How to set common profile in portal server 6.2

Hi,
I have two servers installed with portal server 6.2 and Directory server 5.2 in both.
I hav to configure common ldap authentication for server1 and server2 i.e..primary LDAP is server1 and secondary ldap is server2 for both the servers,
when i try to login to server2, the password is authenticated from server1 successfully, but the profile is taking from local server i.e..server2 profile.
Please give some tips to configure external LDAP server for authentication as well as profile.
thanks & regards,
iqbal.

do you have a load balancer in front ?
then it would make sence to load balance both portal instance, use both DS in MMR mode.
/u

Similar Messages

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How to set a variable in portal session using web dynpro java.

Hi,
I have created a web dynpro application, which is running inside portal. I have created a role called "R1". Inside role R1, i have created 3 workset W1, W2 and W3. and inside each workset i have some pages and iviews.
My requirement is when user logins to the portal , and when he clicks on role R1 for the first time, a login page should come (so that we can do revalidation), and when he enters his password again in that login page , then only workset W1, W2 and W3 should be visible/accessible to him and after successful revalidation, if he clicks again on role R1, in that particular portal session, than that login page should not come.
for this, i thought i will set a variable in portal session, whenever user successfully revalidated himself, and if after successful revalidation he clicks again on role R1, i will check in doinit method of webdynpro whether variable is set or not (which i already set on successful revalidation), and if it is set then i will do Donavigation else i will present login page to the user.
Can anyone tells me how to set a variable in portal session using web dynpro java.
thanks
Arush

Hi,
Try this:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE, key, value)
WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE, key)
Ex:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE,"Key1","Value1");
String value1=WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE,"Key1").toString();
/people/william.cui/blog/2007/02/12/sharing-session-context-between-parent-and-external-windows-running-on-same-host
Regards,
Charan

How do set operation timeout in tomcat server?

hi all
suppose i have one endless loop program(jsp) that program run under tomcat server,
so it's keep on runing in tomcat server.
i want, after some time the server send error message like operation timeout.
how do set operation timeout in tomcat server?
if anybody know help me.
my mail id [email protected]

Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

How to set up the "incoming Mail server" for google apss account

how to set up the "incoming Mail server" for google apss account

The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server. You'll have to ask them about it.

How to set selected Language from Portal dropdown in Logon to User profile

Hi Gurus,
I select a language in Portal Language dropdown in the Logon Page.
After login in the content is getting displayed in the browser language.
I want the portal content to be displayed in the selected language in the portal LogonPage.
I checked the thread Logon page change to add a dropdown for language
The is the requirement for me too .
Kindly suggest me on how to set the language in the Portal user Profile so that the portal contents gets displayed in the selected languages from the dropdown .
Thanks in Advance

Hi Prasanna,
The language that the portal is displayed in depends on the following
heirarchy, with the languages at the top of the list taking precedence
over those at the bottom:
1. Component (iview) language (defined in the portalapp.xml)
2. Portal Mandatory language (defined in the prtDefault.properties)
3. User language (defined in the user#s profile).
4. Request language (defined by the browser).
5. Portal Default language (defined in the prtDefault.properties)
6. System Default language (default locale defined by the OS).
So for example, if you have your portal user language (as in point 3)
set to Russian, but the language of the iView that is the logon page
(as in point 1) set to English, that logon page will be displayed in
English.
Keeping the above in mind, please make the necessary changes to the
configurations and check if it helps.
Regards,
Sowmya
Edited by: Sowmya K on Jun 2, 2011 11:32 AM

How to set a profile to a system profile in Profile Manager on Server Mavericks

We're trying to create a profile to allow wifi connection to allow AD logins. We have 802.1x PEAP network and we are able to set the profile up but it does not connect until after an user signs in. I know that there used to be a setting in Profile Manager to set the type (User, System or Login Window) but I can't seem to find it now. I know I could edit the profile code but I'd rather not get mucking around in there unless absolutely necessary.

You posted in the iPad forum instead of the OSX Server forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

How to set the priority for Commit Server?

Hi all,
I want to know how to set up the priority for committing documents.
I'm having two different odc applications and i want to commit documents belongs to one application (URGENT) as soon as it has complete the indexing. (I'm running commit server every second for this (URGENT) application).
But once the commit server start to commit batches belongs to one application it continues until finishes, and then only it switch to the URGENT application even though indexed documents are there.I have tested with batch priority, Batch status fields in commit server.
What is exactly happen in setting batch priority ?
How do i switch commit serve to run urgent batches (which is belongs to another application) as soon as indexed??
I can use ODC or ODDC.
Thank You.....

Don't worry - I'm more think aloud, so it is more a hypothesis than a solution.
You write that
We are using ODC to Index the documentsWhat exactly does this mean? If it means that a user types in metadata values, then you could take a look whether those metadata are needed for the item to be checked in (like the mentioned security group), or whether it is "other" metadata (e.g. supplier, invoice number, etc.) that you could, in theory, fill in in your application in IPM - imagine that you use IPM to check in the document and all you have is a TIFF.
Btw. you also write that
(we) use Input agent to sent documents to IPMI thought that ODC (Commit Profile) does this work for you, or not? If you use ODC to commit to a disk, and Input agent to get it from a disk to IPM, how about using a direct commit profile to IPM?

How to set color profile when exporting a RAW file version as a JPEG?

I import my raw files to Aperture and when exporting as a JPEG I want to specify a color profile of sRBG. I cannot see how to set the color profile for the export. Does anyone know how to do this?

When you go to export versions, edit the presets, and there is a drop down box that lets you select the profile.
I'd suggest picking up the Aperture book by Luna, Long, and Harrington. Lots of great info there.

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

How to set the CLASSPATH in Unix Server

Hi, everyone~
Do anyone noe how to set the CLASSPATH in the hp-ux server? I tried the setenv CLASSPATH, but not working.. I think should use export. But my jsp pages still cannot working, dunnoe y?
I wonder is the hp-ux support jsp and servlet or not?
In order to let the jsp and servlet to run properly in the unix server, what kinds of steps should taken ?
Hope somemore who experience with this situation b4 can give me some guidance.. Thanks~~
regards,
tzeyik

Tomcat ignores any and all CLASSPATH environment variables. Even if you could figure out how to set it, Tomcat wouldn't use it.
Better to learn how Tomcat's CLASSPATH works and how to deploy Web apps properly. - MOD

How to Set "delete from hub and server" for each account

How can I set "delete from hub and server" differently for each account?
I have 3 emails (2 shared, 1 personal).
the personal is a 'hotmail' account which has device set to 'sync email', 'push', and 'Use SSL'.
it will only sync one way (from desktop to device).
I cannot set the global setting on the device to "delete from Hub and server" without affecting all accounts.
I do not want to have to confirm delete on every item.
previous to the 10.3 update this was not an issue.
am i missing something? or is this another step backwards?

The only other way would be to set it to prompt every time you get an email. Yeah, I know that defeats the purpose.. I guess in this aspect it is a step back

How to set ACLs on Remote MAC server Volumes..

Hi,
I have Mac OS X server v 10.5 Leopard. Initially I have enabled the ACLs using fsaclctl on the MAC server volume. When this volume gets mounted(through afp) on some other MAC client(MAC OS X 10.4 Tiger), the ACL status is shown as disabled. And it not allowing to set the ACLs on the remote volume from the client side.
I have used the following command to enable ACLs from Client.
sudo fsaclctl -p /Volumes/<server Volume> -e
This failed as "not supported".
Anyone knows how to set the ACLs on the remote MAC server volumes? Basically I want to see ACL working on Remote MAC server volumes.

Hi
+". . . remote MAC server volumes . . ."+
Are you saying you are trying to enable ACLs on volumes shared by another OSX Server when volumes are mounted on the server in question?
Or are saying you can't see if ACLs on mounted volumes when issuing ls -lae for example?
You might want to read:
http://discussions.apple.com/thread.jspa?messageID=648307&#648307
http://discussions.apple.com/thread.jspa?messageID=1535247
and
http://discussions.apple.com/message.jspa?messageID=8456140#8456140
http://discussions.apple.com/message.jspa?messageID=8340573#8340573
http://discussions.apple.com/message.jspa?messageID=7777878#7777878
Tony

How to set a favicon in portal

Hi,
could anybody tell me where to set the small icon beside a URL or beside Portal favorites? Where can I set this favicon? In the Theme Editor?
Thanks and best regards
Markus Armbruster

Hi Markus,
as far as I know there is no setting in the Theme Editor to set up a favicon icon for the portal.
In Wikipedia you will find a nice <a href="http://en.wikipedia.org/wiki/Favicon">article</a> on favicons. There you will find a detailed description how to set up favicons for web servers.
If it comes to the SAP NetWeaver Portal things get a bit more complicated. But have a look into this <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=199216">thread</a>. Darell explains the option you have got pretty well.
Hope I could help!
Best regards,
Martin

How to Set CLASSPATH in Apache Web Server Using IAS

Hi,
I have problem setting the classpath for the servlet I am using for file uploading...My work environment is Web Server is Apache with Oracle8i IAS on Sun Solaris..
I have tried various method like setting wrapper.classpath=/oracle/ias/Apache/Jserv/servlets and my class resides under /oracle/ias/Apache/Jserv/servlets/com/oreilly/servlets/MultipartRequest.class
in the Jserv.properties, still it get the error message class ...not found in type declaration when I compile the code...my reference to the servlet in my JSP code is com.oreilly.servlet.MultipartRequest ..
Can someone help me out please, if you have have any idea of how to set the class path with the working environment I have specified ealier....
null

have you posted this on the ias 9i forum where the ias 9i apache experts are at ??

How to set common profile in portal server 6.2

Similar Messages

Maybe you are looking for