How to set default currency and Country in R12 financial modules

Hi all,
How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
Can anybody advise ?
Thanks & Regards,

Hi,
Change the below profile for the user to a territory different than the US :
In System Administrator, navigate to Profiles -> System.
Select Site, Application, and Responsibility.
Profile options:
Default Country
HZ: Reference Territory
ICX: Territory
Regards,
Raju.

Similar Messages

How to set default value and bg color of cross tab cell?

Hi all
Which way can I set default value and background color for a crosstab cell where there are no any data?
I try to pass it in following way
if isnull(CurrentFieldValue) then
But is has no effect.

Hi,
If your field is numeric
if currentfieldvalue =0 then cryellow else crnocolor
if the field is numeric but you don't see the 0 check check if : Suppress if zero is ticked in the Number format tab.
Regards

How to set default color and font?

Where do I set a default font and color for my outgoing mail? I looked in the preferences but when you change it there, it changes it for all emails, incoming and out going. Isn't there a way to have different fonts for the outgoing than for the incoming??
thanks for your time,
Michelle

I'm glad that other people have had this problem too. I've spent hours on the web trying to find how to select the default composing font colour. I find it incredible that with all the options available in Mail and other mail applications that Apple haven't included this most basic of requirements. It would be lovely if someone from Apple would let us know why this has been left out and if they are going to put it in VERY soon, perhaps as a software update? Mac's still rule though :o)

How to set default Header and Footer properties for PDF

Hi,
Currently we are manually setting the 'PDF and Print Control' properties for each and every dashboard. We understand that print pdf properties are controlled by pdfstyle.fst file under $SAROOTDIR\web\app\res\s_oracle10\b_mozilla_4 but don't have the exact property names to include in header and footer section.
By default, we want to include company logo, the saved name of the report/dashboard tab and created time in the header. And page# in the footer.
Where can we set these and what properties names should be used in order for these to be set for every new request/dashboard that is created.
Thanks and Regards

Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan

How to set default encoding and charsets for jsp and servlets.

Hi,
Is there any possibility to set default encoding or charset for jsps and servlest (for both request and response)?
For example in Weblogic such parameters can be set in weblogic specific configuration files (weblogic.xml).
Thanks in advance.

Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan

How to set default view and commands

I have Acrobat Standard 9, and I wish to set the default for opening files to a full page view with one-page-at-a-time scrolling. I routinely open many PDF files and have to scroll through the entire document.
I managed to get the full page view to work, but not the full page scrolling . Currently, when I open the document, the mouse wheel scrolls the document continuously several lines at a time. What I want is for the mouse wheel to scroll the document one full page at a time (page up/page down). I can manually set this by selecting the "Full Page" button on the tool bar (the one with the four arrows), however this is another step I have to perform each time I open a document.
Is there any way to set the full-page scroll by default?

Thank you for your help with this.
Although I can not fix the default view, changing the document properties at least allows me to regulate how it opens the next time. (Almost as good).
If anyone from Adobe reads this, a tip for the next version: Please include a setting that would include a forced default view.

How to set default value and after that , use it as control

Hello,
Currently i am making motor driver from labview, and i am facing one problem.
When i connect to my board via labview, it will relay last position to global variable. After that, i have to go to loop, where i can send back modified position to my motor control board
In short, i have to control number, but that number default value should be writtem by another function when i start vi.
any ideas how to do it ?
Solved!
Go to Solution.

Let me know if any clarification is needed
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
VI.vi ‏13 KB

Plsss help me: how to set default values in html:file and html:radio

Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default reject reason in VA01 (create sales order)

Hi
Everybody can tell me how to set default reject reason for item in sales order.
in our sap system there are a default reject reason as '90'. We want to set it as "Null".
Thanks
Henry

Hi,
Assigning a default Reason for Rejection is not in standard SAP. I am sure there is some enhancement/user exit which updates the reason for rejection.
Please get the help of an ABAPer, create the sales order in debugging mode and he will find out the logic behind the automatic reason for rejection.
Before that you can find the exits in the include MV45AFZZ for any code related to this.
Hope this helps

In Transaction code va41 how to set default sales contract start date

Hi ,
In Transaction code " VA41 " how to set default sales contract start date and end date.
Can any one tell me the correct user exit for the same.
Thanks
Basu

hi,
u have to use user exits or badis.
use sutable exits mentioned below.
SDTRM001 Reschedule schedule lines without a new ATP check
SDVFX006 User exit: Tax line (transfer to accounting)
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Edited by: katigiri linganna on Apr 28, 2009 12:19 PM

How to set default file path while downloading alv output

Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh Katara

This information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How to set default selection in html:radio

hai
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

How to set default currency and Country in R12 financial modules

Similar Messages

Maybe you are looking for