How to set Comp Viewer view size?

I'm using After effect with a Wacom tablet. I'm having a funny issue with the comp viewer window. Since the main menu is on top, I continuously move my cursor all around the screen to open that menu. From time to time, when moving over the Comp Viewer window, the view abruptly changes as if I were drastically zooming out in response to the pen's movement. Then I simply zoom in manually or use the view buttons to go back to my previous view.
My question is, there's a way to set the Comp Viewer's view so it never changes by accident? (or at least not until I really want to change it on my own). I've checked my pen's settings, and seems to work fine,but any suggestion is welcome.

Nobody out there has a solution to this?

Similar Messages

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

LMS 3.2 - LMS Portal -- How to set 'My Portal' View as Default-View?

Hi all,
LMS Portal comes up with three default views (My Portal, CiscoWorks Portal, LMS).
As within My Portal it is possible to change layout and sorting, I would like to set this view as
the default view comming up at login.
How can this be configured?
Actually LMS View comes up.
Thanks for any feedback

You have to add the portlet Ciscoworks Admin to your portal
With this portlet you can set the default view
Add portlet -> Ciscoworks -> Other -> Ciscoworks Admin
Cheers,
Michel

How to set the default view (Alphabetic) in CCM ?

Hi guys,
Easy question for smart guys =)
In CCM we have 2 views: groups and index (alphabetic).
How can I set the default view ?
For example, I would like to have always the index view (alphabetic)
Thanks for your help guys !
regards,
Diego

Hi diego,
I think you have to modify directly bsp for this.
Regrads,
Bertrand

How to Set Album list view as default

MacBook Pro 3,1
SL 10.6.7
iTunes 10.3.1
inverted-store-links
if i use the »inverted-store-links« i always get the list-view instead the before used album-list.
i think the same problem with playlists always shown in list-view by default.
maybe there is a function at com.apple.itunes.plsit to set the default view.
any other ideas are welcome.
thanks
chris

you could use this script:
Change Hidden iTunes Preferences v2.4
This application will allow you to invoke hidden iTunes preferences:
Show "Library" playlist
Changing view setting is global
Allow half-stars in ratings
Hide "Ping" buttons
Show/hide arrow links -- to either search the iTunes Store or search your library
Load complete iTunes Store preview before playing
Create playlists for purchased song collections
Play songs while importing or converting
Create file names with track number
Maintain grid view for Search results
Option-click zoom button for Mini Player&
Show buttons horizontally

How to set up the font size or front form by default when I input textbox with adcrobat 7.0

Hi all,
When I input front into textbox with Acrobat 7.0 , the default font size is times roman, and defaul front size is 9, but i want to change its defaul attribute, so i press "Ctrl + E" ,and it daps textbox tool bar, then choose and modify attribute ,let them as my dafault configuration, but when i open a new PDF file ,and insert and edit textbox , the front's attribute return before .How to set up my requisite the font size or front form by default ?

This is an old version, so I'm not sure it's available there, but try to
right-click the field using the Object Selection Tool (after you've set it
up the way you want it) and then select "Use current properties as new
defaults".

How to set the maximum heap size on a deployed application?

I�m running a fairly large java application and am getting java.lang.OutOfMemoryError. I could increase the heap size in my development environment to eliminate this error. However, I don�t know how to set this in a deployed application. We are currently using ant to build our software.
Another question, when I execute a statement such as java �Xmx512M �cp app.jar. Is it correct to say that the application in app.jar will use to a maximum of 512MB of memory when running?
Thank you everyone for your help!

But first, when you say "a deployed environment" do you mean an executable .jar file? This is what I'm using.The term "deploy" is commonly used to refer to deploying an ear file or a war file on an application server.
I would assume that there is some entry you can include in the .jar's
Manifest.mf file to specify the maximum memory, but I can't find an example of the entry. <a href="http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6197671"></a>

How to set the default maximum size for java's heap?

Hi!
Im trying to set the default max size for the java heap - but not from the command line.
I would like to set it higher as default on my computer.. how can I do that?
thanks!

>
...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file).

How to set the JavaHelp viewer

Hi,
Robohelp 7, Windows XP, installed with the TCS
How do you point RoboHelp to a different JavaHelp viewer
instance after it has been set initially? I was first using
JavaHelp 1, but then installed JavaHelp 2, and I want to switch
between the two for viewing, as I compile for the different
versions. The only way I found to do it was to change the path to
the active viewer which causes RoboHelp to lose it and to ask you
again where it is.
And by the way, I looked in the help for this and I got some
whacked out non-scrollable window that seemed to search the Adobe
website, rather than provide help. Am I doing something wrong? It
didn't look like a help system at all.
Thanks,
Russ

Hi Russ and welcome to our community
Fellow Adobe Community Expert Peter Grainge has info on
JavaHelp that may help. Not sure about switching viewers.
For the help, click Tools * Options * General tab and choose
the “Use offline help” option. Then close and restart
RoboHelp to see the offline version of the help. It should be
better.
Here is the link to Peter's site:
Click
here to visit Peter's site.
Cheers... Rick

How to set Authorisation to view and maintain employee data.

Hi,
     I have a requirement to restrict the user to view and maintain all employee data except some manager position for some company codes. How can I do this .
Cheers
Senthil

Hi,
(This is what we had done....)
Check the composite role : SAP_EMPLOYEE_ERP
Create a Z role for SAP_EMPLOYEE_ERP;
Will prompt you to copy the corresponding roles in it to z roles.
The z-composite role is then assigned to the user.
While creating an ESS user, to to restrict access to personnel master data, changes in the authorization P_ORGIN needs to be done.
In our case, check the z-role created ; zSAP_ESSUSER_ERP.
In Authorizations tab=>Display authorization data option => ;
Expand Human Resources;
In HR : Master data, you can find the various authorization assignments to P_ORIGIN;
Authorization level (AUTHC)
Infotype (INFTY)
Personnel Area (PERSA)
Employee Group   (PERSG)
Employee Subgroup (PERSK)
Subtype (SUBTY)
Organizational Key (VDSK1)
Authorization level (AUTHC) takes the values :
R (Read)          : for Read access
M (Matchcode) : for Read access to Input helps (F4)
W (Write)         : for Write access
S (Symmetric) : for Write access using the Symmetric Double Verification Principle
*                      : always includes all other authorization levels simultaneously
E and D (Enqueue and Dequeue) :
for Write access using the Asymmetrical Double Verification Principle. E allows the user to create and change locked data records and D allows the user to change lock indicators.
In your case probably you need to consider for :
Employee Group   (PERSG) / Employee Subgroup (PERSK)
the Authorization level set to R for the defined infotypes.
This is again, Basis work....
Please Check the links to get more clue :
http://www.*********************/hr_security/hr_security.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/b7b83b5b831f3be10000000a114084/frameset.htm
Hope this helps you!!
Cheers and Good Luck!!
Remi

How to set a variant View of ALV at runtime

Hi,
For each user, I have saved in a specific table the Configuration Key of The variant he has created.
At runtime I want to set this one in my ALV component.
I think to use the method if_salv_wd_comp_table_pers~set_standard_view of class CL_SALV_WD_C_TABLE but this class isn't implemented elsewhere SALV_WD_TABLE.
As anybody worked on this need, or something like ?
Thanks

I want to access attribute of context node A in another context node B of the same view .
for that In my View impel class I have created a public static attribute which can be accessed from any where in the view .
I want to set the value of this public static attribute from the set method of the attribute of the context node A .
which I can access in my other node B's attribute
cl.._impl=>attr_tmp = lv_varibleA . for setting the value .
lv_variableB = Cl..._impl=>attr_tmp for accessing the value .
will this work ???

How to set default folder view in Outlook PDF Portfolio?

I'm using Acrobat 9.0 within MS Outlook 2007 to create a portfolio of a folder with subfolders. I would like the initial portfolio view to mimic a typical Outlook view with folder list and reading preview pane. I can create said view in the PDF file by splitting the window vertically and clicking my way to the desired folder level. But I cannot, for the life of me, figure out how to save those choices as a default under Portfolio Properties or elsewhere. Can anyone offer advice? Thanks.

Can no one help me? No one at all?

How to set IE compatibility view programmatically in Browser Helper Object?

Goal: In IE11, I need to set "IE=EmulateIE7" compatibility view for particular websites.
Adding an HTML meta header or a HTTP response header is not an option as we do not control the websites. Configuring IE (Tools > Compatibility View settings...) is not fine-grained enough as it truncates the website URL to the second and top level domains.
My approach is to achieve the same but more fine-grained with the help of a Browser Helper Object (BHO). Is this possible at all?
I created a C# Hello World BHO according to an online sample. It works in IE9. I haven't tested it in IE11 yet. Now I need to add some flesh to the bone. My idea is to register with the appropriate WebBrowser event, check the URL being retrieved, and then
set a WebBrowser property to turn on compatibility view if necessary.
Is this feasible?
Which WebBrowser event would that be? DownloadBegin or DownloadEnd? Other?
pure guess: WebBrowser.PutProperty("X-UA-Compatible", "IE=EmulateIE7")?
Any ideas to cut down my trial-and-error space? Thanks a lot!
PS: I (prematurely?) posted this question last night on stackoverflow.com.

The compatibility list is more about developer and user preference and Microsoft tends to not provide API to override preferences.
If the user accepts launching a separate window to render the content in some alternative browser (pretty much like viewing source in Notepad) you can modify the browser emulation registry value before launching your own webbrowser control based application.
Visual C++ MVP

How to set default folder view to "list"

Hi guys,
This is regarding Tiger. I poked around in the Finder forum to no avail. Have any of you come up with anything that would force the default folder view to "list" view?
Um, folders, they are found in the gui.
Thanks for any thoughts, scripts, plists, insults welcome, have a Merry Christmas!

"all windows"
Unfortunately that did not work.
While in the Finder from the menu bar go to Finder > Preferences > General tab. See the item "Open new windows in column view" Whatever that is affecting I suppose would be the place to start hacking away on. I haven't investigated that. Would have been nice if Apple added list view in there.
I'll see if I can poke around a bit and find what file gets affected by setting that option. I'll post if I find something.

How to set the default page size ?

Hi there,
I just bought a 15.4" Macbook Pro.
When I use Safari to surf, I found that the image/fonts are to small for my liking.
So I did VIEW > ZOOM IN two times & the image/fonts & it become satisfactory.
But after I shutdown & restart the laptop again, I find that whenever I startup, the page in Safari when back to the smaller setting & I have to click VIEW > ZOOM IN twice again .
My question is how to make this settings permanent ? It is irritating having to do VIEW > ZOOM IN everytime I start up the system !!
Any ideas ?
Thnaks

In Safari, go to Safari >> Preferences. Click on the Appearance tab. Set the standard and monospaced fonts. That not only sets the default fonts for web pages (many web-sites will specify other fonts), but also the default sizes (though web-sites can specify alternate sizes). Also, on the 'Advanced' tab, there's a checkbox labeled 'Never use font sizes smaller than' followed by a drop-down. This permits you to prevent the text from going beneath the specified size.
The advanced tab also permits you to provide a CSS stylesheet to apply as the default. If you know CSS, this can be very powerful.

How to set Comp Viewer view size?

Similar Messages

Maybe you are looking for