How to set custom shortcuts for Styles in Pages 5.1?

I just updated Pages to version 5.1. It said, that it will bring back the feature where you can use different shortcuts for specific styles. How can you do that? Anyone figured it out yet?
Thanks,
Mark

Peter thank you very much! I owe you one
It was way easier back than. I was so mad that the just put it back in this recent version. It drove me crazy.
Thanks,
Mark

Similar Messages

Keyboard shortcuts for styles in Pages

Not a question but rather a feature request: let me add my own shortcuts for styles, please. This is essential for me - and a lot of other people, right? Please reply if You think that this feature ist important.
KInd regards, Marin

It was important but was crippled by being the function keys and only the function keys, which then interferred with the other function key uses.
This works when it is handy, simple and organised like the single key shortcuts on the numeric keypad in Quark Xpress.
Peter

How to set custom widths for a particular report column?

how could I set a custom width for a particular report column? Is there a way to do it using css?
Thank you.

Hi Leland,
I have tested this here: [http://apex.oracle.com/pls/otn/f?p=267:18]
All I have done is add the following into the report's Region Header:
<style type="text/css">
#apexir_EMPNO {width:200px}
#apexir_ENAME {width:200px}
#apexir_DEPTNO {width:200px}
.apexir_WORKSHEET_DATA TR TD {height:100px;}
</style>The headers have all be set to be left-aligned. Each column should be 200px wide (even though I'm setting the width on the headers, it will be applied to the entire column unless a cell's contents is wider, in which case the column is made wider). The final entry above adjusts the height of all TDs within the IR table.
Andy

How to set mac shortcuts (for mac and windows OS)

i am having a bit of an issue.
i run windows 7 and mac os on the same computer on different hard drives in this computer. i also have a "mac" keyboard. i am not sure how this may be different from a "windows keyboard" but the point is i need to use this keyboard because it matches the one on my laptop which is a mac.
when i switch to windows on this machine i always end up deleting information because the CMD + X and CMD + V cut and paste shortcuts on Mac OS are not the same in windows. windows requires (currently) CTRL + X and CTRL + V. so when i got to cut and paste in windows CTRL + X (this is my habitual way of working) and then i run a CTRL + V i end up writing /over/ the text i selected with a "x" and i end up pasting /over/ the text i selected to paste over with a "v". this is because instead of running a cut and paste, this set of shortcuts in windows simply enters "x" and "y" respectively since the shortcut is not active.
does anyone know where i set these in windows OS and in mac OS?
also, does anyone know if it is possible to set how many UNDOS i can do in either of these OS's or to know how many i can in fact undo?
THANKS
long story background:
1. while i may move to a windows keyboard on the computer i am using (because the mac keyboards these days end up losing keys and they end up very wobbly) i cannot do this for the laptop machine so this may not make a lot of sense if i end up also running windows on the laptop which is my intention at some point.
2. CTRL + X is a very long stretch on the mac keyboard so rather than switching mac shortcuts to accommodate windows shortcuts i am thinking to switch windows shortcuts to mac ATM.
3. this is no small issue! i just went to copy and paste this text so i could save it for myself in order to explain to someone else and i ended up overwriting with a "c". if i had not thought fast and remembered to UNDO by hitting CTRL - X and not CMD - X i might have lost all my work.

long delay - no email of your post here
I also realise that you can use system preferences - Keyboard - modifier keys to make cmd = ctrl or vice versa
I'd surely ask/read elsewhere about altering windows, given the reach issue - but no qualms beyond confusion if switching/using other machines. You might soon find you switch layouts mentally, quite easily.
more to read:
Remap Copy and Paste shortcuts on a Mac - Super User
Remapping Keys and Buttons
Microsoft Windows Keyboard remapping
How to: Remap Apple Keyboard Command Keys to Control Keys

Not able to set custom shortcut for increase/decrease brush size in Photoshop CC 2014 on Win 8

I am using Windows 8 and PS CC2014 and the issue is that I can't assign custom shortcut to the dot. I have been using , and . as decreasing and increasing brush size and it has worked well in every photoshop, even cc2014 in win7 but not in win8 it seems. It lets me to change the , and just tells me that it is in use in somewhere else but i can still change it. But I can't do the same with . as it complains it being used by an application although I have cleared that from the original place and left it empty, photoshop still recognizes it if I press it although it would be empty but I can't assign that key to anything else either.
Small thing but drives me crazy as I had to assign it to another keys and I am using the shortcuts from muscle memory mostly and end up changing the brush when I had an intention to increase the size. I tried to google this but couldn't find anything similar solution.

I didn't manage to get it to work :c Restart won't do anything and I tried to reset the preferences by deleting manually the file with keyboard shortcuts. I managed to get them to the factory settings but that was about it. Everytime I try to assign "." to somewhere (including to the place where it already is), it gives the red x and says "the shortcut is not valid. It is being used by another application." (not sure what it is in english exactly, I happen to have my PS in finnish unfortunately ). Plugin disabled mode did nothing either.
I have changed that shortcut many times to different versions earlier and this is first time I see that message or am not being able to change the shortcut. And I installed the photoshop yesterday from fresh and first thing I did was making the shortcuts and it gave the error from the first use.

How to set keyboard shortcut for popup enter as spacebar?

I want to create a shortcut where I can use a spacebar for all the popup's action.
It is very cumbersome, to scroll to the popup and then select an action for the popup.
It would be very easy, If I can use tab to scroll amongst the option of popup and press spacebar to select an action.

See System Preferences > Keyboard > Keyboard Shortcut > (at the bottom) Full Keyboard Access > select "All controls."
This will probably help, but your mileage may vary. See:
http://en.wikipedia.org/wiki/Dialog_box#Application_modal
And I would use the return key, and not the space bar.
Jim

How to set Keyboard shortcuts for Flash Pro CS6?

I have started to use Flash Pro CS6, but my keyboard shortcuts such as F6 to insert a new Keyframe didn't work..I soon found that you could create your own Keyboard Shortcut list within the Flash application, and I am trying to enter F6 for a new Keyframe, but it only lets me enter one letter/number at a time and deletes the other one. I have made sure that F6 isn't in use. It now isn't, any help would be appreciated.
Thanks.

if no shortcut works, try resetting your flash pro preferences:
Hold down Shift+Ctrl+Alt (Win) or Shift+Command+Option (Mac) when starting flash pro.
for more info:
http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

Does any know how do set custom notification for email.

I have down loaded a coulple tones for ring tones and email notifications, but know matter where I put them they don't show up in my list of tones.

Ringtones/mp3s should be placed in your Ringtones, Notifications, or Alarms folders, depending on how you want to use them.

How to set an 'alias' for a JSP page in web.xml

Hi
Suppose I have a JSP page called SimplePage.jsp and I want to refer to it by someother name while running the application how do I do this in the web.xml file. I have used <servlet-mapping> to do this in the case of a servlet. However I am not sure how to do this with a JSP
Could somebody show me how to do this. I would be very much grateful.
All help appreciated and acknowledged.
thanks in advance
ilango

It worked. The correct web.xml version is as below:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app SYSTEM "http://java.sun.com/dtd/web-app_2_3.dtd" [
]>
<web-app>

<servlet>
<servlet-name>ControllerServlet</servlet-name>
<servlet-class>ControllerServlet</servlet-class>
<init-param>
<param-name>base</param-name>
<param-value>http://localhost:8080/MVCIIapp/servlet/ControllerServlet</param-value>
</init-param>
<init-param>
<param-name>jdbcDriver</param-name>
<param-value>sun.jdbc.odbc.JdbcOdbcDriver</param-value>
</init-param>
<init-param>
<param-name>imageUrl</param-name>
<param-value>http://localhost:8080/MVCIIapp/images/</param-value>
</init-param>
<init-param>
<param-name>dbUrl</param-name>
<param-value>jdbc:odbc:Burnaby</param-value>
</init-param>
<init-param>
<param-name>ilangocal</param-name>
<param-value/>
</init-param>
<init-param>
<param-name>mangla</param-name>
<param-value/>
</init-param>
</servlet>
<servlet>
<servlet-name>Header</servlet-name>
<jsp-file>/MVCIIapp/jsp/Header.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>ControllerServlet</servlet-name>
<url-pattern>/Master</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>Header</servlet-name>
<url-pattern>/Opener</url-pattern>
</servlet-mapping>
</web-app>
I have other jps files too.I am going to try and put aliases for them and see how they perform.
I hope I have not spoken too soon by saying that the aliases work. Let me wait and watch with bated breath.
But thanks a lot for your suggestions without which this would not have been possible
ilango

How to set working-dir for precompiled jsp pages to some where under tmp

If my weblogic application gets exploded into this tmp directory:
D:\bea_domains\my_wl_domain\servers\SERVER001\tmp\_WL_user\mywebapp\wxyzzz\war
where "wxyzzz" is a random directory name generated by weblogic 9.2, how would I set my working-dir in weblogic.xml to store the precompiled jsp classes under:
D:\bea_domains\my_wl_domain\servers\SERVER001\tmp\_WL_user\mywebapp\wxyzzz\war\WEB-INF\classes\jsp_servlet\_jsp directory?
Is there an "expression" or "variable" that will hold the value of the tmp directory? Thanks.

If my weblogic application gets exploded into this tmp directory:
D:\bea_domains\my_wl_domain\servers\SERVER001\tmp\_WL_user\mywebapp\wxyzzz\war
where "wxyzzz" is a random directory name generated by weblogic 9.2, how would I set my working-dir in weblogic.xml to store the precompiled jsp classes under:
D:\bea_domains\my_wl_domain\servers\SERVER001\tmp\_WL_user\mywebapp\wxyzzz\war\WEB-INF\classes\jsp_servlet\_jsp directory?
Is there an "expression" or "variable" that will hold the value of the tmp directory? Thanks.

How to set content type for a JSF page

Hi,
I want to know is there any way we can specify the content type of a JSF page, like in JSPs we have the page attribute <%@ page contentType="application/vnd.ms-excel" %>
In JSP we can create a html table with values and if we specify the contenType as application/vnd.ms-excel, we would get an excel file generated.
But do we have something similar to this is JSF, as I am using Facelets I cannot use page directive in the xhtml file.
I tried setting the content type in MangedBean's action as follows
((HttpServletResponse)FacesContext.getCurrentInstance().getExternalContext().getResponse()).setContentType("application/vnd.ms-excel"); but it did'nt work.
Thanks in advance.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to set custom master page for social/sites.aspx in sharepoint 2013

How to set custom master page for social/sites.aspx in sharepoint 2013.?
File path is
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\SocialDataStore\SocialDataStoreList\sites.aspx
Thanks in advance

Hi,
You could open the sites.aspx in Notepad or SharePoint designer, and set the master page to your own master page directly via editing:
<%@ Page language="C#" MasterPageFile="~masterurl/custom.master" Inherits="Microsoft.SharePoint.Portal.WebControls.FollowedContentWebPartPage,Microsoft.SharePoint.Portal,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
%>
Regards,
Rebecca Tu
TechNet Community Support

How can i set different font for different tabs/pages

I want to set different fonts for different tabs/pages?
is it possible to do the same? If yes how?
I can change the fonts under tools>options>contents>advanced. but that changes global settings.
tried some add ons too- but that too changes the global settings.
some pages like tweetdeck do not display icons etc properly under custom fonts.
when i check "allow pages to select their own font" tweetdeck shows up fine but a number of other pages show fonts that are too big or some non standard fonts.
Is there a way where i can select site default fonts for some sites/tabs, and custom fonts for other sites/tabs?
otherwise i have to open different sites in different browsers- say i use my custom fonts- which apply globally, and open tweetdeck etc in Internet Explorer or Chrome etc. if i can have all tabs in one window/browser, that would be great.

It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

How do I set numbered lists for headings in Pages 5.2, and keep that system of numbered lists saved?

I have tried to set numbered lists for headings in Pages 5.2 but have not succeeded. I have read similar questions concerning this but this has not helped me...
When I say numbered lists I mean something extremely important and simple, for instance:
1. Introduction
1.1. Background
1.2. Purpose and Questions
2. The Legality of Clause X
2.1. Legality under Article 101.1
2.2. Legality under Article 101.3
And so on...
Heading 1. is selected as "Heading", 1.1 is selected as "Heading 2", and if I had 1.1.1 it would be selected as "Heading 3" and so on...
I have navigated my way to the Format window, and under the tab "Style" and down to "Bullets & Lists". I have here selected the following: Numbered, Numbers, 1. 2. 3. 4., Tiered Numbers, Continue from previous.
There are several problems with this currently.
First, based on the example it becomes "2. Background" when it should be "1.1 Background" instead.
Second, after writing some body text between the headings and then select a new heading, all the previously selected settings I mentioned above in "Bullets & Lists" have to be reselected.
So, how do I set numbered lists for headings, or so called sub-headings, in Pages 5.2? And how do I keep that selected system of numbered lists saved so I don't have to retype it for every new heading I type? (e.g. so that Pages knows that every time I choose Heading 2, I want it to number the heading in the way selected)
Obviously, manually writing the numbers for every heading is not a viable option, as it makes table of contents problematic and is simply tedious. You need an automatic way of doing it, especially if you write long documents where keeping headings in order is absolutely essential.
Also, reverting back to previous Pages versions (like v. 9 I think?) is not an option as that does not exist on my recently purchased Macbook Pro.
I need to be able to do this on Pages 5.2 and do it automatically.
I appreciate any help with this.

iWork '09 is not "outdated" it still works and works extremely well and whilst not perfect with MsWord it is far far better than Pages 5.2 which has a stream of major issues with exporting. It is also way better and faster to use than Microsoft Office.
So what is your time and work actually worth? If it is less than $19.99 for 6 months, you may as well just chuck it in and take that job on minimum wages.
You are assuming things for Office 2014 with absolutely no inside knowledge. Much as we assumed Pages 5 was going to be the long awaited improvement, but ended up being a downgrade to match the iOS version, Microsoft is headed the same way with their mobile versions.
This is not like getting the "latest" pair of pants where you go with the crowd and throw out your cigarette legs which replaced the flares, which replaced your low cuts which replaced your cigarette legs, which replaced…
This is work.
If it does the job and does it well, use it. There is nothing out there to really match what Pages '09 does. Yet.
LibreOffice can do most but not all, but has a UI that only a mother could love. It's great redemption is that it uses both open formats and the standard Microsoft formats and is under active development. It also opens and saves to just about everything. When they finally work out the Pages formats, I'm sure they will open those as well.
I use a lot of professional software. Just because the publisher's marketing department says change the product so we can sell more, doesn't mean you have to pay any attention whatsoever. Adobe being a classical example. Most designers are just ignoring their latest subscription based bloatware and getting on with their work.
Peter

How to set custom shortcuts for Styles in Pages 5.1?

Similar Messages

Maybe you are looking for