How to set CTI OS Agent Wrap-up and Reason Codes by Skill Set

I've the situation I need to create Wrap-up Codes based on differents skill sets. Do you know how to achieve this in CTI OS Agent, as you do it on Cisco Agent Desktop?
Any leading on this?

Any decent VB.NET programmer can use the samples provided by Cisco as a starting point and add some new functionality (based on the decent API doc) to set the wrap-up reason.
Pop up something based on the skill ID extracted from the established call and enable them to pick. It's just a string - it's not a "code" per se; there is no mapping between strings and ints and there is no standard report showing counts on wrap up reasons. What do you want to use the knowledge of the wrap-up 'code" for? Are you looking at the TCDs?
Don't quite know how you are going to set this up based on a skill group without (say) each client fetching from the registry. Easy, but a pain to maintain. Otherwise you are going to need an ODBC client query to a DB somewhere. Certainly doable.
Regards,
Geoff

Similar Messages

  • Uccx agent call wrap up custom reason codes

    Dear Experts,
        we have a team of agents who gets the wrapup option after they hung up to add the notes and reason codes (attached screen shot). there is another team of agents in same uccx who require different list of reason codes to be dispalyed when call is ended. The managemen have also asked if there can be sub menus in the list ? Please can some one advise if this is possible and if so I can get some instructions to configure this please.
    Regards,
    KZ

    Take a look at the Desktop Administrator Guide for your UCCX version: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/user/guide/cda80ccxug-cm.pdf

  • CUIC Agent Real-time reporting reason code

    Hi,
    In CUIC agent real time report reason code for not ready it shows 50002 or integer we have configured in ICM.
    How we can display reason code as name which we have configured in icm like tea, coffee , meeting.
    CUIC version we are using 8.5.
    Regards,
    Dinesh Joshi

    The way I got round this was creating thresholds - eg 1 = Lunch 2 = meeting etc.
    this does work, however you can't then Threshold the time on those particular texts, but at least you can see what 'state' they are in.
    let me know if it works..
    Thanks Sarah

  • Agent logged out suddenly, reason code:50003

    Hi,
    We have icm 8.0(3) and cad 8.
    Sometimes, an agent (each time a different one) is logged out suddenly and he get the reason code: 50003
    Please find attached a logout status report that is showing the agent using extension “7459” has been logged out at 13:48:50 and reason code “50003”
    I am attaching the CM-pim, opc and ctios logs as well
    did anyone have been faced by a simalar issue?
    Thanks in advance
    Georges

    Reason code 50003 says
    50003 - Device Failure log out. Call Manager reported that the device is out of service.
    From the below trace you can see that PIM has recieved an outofservice event from jgw and we dont have jgw logs but jgw is simply passing the events it received from callmanager.
        Line 9: 13:44:46:595 PG1B-pim1 Trace: RecvAddressOutOfService: Couldn't find client stack for device target device string 800
        Line 12: 13:44:47:939 PG1B-pim1 Trace: RecvAddressOutOfService: Couldn't find client stack for device target device string 7459
        Line 18: 13:46:12:784 PG1B-pim1 Trace: RecvAddressOutOfService: Couldn't find client stack for device target device string 800
        Line 19: 13:46:20:065 PG1B-pim1 Trace: RecvAddressOutOfService: Couldn't find client stack for device target device string 7459
        Line 43: 13:48:51:021 PG1B-pim1 Trace: RecvAddressOutOfService: Couldn't find client stack for device target device string 800
    so you need to investigate why callmanager is reporting out of service event for these phones, if you are using extension mobility and when the user logs out you could see similar messages in the jgw/pim logs
    From the PG side you could
    -check  the connectivity with callmanager,
    - check the switch port setting are as per BOM (auto/auto if using gigi interfaces)
    - check that the TCP chimney has been disabled on the PG
    https://supportforums.cisco.com/docs/DOC-9222
    - check PG eventvwr logs to see if you get any clues
    If it doesnt help, collect the callmanager SDI/SDL and CTIManager SDI/SDL logs at Detailed level and open a TAC case with CUCM team to investigate why phones are reported as outof service to PG
    Thanks,
    Shirish

  • How to find out my verizon account number and pass code?

    Recently I tried to port one Verizon prepaid cellphone number to another carrier. During the porting the carrier asked me to provide the Verizon account number and pass code. How can I get this info?
    Thanks.

    Just as SuzyQ stated, Verizon Prepaid account numbers should be your mobile number, and as for the passcode, unless changed should be the last 4 digits of your mobile number. If you need more assistance give customer service a call.

  • New to indesign how do i make a magazine to pdf and get code for website

    Hi,
    I am learning indesign, I cannot seem to figure out how to create a magazine than convert it to PDF and get a html code so I can have display on my website. Is this even possiable? I have watch the videos maybe I am missing something. Can someone offer advice please or links.
    Thank you.

    Here are some sites for learning html/css. Some sites are getting a bit old, I have not updated the link for the w3.org site yet. But this should point you in the right direction. And make sure your pop up blocker is on, some of these site will open a new window with an ad. I tried to mark as many as I could, but I may have missed a few.
    http://www.htmlbasix.com/ Has pop up ads
    http://www.htmlgoodies.com/
    http://www.w3.org/MarkUp/html-spec/html-spec_toc.html
    http://www.lissaexplains.com/ - Has pop up ads
    http://www.thesitewizard.com/
    http://www.how-to-build-websites.com/

  • How Do i start Intelligent Agent on Unix

    how do i start Intelligent Agent on Unix and how do i make it start automatically when the server comes up
    Thank u

    Depends on which version of Oracle your are running
    Pre 9i -
    Handled via the lsnrctl command
    start - lsnrctl dbnsmp start
    stop - lsnrctl dbsnmp stop
    or lsnrctl ? for help
    In addition pre 9i a data gatther process is needed to collect stats on host in 9i included with the agent
    9i - Own facility
    agentctl
    agentctl start agent
    agentclt stop agent
    agentcl ? help
    However you configure db and listenter to come and and down should work or see you sysadmin.
    Steve

  • How to set credit limit on Agent

    Hi All
    In My scenario  Liability is generated on Customer but i want to consider agent as well for credit limit.
    As i know credit limit is set on the payer partner function but here i have created Agent as a partner function who is not the payer.
    How to set credit management settings on agent.
    Do i need to take help of an Abaper for this.
    regards
    Prabhakar

    hi,
    this is to inform you that,
    what is the business logic on the same. please let me know.
    1. if your customer as well as Agent is one and the same that means customer then you can have credit limit on the same as per your requriment.
    2. if your AGENT is not playing a role of a customer but a partner then speak to your ABAPER by giving PARTNER INDEX NUMBER which will generate on including the AGENT in the sales order.
    3. please ask your whether it is not possible or not:
    3.1. create a Z table with maintaince views with the list of partner's to consider for credit limit.
    3.2. assign or link this Z table to the credit limit creation program or include.
    please check and confirm
    balajia

  • Status Agent Not Reachable - How to set a fix port number?

    My EM 10g was working fine http://localhost:5500/em
    Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
    But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
    I had even installed another DB called REPOS other than the default ORCL.
    All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
    So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
    Thanks in advance.

    Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
    I did not uninstall the db.
    Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
    Everything is on my local machine.
    Following is from the portlist
    Ultra Search HTTP port number =5620
    Enterprise Manager Agent Port =
    iSQL*Plus HTTP port number =5560
    Enterprise Manager Console HTTP Port (orcl) = 5500
    Enterprise Manager Agent Port (orcl) = 1830
    Enterprise Manager Console HTTP Port (repos) = 5501
    Enterprise Manager Agent Port (repos) = 1831
    Enterprise Manager Console HTTP Port (ORCL) = 5502
    Enterprise Manager Agent Port (ORCL) = 1830
    Enterprise Manager Console HTTP Port (repos) = 5501
    Enterprise Manager Agent Port (repos) = 1831

  • How to set the number of rings for the agent phone rings before it get the not prepared state

    hi, how to set the number of rings for the agent phone rings?  before it get the not prepared state.
    thanks

    The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
    What you are looking for is called "Ring no answer time".  It is set in the Agent Desk Setting List tool.
    Regards,
    Kevin

  • How to create UCCE CTI Toolkit Custom Reason Codes

    Hi,
    I am wondering about how to create UCCE Custom Reason Codes for CTI Toolkit.
    Do we have to assign text to the values which comes from the registry in CTI OS Server?
    Quote from: CTI OS System Manager Guide for Cisco Unified ICM/Contact Center Enterprise & Hosted Release 9.0(1)
    To define the text that appears for each Logout reason code in the Select Reason dialog box, set the value data associated with the reason code to the text you want to appear for that reason code.
    Regards,
    ACK

    Hi,
    CTIOS custom reason code should be created in the registry along with their value. For Logout and NotReady you need to create new DWORD value where Name will be the reason code description and value data will be reason code. For wrap -up you need to create a new string value where data value will be the wrap-up description.
    Below are the loction where you need to change the registry file.
    HKEY_LOCAL_MACHINE/Ctios/CTIOS_instance name/Server/Agent/ReasonCodes/Logout
    HKEY_LOCAL_MACHINE/Ctios/CTIOS_instance name/Server/Agent/ReasonCodes/NotReady
    HKEY_LOCAL_MACHINE/Ctios/CTIOS_instance name/Server/Agent/WrapupStrings/Incoming
    Regards,
    Ashfaque

  • CTI Toolkit Agent Desktop tool on top

    Hi,
    we use CTI Toolkit Agent Desktop tool 8.0(3) and we'd like that this software will be on top always.
    I have tried found some workaround (registry key) and I have not found it. do you know how can I configure the windows behaviouf always on top ? thanks.
    Alberto

    Alberto,
    The Autohotkey script at the link Gergely provided is a pretty lightweight solution for this. Autohotkey.com has a lot more information about that software... I've used it before and it's pretty handy. You could potentially create an Autohotkey script that will run the CTI toolkit executable, wait for the window to appear, and then set the "Alwaysonop" property... this would prevent needing to press the Ctrl+Space key combination to turn on the always on top portion.
    -Jameson

  • How to set the message in the status bar...

    hai,
    how to set the message in the status bar...
    let us say "inserted data successfully, or opening page followed  by the link clicked on the screen....."
    kindly help me out

    sunil,
    do not use advise by Ashutosh with WebDynpro.
    Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
    wdComponentAPI.getMessageManager().reportSucces("Record inserted"); 
    VS

  • How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

    How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
    The following is my configuration in the conf\mapViewerConfig.xml:
    <map_data_source name="mvdemo12"
    jdbc_host="127.0.0.1"
    jdbc_sid="orcl12c1"
    jdbc_port="1522"
    jdbc_user="mvdemo"
    jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    editable="true"/>
    <!--  ****  -->
    But it does not work.
    After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
    Does anyone know it?
    Thanks,

    For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
    //mypdb1.foo.com as described in the README,
    - MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
      <map_data_source name="myds"
        jdbc_host="foo.com"
        jdbc_sid="//mypdb1.foo.com"
        jdbc_port="1522"
      />
    For 11.1.1.7.0 use a container_ds instead.
    i.e. instead of using
    <map_data_source name="my_12c_test"
                       jdbc_host="mydbinstance"
                       jdbc_sid="pdborcl12c"
                       jdbc_port="1522"
                       jdbc_user="mytestuser"
                       jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                       jdbc_mode="thin"
                       number_of_mappers="6"
                       allow_jdbc_theme_based_foi="false"
                       editable="false"
       />
    use
      <map_data_source name="my_12c_test"
                       container_ds="jdbc/db12c"
                       number_of_mappers="6"
                       allow_jdbc_theme_based_foi="false"
                       editable="false"
       />
    In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
    Property
    url  jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
    Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
    Add a JDBC resource for that newly created pool
    Use that in mapviewerconfig.xml as above

  • How to deploy the Workspace Agent Services as a Window Service!

    Hi all,
    does anyone know how to install the Workspace Agent Service back as a Windows Service after i re-installed an reconfigured the workspace completly i do not see the Agent anymore in my Windows Services. I sure would like to avoid to have to uninstall and set it up completely again.
    The agent start file is located in common\workspacert\9.5.0.0\bin.
    Your help is much appreciated
    Cheers
    Andr&eacute;

    I hit the same problem after reinstalling workspace.
    It seems that the config tool does not create the workspace agent service on subsequent configurations.
    A quick search of the configtool.log from the original installation/configuration yields the following:
    com.hyperion.avalanche.config.CoreService, INFO, Running command: D:\Hyperion\common\workspacert\9.5.0.0\bin\wksagent.exe -RegService -Auto -Name HyS9Core1 -DisplayName Hyperion Workspace - Agent Service -Description HyS9Core1, Provides service infrastructure to run services locally
    Dropping the above line at the command prompt fixed the issue for me.
    Cheers,
    Aaron
    Edited by: user8871938 on 15-Feb-2010 06:56

Maybe you are looking for

  • How to find the number simultaneous call at a given moment on UCCX ?

    Hello, I would to know how to find the number simultaneous call at a given moment on UCCX ? it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help. Aubert

  • Hp officejet 4620 all in one

    I recently replaced my old modem & router with a new Gateway AGT784WNV Wireless Router.  I have a iMac running OS 10.7.5.  I could not use the wi fi to connect to printer as I could not locate the Network.  So I bought a 2.0 USB and connected it and

  • AV/AS configuration - external mails are not getting scanned

    Hello, I am configuring AV/AS for MS 7. My local mails are going through the AV/AS. Logs shows that, however for external domains - gmail, yahoo....etc...its not going trhough AV/AS. what am I missing? my mappings file have CONVERSIONS in-chan=tcp_sc

  • Error file photoshop -1

    When I render the animated menu, this message appears: "error with Photoshop file -1". So I can't burn any DVDs with animated menus. What can I do?

  • FCE 1.0.1 Can't Import "Original" JPEGs - FCE 3.0 Can !

    Not a serious problem - just a puzzling quirk. When I try to import JPEGs which have been produced by my digital camera, FCE 1.0.1 shows them greyed out and impossible to select. However, if I make a copy (or in any way manipulate the JPEG) in Photos