How to set custom aspect ratio for vertical video?

I need to have a vertical video (720x1080) rather than 1080x720. In the old FCP under project properties, one was able to change the ratio without a problem. On FCP X, the only formats avaible are all horizontal. Am I missing something? Help-thanks!

Thank you Tom. That was very helpful! Is there away to make it export on those dimmensions too? with the compund clip I got it to look good, but the export option is only 1080x720 with black on both sides.

Similar Messages

How to set custom master page for social/sites.aspx in sharepoint 2013

How to set custom master page for social/sites.aspx in sharepoint 2013.?
File path is
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\SocialDataStore\SocialDataStoreList\sites.aspx
Thanks in advance

Hi,
You could open the sites.aspx in Notepad or SharePoint designer, and set the master page to your own master page directly via editing:
<%@ Page language="C#" MasterPageFile="~masterurl/custom.master" Inherits="Microsoft.SharePoint.Portal.WebControls.FollowedContentWebPartPage,Microsoft.SharePoint.Portal,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
%>
Regards,
Rebecca Tu
TechNet Community Support

How to Measure Custom Aspect Ratios???

I am curious about how to measure custom-made aspect ratios, for example, when using the "Widescreen" matte filter in FCP5, I select the "1.85:1" setting. If I increase the "border" setting to "10" does that make it 1.95:1? Thanks very much for your help!
- Jordan

Please refer to the following thread for info on this matter:
http://discussions.apple.com/thread.jspa?threadID=340553&tstart=0
- Jordan

How to set viewer aspect ratio to 1920 x 1080

I opened a new project, imported a 1920 x 1080 .Mov file and placed it on the time line. However, the viewer window, set to "Fit" is in a 4 x 5 std format and I cant see how to change to a 16 x 9 format.
Thanks for your help

I closed the project, opened and then set the aspect ratio in the settings dialog. I thought that this could be set after opening the project.
However, this time, after dropping the .Mov onto the time line, I have sound, but the audio sound track is empty. I need to see the audio waveform. The viewer is now in the correct format, 1920 x 1080.
In the project that I had the viewer in a 4 x 5 format, the audio tracks showed sound
Thanks

How to set custom master page for sharepoint application page ?

Hello,
I need to apply custom master page for the custom application page I created for login purpose.
Can anyone please let me know how to apply master page for custom application page ?
Note : I need to set custom master page for application page at web application level.
thanks,
Dipti Chhatrapati

Hi Dipti,
You can use the same reference as ASP.NET
Example
"<%@ Page Language="C#" masterpagefile="../_catalogs/masterpage/minimal.master" title="teste" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" meta:webpartpageexpansion="full"
meta:progid="SharePoint.WebPartPage.Document" %>"
You can use SharePoint Designer 2010
http://www.microsoft.com/download/en/details.aspx?id=16573 to make the reference from you aspx page to you custom masterpage.
When you are editing a aspx page you can go to ribbon "Style" and attach the custom Masterpage.
André Lage Microsoft SharePoint, CRM Consultant
Blog:http://aaclage.blogspot.com
Codeplex:http://spupload.codeplex.com/http://simplecamlsearch.codeplex.com/

How to change custom aspect ratio in Lighroom 5.

I am having trouble changing custom aspect ratio in lightroom 5. I can change it in 3 but it doesnt work in 5?

Custom aspect ratios are just that, ratios. There is no size involved. You control size in the print module or in the export dialogue. There is no provision in Lightroom itself to change the size of the image. Lightroom imports the image taken by the camera and displays all the pixels. Any sizing that you want done is enter your control using either Lightroom features. The original image size cannot be changed.

10.6.6 - How to set custom view options for specific folders

How is it that Windows has had the ability to ability to set custom folder view options forever and OSX can't. What is the big deal? Just do it. Whenever I set the folder view options it changes the view for all the folders. I can do folder specific changes as long as the finder window is open then I close it and open it again every folder is the same again. It's just an annoyance and it's something so rudimentary it's embarrassing.

Try the following:
I want to have, say, one folder in list view
Open that folder, set it to list view, type command-J, and in the view-options window that opens, check the box at the top for "Always open in list view".
then the subfolder of that folder I want to have in cover flow view. permanently.
Open that folder, change it to cover-flow view, and in the view-options window check the box at the top for "Always open in cover-flow."
Those two folders should "remember" the custom views that were set for them.
There's additional discussion about the meaning of the"Use as defaults" button in this thread
http://discussions.apple.com/thread.jspa?messageID=13063792
My own take is that folders that have not been customized by checking the "Always open in xxx view" box will by default open in the same view (icon vs list vs column, etc) that was in effect for the previously opened folder. *Within each view*, you can set the default parameters (text size, etc) for a new folder by setting up a folder the way you like and then checking the view options box for "Use as defaults" at the bottom.

Custom aspect ratio for Iscorama footage?

I'm planning on shooting some video with an Iscorama anamorphic lens on a Canon EOS 6D. The Iscorama gives the image a 1.5X horizontal squeeze that must be decompressed for the footage to be viewed normally. What I need to do is adjust the aspect ratio in iMovie '11 so that the horizontal dimension is expanded 1.5 times, while the vertical dimension retains its original value. This will result in the original 1.5:1 aspect ratio being rendered as 2.25:1. Is this possible to do in iMovie '11?

Leigh Hanlon wrote:
… Other than buying FCP, is there a less-expensive way to accomplish this?
best to my knowledge, only the 'pro' versions of NLEs (FCP, Premiere, Avid) offer this feature.
… but you spend so much money on a superb cam - give it an approbiate edit app

How to obtain proper aspect ratios for sequences in Premiere Pro?

I'm posting it here, because I use AE SDK for the effect.
I've got a RED sequence in Premiere that is 2048x1152. The footage is 2816x2304 anamorphic 2:1. The sequence preview is 1920x1080, like any Premiere preset over HD. I can't seem to get the proper size and aspect ratio to resize the UI controls and position the effect.
Normally I'd use this:
scale_x *= (PF_FpShort) in_data->pixel_aspect_ratio.den / (PF_FpShort) in_data->pixel_aspect_ratio.num;
scale_x *= (PF_FpShort) in_data->downsample_x.num / (PF_FpShort) in_data->downsample_x.den;
scale_y *= (PF_FpShort) in_data->downsample_y.num / (PF_FpShort) in_data->downsample_y.den;
But in this case it doesn't seem to work. Also standard procedures for UI resizing from SDK examples fail.
How can I obtain the proper aspect ratio and sizes?
Thanks in advance.

Premiere Pro is not well designed for this type of collaborative work flow. That's not to say something can't be made to work, just that it may not be as seamless as you'd like.
For starters, there's no way to really 'merge' the changes made by two different people working on the same project, so one of the primary rules you'll have to implement is that only one person at a time can work on any given project, and you'll have to be in constant communication as to who is working on which project, with person A leaving it alone until person B gives the go-ahead. At which point B will have to leave it alone until A gives the go-ahead. If you don't do this, your changes will overwrite each other and you'll get nowhere.
Second thing to be aware of is that clip markers are stored with the media, so while sending only the project file back and forth is fine for most things, it won't work with clip markers. You'll also need to transfer whatever media files have the markers. Given the relatively large size of media compared to project files, it may be best to simply forgo using clip makers.
If the hard drive setup is not identical on both machines, you may have to relink the media with every swap of project files.

How to set : Pixel Aspect Ratio?

Hi,
what s'ld i set for my Pixel Aspect Ratio? Square? BTW, Recording using Consumer HD Cam (Panasonic SD100 and Canon HF10) .
and,
what is "Enable 4:4:4 chroma filtering" ? shall i CHECK it?
Thanks for now!

Hi Tom - sorry it has taken me some time to respond:
This is the thread I mentioned previously:
http://discussions.apple.com/message.jspa?messageID=10705428#10705428
In this thread you indicated:
"Hello,
Copy your 7D card data to a dedicated folder, use a card reader, retain all the files on the card.
Then use Log and Transfer in FCP, at that point you can choose to convert to Prores (LT) or
Prores. It works just fine. I suggest you use 30P, it is actually 29.97, and stay away 24P until
you feel comfortable with this workflow. You can use Toast 10 to archive these files.
There are other sites you should explore:
http://prolost.com/
http://philipbloom.co.uk/
They are exploring these new hybrid cameras very actively
Good luck, Tom"
I tried this to no avail. I'm also having problems with some of the 7D raw files (H.264) freezing on a frame 1/3 of the way through - and Quicktime craches - I haven't seen any information in the Apple forums that address this. Thanks for your input!
Paul

Is there a way to set pixel aspect ratio for a project?

This is related to another post I made about using iShowU HD, a screen capture program (for screen casts). On their support page, they show example settings for FCP, but not for FCP X. I was wondering if someone could take a look at that page and decypher that for FCP X. One thing the specify for FCP is to set the pixel aspect ratio to "square pixels", as well as some other things. Also, is it good to use 30 fps?
This is the support page:
http://help.shinywhitebox.com/workflow/final_cut/
Thanks

Set capture size:
Set output video:
Set frame rate:
Set capture options:
Set video and audio format:
Set up the FCP X project:
1080p HD / ProRes 422 / 48kHz...

How to set custom HTTP header for single sign on

Currently we just begin to use an application called "etran". This application requires user name and password to login. Now, my assignment is to integrate etran application in our internal application. This means that somewhere in our internal application, there is a link leads to the etran application.
It is going to be single sign on, that means that once user logs into our internal application, when he/she clicks on the etran link, no sign on to etran is needed.
I consult with the technical people in etran. they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?
Thanks in advance for your help.

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

Aspect Ratio: How do I configure aspect ratio for a wider-pixel projector?

Hi.. I have an HD72 connected to my MacMini (Core Duo); the resulting picture cast on the screen has pixels a bit wider than exected, so all the cute girlies look fat Seriously, if I display a square, it's a bit more of a rectangle, and I'm wondering where I can configure the Mac Mini to alter its resolution or its aspect ratio to comply. A Quicktime-only solution is fine, this doesn't bother me except when watching videos.

Regardless of the display resolution, if your projector is displaying pixels in a slightly oblong fashion then its outside of the Mac's ability to compensate. The most the mac can do aspect ratio-wise, is to set a different number of pixels on the x and y axes, which would create a different screen aspect ratio, but wouldnt touch the pixel aspect ration. Perhaps the oblong pixels are the projector's way of stretching a too-narrow screen resolution to fit the area the projector is trying to cover. You should be able to change the output screen resolution to the projector in the displays system preference. Try several and see which one works best with the projector.

Aspect ratio for a video object

How can you maintain a video objects aspect ratio? The
property maintainAspectRatio seems to work only with the
flvplayback component.

Regardless of the display resolution, if your projector is displaying pixels in a slightly oblong fashion then its outside of the Mac's ability to compensate. The most the mac can do aspect ratio-wise, is to set a different number of pixels on the x and y axes, which would create a different screen aspect ratio, but wouldnt touch the pixel aspect ration. Perhaps the oblong pixels are the projector's way of stretching a too-narrow screen resolution to fit the area the projector is trying to cover. You should be able to change the output screen resolution to the projector in the displays system preference. Try several and see which one works best with the projector.

What is best format and aspect ratio for iPOD video ?

When i use the default QT export to ipod setting it converts the video to 320x240. I dont plan on mainly watching the video on the ipod more from the ipod out to a 16:9 HD TV. What is the largest aspect ration I can encode the video to play on the ipod and play from the ipod to a HDTV? and what format should I use I dont care about file size I want best quality.
Thanks

Hi:
Probably this tutorial could be helpful: http://www.kenstone.net/fcphomepage/video_to_ipodstone.html
Hope it helps !
Alberto

How to set custom aspect ratio for vertical video?

Similar Messages

Maybe you are looking for