How to set default browser in blueman?
Hi all,
I've managed to get my bluetooth phone working with blueman ok but when I try to browse a device I get:
Failed to launch "nautilus"
[Errno 2] No such file or directory
You can enter an alternate browser in service settings
I haven't been able to find any worthwhile reference to what the third line means - and not for want of trying. The blueman install only seems to provide ~/.config/blueman/bueman.conf - which is a binary. In fact, `file blueman.conf` returns "8086 relocatable (Microsoft)" which is something I've never come across before.
Does anyone know a solution to this? The Arch wiki describes blueman as "a full featured Bluetooth manager written in GTK and, as such, is recommended for GNOME or Xfce". It doesn't then follow on with "...but only if you install nautilus and a range of other unrelated crap including the whole Gnome Desktop".
Ideally I'd like the blueman browse function to lauch thunar (as would most people who run an Xfce desktop). If anyone could give me any ideas on this I'll be mightily grateful.
Willie
(Who's been with Arch for one week now - something of a seat-of-your-pants experience, but no less wonderful for that)
Many thanks guys for both of your replies.
Yes, it seems the basic problem is lack of obex support in anything other than nautilus.
There's a little on the subject here too:
http://thunar.xfce.org/pwiki/documentat … -obex-send
I also have a need for reliable mobile broadband connectivity via a Huawei USB dongle, so in the short term I've gone back to the outsized Gnome + networkmanager. I'll tinker with Xfce on a separate small partition to see if I can get as I want it.
Arch, though, is brilliant. And this is a friendly, knowledgeable community. I'm having great fun!
Similar Messages
-
[solved] How to set default browser for qt apps ?
hi ,
I'm running a LXDE session and I can't figure out how to set opera as a default browser in qt apps . they default to firefox .
Any ideas ?
Last edited by Nezmer (2008-11-21 11:37:52)grep wrote:
http://kb.mozillazine.org/Setting_Your_Default_Browser
I read this guide before .
The DE I'm running is LXDE and the apps are pure qt4 .
how can this guide be helpful ?
Last edited by Nezmer (2008-11-16 19:06:23) -
How to set default browser for SM_CRM (like Firefox)?
Hey guys,
as in the company environment, IE version is too old for CRM Web UI - performance problem and it can't be changed soon, I'd like to ask how to use SM_CRM (with single sign-on) to open the browser window in Firefox?
Firefox is already set as default browser, but SM_CRM still opens IE.
Any suggestion is welcome!
Thanks!
Krisgrep wrote:
http://kb.mozillazine.org/Setting_Your_Default_Browser
I read this guide before .
The DE I'm running is LXDE and the apps are pure qt4 .
how can this guide be helpful ?
Last edited by Nezmer (2008-11-16 19:06:23) -
Setting default browser?
Hi,
I am using java.awt.Desktop's browse() method to open an url. But if there is no default browser set on user's system it will throw an IOException.
So please tell me how to avoid this exception. or set default browser.
Thanks
lakshyaMaybe some of this info is cached and that cached needs to be cleared (don't know which cache that may be though).
-
How to set default values for boolean columns
I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
SergioIn the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null? -
How to set default reject reason in VA01 (create sales order)
Hi
Everybody can tell me how to set default reject reason for item in sales order.
in our sap system there are a default reject reason as '90'. We want to set it as "Null".
Thanks
HenryHi,
Assigning a default Reason for Rejection is not in standard SAP. I am sure there is some enhancement/user exit which updates the reason for rejection.
Please get the help of an ABAPer, create the sales order in debugging mode and he will find out the logic behind the automatic reason for rejection.
Before that you can find the exits in the include MV45AFZZ for any code related to this.
Hope this helps -
In Transaction code va41 how to set default sales contract start date
Hi ,
In Transaction code " VA41 " how to set default sales contract start date and end date.
Can any one tell me the correct user exit for the same.
Thanks
Basuhi,
u have to use user exits or badis.
use sutable exits mentioned below.
SDTRM001 Reschedule schedule lines without a new ATP check
SDVFX006 User exit: Tax line (transfer to accounting)
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Edited by: katigiri linganna on Apr 28, 2009 12:19 PM -
How to set default file path while downloading alv output
Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh KataraThis information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond -
How to set default User preferences in Analyzer for all users
How to set default User preferences in Analyzer for all users<BR><BR>Hi,<BR><BR>I would like to set some settings in Analyzer as default for all users. For example:<BR>1. Display | Char<BR>2. right mouse click on char | Chart Properties<BR>3. Axes tab<BR>4. "Format: Currency" i would like to change to "Format: Number".<BR><BR>How to set default values to all users? Is this possible?<BR><BR>Thanks,<BR>Grofaty
I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work.<BR>As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to.<BR><BR>HTH
-
How to set default locale in JDK1.3.0 to US?
Hi, everyone!
I found the default locale in JDK 1.3.0 is not set to US when I converted our JDK from 1.2 to 1.3.0. So I have to change code by passing Locale.US.
The output from below test code is:
default=��100.00
US=$100.00
import java.util.Locale;
import java.text.*;
public class TestCurrency
public static void main(String[] args)
int amount = 100;
//default
NumberFormat moneyWriter = NumberFormat.getCurrencyInstance();
System.out.println ("default=" + moneyWriter.format(amount) );
//US
moneyWriter = NumberFormat.getCurrencyInstance(Locale.US);
System.out.println ("US=" + moneyWriter.format(amount) );
Can anyone tell me how to set default locale in JDK 1.3.0 to US?
Thanks!You have to set something on your computer (outside Java) to tell it that you are in the US. You didn't say, but I'm going to guess that you are using Windows; if that's so, then try Regional Options in Control Panel.
-
How to set default view for preview?
Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.
-
How to set default values in initialization event for select option
Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
ThanksSelect option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh -
How to set default values in dialog programming
hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks®ards
kals.it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR -
How to set default value in OAMessageLovInputBean?
Hi,
How to set default value in OAMessageLovInputBean while loading the page?
I have tried the following code but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
SunitaHi Cristoph,
We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
Nay idea if we can achieve this....
Regards
Bhuwan Tiwari -
How to set default selection in html:radio
hai
how to set default selection in <html:radio>.No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)
Maybe you are looking for
-
How to kill Active Data Request in DSO
Hi all, I have 2 dsos ( A, B). Data loads from A to B. Now I have deleted data from DSO B by using option delete data ( did killed one running request by turing the status to RED). when I try to load data again to DSO B, it is not allowing me to exec
-
How to delete a row in target when corresponding row in source is deleted
Greetings Environment: Repository - OWB 10.1.0.4 - going to 10gR2 very soon - IBM RS6000 running AIX 5.3 I have a target table being updated with an INSERT/UPDATE. The user deleted a row in the source table and I want to delete the corresponding row
-
Powermac G5 dual 2.5 issues!
I purchased a pre-owned Powermac G5 Dual 2.5 ghz. It has 4gb ram and is running Mac OSX 10.5.8. Very shortly after I purchased the computer I had a crash and couldn't get it to start back up. I tried to re-install software and it would go part of the
-
Thread Safe Pro*C++
I want to have pro*C++ object that is thread safe. In a method of the object, I give the following code & get a pre-comipler error. xsaLaOracle::connect() /* declare the runtime context */ sql_context ctx; /* enable threads */ EXEC SQL ENABLE THREADS
-
Calculations on hierarchy nodes
Hi, We are developing Divisional P&L Report. We have created hierarchy in R/3 system for this and also loaded successfully in BW. Now the problem is while designing the query, we have to do calcuation on Hierarchy nodes. For e.g. Sales - W (Works) -