How to set database name default for oracle discoverer 10g

Hi
Do you have idea of setting the database name default for oracle discoverer 10g

I mean to say while login to discoverer 10g, it will ask for following options. In this Database should select the database name by default instead of any value
          User Name
          Password
          Database
          End User Layer

Similar Messages

How to set -Xss or ulimit for Oracle Http Server

Hi,
We are facing Out of Memory Error in OHS 11g in our cluster environment. Where I can see below statements in http log file:
# There is insufficient memory for the Java Runtime Environment to continue.
# Cannot create GC thread. Out of system resources.
# Possible reasons:
# The system is out of physical RAM or swap space
# In 32 bit mode, the process size limit was hit
# Possible solutions:
# Reduce memory load on the system
# Increase physical memory or swap space
# Check if swap backing store is full
# Use 64 bit Java on a 64 bit OS
# Decrease Java heap size (-Xmx/-Xms)
# Decrease number of Java threads
# Decrease Java thread stack sizes (-Xss)
# Set larger code cache with -XX:ReservedCodeCacheSize=
# This output file may be truncated or incomplete.
# Out of Memory Error (gcTaskThread.cpp:46), pid=17956, tid=140591807985408
When I run the ulimit command on machine, stack size is showing as 10MB:
Result:
[oracle@XXXXXX bin]$ ulimit -a
core file size          (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 1031958
max locked memory       (kbytes, -l) 3500000
max memory size         (kbytes, -m) unlimited
open files (-n) 131072
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 10240
cpu time (seconds, -t) unlimited
max user processes (-u) 131072
virtual memory          (kbytes, -v) unlimited
file locks (-x) unlimited
Setting the stack size to 512KB or 256KB might resolve the problem.
I tried setting ulimit -s 512 in my user bash_profile. and ran ulimit -a , then it is showing as
stack size (kbytes, -s) 512
If I set at user level, does it have any impact? Or we should set at JVM level using -Xss
Can some body tell me where can I set -Xss for Oracle HTTP server 11g?
Regards,
Vidya

Hi Marco,
I believe you'll need to setup a MX record under 'More Actions' for your domain in Site Settings / Site Domains.
Select the option "Use another external service for email" and enter your primary mail server's hostname at priority 10.
Think you can repeat this step for your secondary mail server (priority 20) if you have one.
Regards
Mike

How to set video size default for exporting?

Hi,
I use quicktime conversion to export video out of FCP. My question is how to set a default video size. Under the options I can change the video size to NTSC 720:480 4:3 (and other choices). How do I set that as the default? Everytime I close out of FCP, the setting revert back to compressor native, which is what I dont want.
If anyone knows, please email me at [email protected]
Thanks
Greg

You can't. Use Compressor and build a droplet to the exact specification you want, especially if you're going to be doing that format often.

How to set queue names dynamically for MQ Adapter - SAP XI

Hi Friends
I have a scenario where I should send a message to multiple queues ( more like broadcasting ) using a single communication channel of MQ Adapter. The scenario is like this
1. If the message content contains value '111' then message should go into Queue A, Queue B, Queue C
2. If the message content contains value '222' then message should go into Queue A, Queue B
I will store the content values inside a table ( value and queue names ) and can pick it up inside BPM but want to know how to change the queue name property of MQ series adapter. I will do this inside a loop so the message can be sent to multiple queue names but want to know how to change the queue name property of receiver communciation channel.
I appreciate the help in providing the answer.
thanks
Kannan

Amaresh
Thanks for your answer but my question is specifically targeted towards MQ adapter and the queue name which has to be dynamically changed. I can do the dynamic changes for file adapters but want to know how to change the queue names in message mapping or inside BPM.
regards
Kannan

How to set . orainv in linux for oracle 11g

I am using Oracle Enterprize Linux and have installed 11g. Every time when I restart my PC, I have to set . oraenv to open sqlplus. Could you please tell me whether it is possible to set . oraenv so that I don't have to set it everytime I login.

here is one example of using bash_profile.
http://www.idevelopment.info/data/Oracle/DBA_tips/support_data/Install9iOnRedhat80/.bash_profile
--MM

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

How to set group name as default value in People Picker in Infopath 2010

How to set group name (shareoint Groupname) as default value in People Picker in Infopath 2010

Under the Developer tab in Infopath you can manage Loading Events, unfortunetly i dont have Visual Studio on this PC so i cant laborate, but i believe it's rather simple to figure out.
Edit: Found a easier way, through Data > Default Values.

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

How to set the working directory for reports in linux

Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
Arif

Hi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
++
++
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
++
++
++
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
++
++
++
+</engine>+
+...+
some more definitions
+..+
++
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

"In-Memory Database Cache" option for Oracle 10g Enterprise Edition

Hi,
In one of our applications, we are using TimesTen 5.1.24 and Oracle 9i
databases (platform - Solaris 9i).
TimesTen holds application information which needs to be accessed quickly
and Oracle 9i is a master application database.
Now we are looking at an option of migrating from Oracle 9i to Oracle 10g
database. While exploring about Oracle 10g features, came to know about
"In-Memory Database Cache" option for Oracle Enterprise Edition. This made
me to think about using Oracle 10g Enterprise Edition with "In-Memory
Database Cache" option for our application.
Following are the advantages that I could visualize by adopting the
above-mentioned approach:
1. Data reconciliation between Oracle and TimesTen is not required (i.e.
data can be maintained only in Oracle tables and for caching "In-Memory
Database Cache" can be used)
2. Data maintenance is easy and gives one view access to data
I have following queries regarding the above-mentioned solution:
1. What is the difference between "TimesTen In-Memory Database" and
"In-Memory Database Cache" in terms of features and licensing model?
2. Is "In-Memory Database Cache" option integrated with Oracle 10g
installable or a separate installable (i.e. TimesTen installable with only
cache feature)?
3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
Connect to Oracle" option in TimesTen In-Memory Database?
4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
access will happen only through Oracle sqlplus or OCI calls. Am I right here
in making this statement?
5. Is it possible to cache the result set of a join query in "In-Memory
Database Cache"?
In "Options and Packs" chapter in Oracle documentation
(http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm
#CIHJJBGA), I encountered the following statement:
"For the purposes of licensing Oracle In-Memory Database Cache, only the
processors on which the TimesTen In-Memory Database component of the
In-Memory Database Cache software is installed and/or running are counted
for the purpose of determining the number of licenses required."
We have servers with the following configuration. Is there a way to get the
count of processors on which the Cache software could be installed and/or
running? Please assist.
Production box with 12 core 2 duo processors (24 cores)
Pre-production box with 8 core 2 duo processors (16 cores)
Development and test box with 2 single chip processors
Development and test box with 4 single chip processors
Development and test box with 6 single chip processors
Thanks & Regards,
Vijay

Hi Vijay,
regarding your questions:
1. What is the difference between "TimesTen In-Memory Database" and
"In-Memory Database Cache" in terms of features and licensing model?
==> Product has just been renamed and integrated better with the Oracle database - Times-Ten == In-Memory-Cache-Database
2. Is "In-Memory Database Cache" option integrated with Oracle 10g
installable or a separate installable (i.e. TimesTen installable with only
cache feature)?
==> Seperate Installation
3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
Connect to Oracle" option in TimesTen In-Memory Database?
==> Please have a look here: http://www.oracle.com/technology/products/timesten/quickstart/cc_qs_index.html
This explains the differences.
4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
access will happen only through Oracle sqlplus or OCI calls. Am I right here
in making this statement?
==> Please see above mentioned papers
5. Is it possible to cache the result set of a join query in "In-Memory
Database Cache"?
==> Again ... ;-)
Kind regards
Mike

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

Where to download and how to install X Window System for Oracle Linux 5 ?

Folks,
Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
But I don't know where to download and how to install X Window System for Oracle Linux 5.
Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

You can address the problem in a number of different ways.
You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

How to set database name default for oracle discoverer 10g

Similar Messages

Maybe you are looking for