How to set default color and font?
Where do I set a default font and color for my outgoing mail? I looked in the preferences but when you change it there, it changes it for all emails, incoming and out going. Isn't there a way to have different fonts for the outgoing than for the incoming??
thanks for your time,
Michelle
I'm glad that other people have had this problem too. I've spent hours on the web trying to find how to select the default composing font colour. I find it incredible that with all the options available in Mail and other mail applications that Apple haven't included this most basic of requirements. It would be lovely if someone from Apple would let us know why this has been left out and if they are going to put it in VERY soon, perhaps as a software update? Mac's still rule though :o)
Similar Messages
-
How to set default currency and Country in R12 financial modules
Hi all,
How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
Can anybody advise ?
Thanks & Regards,Hi,
Change the below profile for the user to a territory different than the US :
In System Administrator, navigate to Profiles -> System.
Select Site, Application, and Responsibility.
Profile options:
Default Country
HZ: Reference Territory
ICX: Territory
Regards,
Raju. -
How to set default value and bg color of cross tab cell?
Hi all
Which way can I set default value and background color for a crosstab cell where there are no any data?
I try to pass it in following way
if isnull(CurrentFieldValue) then
But is has no effect.Hi,
If your field is numeric
if currentfieldvalue =0 then cryellow else crnocolor
if the field is numeric but you don't see the 0 check check if : Suppress if zero is ticked in the Number format tab.
Regards -
How to set default color to e-mail
I want to set a default color for all e-mail messages and although I have tried to set the color it doesn't seem to work ... second day with a mac, so speak slowly.
Also want to set up a signature with the name in one color and address and contact info a different color. I went into mail>preferences>signatures and was able to change font on different lines of signature ... but when I tried to apply colors, it didn't work
Thanks very much in advance for your assistance, halboyehalboye wrote:
I want to set a default color for all e-mail messages and although I have tried to set the color it doesn't seem to work ... second day with a mac, so speak slowly.
that's not possible. you'll have to do it for every message individually.
Also want to set up a signature with the name in one color and address and contact info a different color. I went into mail>preferences>signatures and was able to change font on different lines of signature ... but when I tried to apply colors, it didn't work
that's possible. while editing a signature go to Format menu->show fonts. in the popup click on T with a green rectangle next to it. that's the button for font color. you'll get yet another popup for color. highlight some text in the signature and click on the color you want.
Thanks very much in advance for your assistance, halboye -
How to set default Header and Footer properties for PDF
Hi,
Currently we are manually setting the 'PDF and Print Control' properties for each and every dashboard. We understand that print pdf properties are controlled by pdfstyle.fst file under $SAROOTDIR\web\app\res\s_oracle10\b_mozilla_4 but don't have the exact property names to include in header and footer section.
By default, we want to include company logo, the saved name of the report/dashboard tab and created time in the header. And page# in the footer.
Where can we set these and what properties names should be used in order for these to be set for every new request/dashboard that is created.
Thanks and RegardsHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
How to set default encoding and charsets for jsp and servlets.
Hi,
Is there any possibility to set default encoding or charset for jsps and servlest (for both request and response)?
For example in Weblogic such parameters can be set in weblogic specific configuration files (weblogic.xml).
Thanks in advance.Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
HT2500 How do I change default color and font
Trying to change the default font color of my font when I reply or compose a message and the font window will allow me to change the font style but the color won't budge. d
you cant alas! however you can set your signature with a first letter with the font and colour of your choice
It work well for me and really stop to anoye me to reset each email with the font and colouur I want ! Hopefully Apple smart people can do something on this very basic issue! -
How to set default view and commands
I have Acrobat Standard 9, and I wish to set the default for opening files to a full page view with one-page-at-a-time scrolling. I routinely open many PDF files and have to scroll through the entire document.
I managed to get the full page view to work, but not the full page scrolling . Currently, when I open the document, the mouse wheel scrolls the document continuously several lines at a time. What I want is for the mouse wheel to scroll the document one full page at a time (page up/page down). I can manually set this by selecting the "Full Page" button on the tool bar (the one with the four arrows), however this is another step I have to perform each time I open a document.
Is there any way to set the full-page scroll by default?Thank you for your help with this.
Although I can not fix the default view, changing the document properties at least allows me to regulate how it opens the next time. (Almost as good).
If anyone from Adobe reads this, a tip for the next version: Please include a setting that would include a forced default view. -
How to set default value and after that , use it as control
Hello,
Currently i am making motor driver from labview, and i am facing one problem.
When i connect to my board via labview, it will relay last position to global variable. After that, i have to go to loop, where i can send back modified position to my motor control board
In short, i have to control number, but that number default value should be writtem by another function when i start vi.
any ideas how to do it ?
Solved!
Go to Solution.Let me know if any clarification is needed
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
VI.vi 13 KB -
How to do change color and font
Site
Best to do so in the source document if it is available. If not, in Acrobat Pro XI for PC you can use the Edit Text and Images tool. The font and color appear in the Tools pane under Format. I seem to recall this worked differently in version X.
Hope this helps.
a 'C' student -
How to set default font color in Pages
I don't know why. I did a standard clean install of iWork 08. In Pages, everytime I select to insert a text box, the color of the font defaults to brown rather than black. It's a pain to change it to black all the time. Also I noticed that when I select to insert a line, it also defaults to brown. Any thoughts on why this is happening as the default color and how to fix it?
Also, almost evertime I do the option click on the text box icon to draw a text box, the cursor changes to the crosshair but the box allows me to draw the with size, but the length of the column automatically can't be drawn- it extends instead all the way off the bottom of the page. In other words I can't really draw the text box to the size I need. I'm new to Pages.Fix Your Fonts in Safari 6
Some Safari 6 stuff
TextExpander shell script snippet to set Safari 6 default fonts
Safari 6 on Lion, text much smaller?
Quickstyle - Canisbos
Safari 6 default font way too small? -
I need a way to set the properties of a text box--color and
font of the text inside it--upon an event, wether it's in the
timeline or off a button release or even LoadMovie would work. Is
this possible?
woodburyHi Firstodd,
1. Try re-assigning the text after you set the format:
blackjack.onPress = function() {
var oldText=this._parent.field.text;
var myFormat = new TextFormat();
myFormat.font = "BlackJack";
this._parent.field.setTextFormat(myFormat);
this._parent.field.text=oldText;
I haven't played around with the AS3.0 enough yet but I know
that the
2.0 one applies changes to new text so you need to add "new"
text to the
field by recopying the existing text. Basically...rewrite the
text with
the new format.
2. Your formats are stored in the text field's format
property. You can
either keep a reference to the original format you created
('myFormat'
above), or use:
var myFormat=this._parent.field.getTextFormat();
The text format has a variety of properties you can read such
as font,
size, color, and so on. Have a look at the TextFormat class
reference in
the Flash help. Most of these are completely optional so you
can
set/read whatever you want.
About the text, you simply read or write to the field's text
property
like we did in example 1:
this._parent.field.text="This is new text";
var fieldText=this._parent.field.text;
If you want the user to be able to input text into the field,
make it an
input field:
this._parent.field.type='input';
Otherwise, it's just dynamic:
this._parent.field.type='dynamic';
Do you want it selectable?
this._parent.field.selectable=true;
If it's tall enough to support multiple lines, do you want
multiline
support?
this._parent.field.multiline=true;
Automatic line wrapping on lines?
this._parent.field.wordWrap=true;
You can get even lower-level if you want. You can monitor
what the user
types character by character (assuming this is AS2.0):
function onFieldChanged(fieldRef:TextField) {
trace ('Field now has text: '+fieldRef.text);
this._parent.field.onChanged=this.onFieldChanged;
A field can also cut off if you exceed the available area.
You can set
auto-sizing so that the field adjusts itself to what you
type:
this._parent.field.autoSize='left';
//Use 'center' to keep the text aligned to the center of the
field, and
'right' for right alignment.
Dimensions of the typed text, in pixels, can be obtained
through:
this._parent.field.textWidth;
and
this._parent.field.textHeight;
(You can get the dimensions of the field using _width and
_height but
this is the field size, including borders).
Speaking of borders:
this._parent.field.border=true;
And background...
this._parent.field.backgroundColor=0x00FF00; //green
backrgound
this._parent.field.background=true; //turn it on
I could go on for pages...have a look at the TextField class
to see
everything else you can grab.
The TextField class is the actual field...TextFormat is the
optional
format that's applied to the text.
Hope that helps,
patrick
Firstodd wrote:
> Actually, I did this to embed the fonts I wanted (they
are all non-standard):
>
> The buttons to pick the fonts are broken down, so
graphic and not text. Off
> the the side, out of the canvas, I made a text box for
each font I wanted, and
> put a letter in each, anything would work. I applied the
font to each of these
> letters/text boxes, and then on the properties, I
clicked the "Embed..."
> button, and ctrl-selected "uppercase" "lowercase"
"numerals" & "punctuation",
> for each font on each text box.
>
> Works great, the dynamic text that lets the user types
in changes fonts and
> colors correctly using the script you gave me, even on
computers that don't
> have those ornamental fonts installed.
>
> --
>
> However, I do have a couple questions that any advice
would be appreciated...
>
> 1. When the playing the .swf (which is just 1 frame
stopped), the buttons that
> change the font and color of the named dynamic box--they
have to be pressed
> twice the first time to apply it to the text. But after
it's been applied, and
> you change it, one click will do to get it back to that
color again. I can't
> figure out what would be causing this. My scripts are
all clones of this:
>
on (release) {
> blackjack.onPress = function() {
> var myFormat = new TextFormat();
> myFormat.font = "BlackJack";
> this._parent.field.setTextFormat(myFormat);
> };
> }
>
> changed accordingly for the color buttons.
>
> 2. My next step on this is to, upon the push of a
button, extract the
> information of the instanced text box. As you can see, I
named it "field". I
> don't know where to start with the script for these
kinds of things.
> Properties... I mean what the user has typed, it's
color, and it's font.
> Actually, this needs to go to some sort of check out
system, which I'm not
> familiar with at all, so I'm not expecting a walk
through setting it up, just
> some direction if you could =).
>
> Thanks again
>
> Woodbury
>
http://www.baynewmedia.com
Faster, easier, better...ActionScript development taken to
new heights.
Download the BNMAPI today. You'll wonder how you ever did
without it!
Available for ActionScript 2.0/3.0. -
Plsss help me: how to set default values in html:file and html:radio
Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-) -
Can u tell me how to set the color of the button and its border
hi to all,can u tell me how to set the color of the button and its border
There are sample code on the java.sun.com
http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html
try this web page ... There are lots of examples... Good luck ... "Gan en " -
How to set background color for selected days in DateChooser
How to set background color for selected days. I created
checkbox for each day [Son,Mon,Tue,Wed,Thu,Fri,Sat] and a
DateChooser, I want to change the background color for the selected
day when i click on a button after selecting the desired checkboxs
[ monthly wise/yearly wise]
Thanks in advanceThere is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application>
Maybe you are looking for
-
Problem with Pages in a Report
hi everyone, in a Report where the header displays actual page and maximum of pages like "Page 4/7" it always shows "Page 2/3" even if it only shows 1 Page or 5 Pages... it always says there "Page 2/3" what did i made wrong? thx in advance
-
Multicam editing: Can't get blade to show in angle viewer when trying to edit in Timeline
This problem just appeared. I have done lots of multicam editing in FCPX, it works great. But, today I started on a new video and: - I created the first multicam clip, it looks fine. - I created a Project and appended the multicam clip into the Proje
-
Create PDFs that can be edited in Acrobat Reader?
All, Is it possible to create a PDF (designed in Indesign CC 2014/Mac, and exported as PDF in Acrobat Professional XI) that is then a) editable in Adobe Acrobat Reader XI (11.0.09) and b) is of the quality and has fonts embedded to act as a print qua
-
Cross-references referencing two different elements...
Is there any way a cross-reference can reference two element tags at the same time? My attributes for my xref tag calls for two reference ID tags, but when I used the Special>Cross-references menu, I am only allowed to choose one or the other... When
-
If you pay peanuts etc... 7 phone calls 7 different solutions, none of which helped. Finally engineer arrives,then after he leaves remote doesn't work. Phoned yet again and told remote is broken and sending new one. Checked on internet, re-set remote