH2620
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/HT4436
For additional information on iCloud backup:
iCloud: Backup and restore overview
http://support.apple.com/kb/HT4859
Thanks,
Matt M.

How to set one default "reply-to" email address for multiple accounts

I have an iPhone 3GS. I have my own domain name which I want to use as my primary "public" email address. It is forwarded from the hosting ISP to my ATT/Yahoo email address. I also have a Gmail account. I would like recipients to see that it comes from my domain ([email protected]), but since it is actually going through ATT/Yahoo, I can only see how to set the "From" field to either my ATT/Yahoo account or my Gmail account addresses. Is this even possible?
Essentially, I don't directly access "[email protected]", but that's where I want it to appear to come from, regardless of where it actually originated.
Any ideas?
Thanks,
Mark

You get e-mails just fine, but do you have rights to log into the e-mail server at myfirstandlastname.com? If you can do that (check with your hosting ISP to find out if they will let you), then you can just set up the iPhone to use that e-mail server to send your mail. It's possible to set up an iPhone IMAP account to get mail from gmail, but use a separate non-gmail SMTP server to send outgoing mail, all within the same iPhone e-mail account.
If you can get this working, then you won't need to mess with reply-to headers. Your e-mail will not only look like it got sent from myfirstandlastname.com -- it actually WILL be sent from there and all replies will automatically go there and then be forwarded as usual to your ATT/Yahoo address. No one will know that ATT/Yahoo is involved, and both your sent and received e-mail will show up in the same single e-mail account on the iPhone.
I do this all the time with my e-mail. My account is really at gmail, but the e-mail address says it came from mycollege.edu. My old college offers me an alumni forwarding-for-life account. They only forward mail, though; they don't hold it. They do also run an SMTP server, though, and that's what I use to make my outgoing e-mail look as if it came from mycollege.edu.

Exchange - Gmail : how to set a REPLY-TO/FROM email address?

I have Gmail setup as a Microsoft Exchange Account, so that it syncs my mail, calendar, and contacts (works great)
BUT - the problem is I never use my @gmail.com address to send mail, in Gmail I have several other addresses set up that I send mail "from". I don't like to get tied down to an ISP or service provider domain in case I want to change one day, so I own my own domain names and use my domain for email.
In my desktop email clients (ie - Thunderbird) I can set the "FROM" address to one of these other addresses, but there is no such option on the iPad.
Is there any way to configure this?
Is this functionality going to be enabled in a future version?
Thank you

No, there is no Reply to: field in iPad Mail. There are some workarounds, though.
First, some have reported doing what you said couldn't be done, i.e., setting some other account as the default. I've never tried that but it shouldn't be difficult to find their descriptions here in the forums.
I only do it on a case-by-case basis, using Mail's way of selecting which email address and outgoing server to use as you start composing the message. That doesn't seem to quite meet your requirements, though.
As for the future, if you'd like your ideas and suggestions to influence it then submit them via the iPad Feedback Form — http://www.apple.com/feedback/ipad.html

Filename attachment to dynamic email address in receiver email adapter

Hi,
Can i send a file with dynamic name to a dyanmically generated Email Id as attachment using receiver Email adapter ?
Thanks
Rupesh Kumar

Hi,
I had gone through the links given , but it doesn't answer my question completely. I think i need a java code to send dynamically generated filename to be send to dynamically generated email ID.
The file name and the email Id is available in the sender adapter.
This filename should be send as attachment to the Email Id using receiver Email adapter.
Thanks & regards,
Rupesh

How to get my Name in the From Field instead of email address?

For an Exchange Activesync account, how do you get your friendly "Name" to show in the From: field rather than email address ([email protected])?
I seem to be able to do this fro IMAP/POP accounts but not Exchange Activesync.
All the discussions I've found about gmail and Activesync seem to be centered on getting your messages to show a different return email address than your exchange account. I'm not looking for this, just to show the Name.
Thanks

If you add a contact ("Contacts app>> "+">> enter info) with that email address, it will appear in mail with whatever name you set in the email address' contact.

How to configure dynamic email address for notification

All,
I have a problem in assigning dynamic email address for notification activity in a bpel process, I want to assign a user from a user-properties file. How do I achieve this. I tried using the users in System-jazn-data.xml file, but if i add a email attribute to the existing users it doesn't show up. I am sure there should be an easier way of using identity service and adding attributes to the jazn realm user, I might be missing something.
I cannot have it as part of the payload the only way is to use identity service.
Thanks,
Chitra

Hi James,
Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
3. Bounce the server for this changes to take effect
4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

How Can I set up Thunderbird for multiple email addresses

I am using Eudora 7 to handle 6 email accounts on a Windows XP SP3 machine. I want to install Thunderbird on the same machine and import the email addresses. I have Eudora setup to store the data files for each email address in a different data directory. This allows me to have a different icon on the desktop for each email account. Clicking on an icon starts Eudora with the email address data stored in a specific directory.
What I don't know is how to have Thunderbird import the different email addresses from Eudora to Thunderbird and how to keep the individual email address data separate in Thunderbird.
Any help would be appreciated.

I never used Eudora, so I can't tell much about it. In any case, I believe it's dead.
Wrt multiple accounts in Thunderbird, there isn't much you can do wrong. Simply run the new account wizard and set-up the accounts you want (one at a time).
https://support.mozilla.org/en-US/kb/automatic-account-configuration
If any of your accounts are POP ones, make sure not to enable Global Inbox to keep them separate.
http://kb.mozillazine.org/Global_Inbox

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How to set "Cc" field in Dynamic Email address in Receiver JDBC adapter

Similar Messages

Maybe you are looking for