How to set default gateway

I have created two Virtual machine of windows server 2008 R2 (VM1 & VM2 respectively). I am configuring domain controller on VM1 and VM2 will be my member server.
My Host system is windows 7 and my ISP does NOT provide me with a static IP.
When I configure domain controller on VM1 it asks me to configure static IP address first. I have given 10.0.0.2 as a static IP on VM1 and the default value of subnet mask is populated.
For preferred DNS and Alternate DNS server I have given the same static IP address (i.e 10.0.0.2).
Note - As am planning to use the local computer (i.e VM1) as my preferred DNS and alternate DNS.
Q1) What should I set as the 'default gateway' on VM1 ?
Q2) Once I've set up the domain controller, can I configure DHCP server on VM1 and assign IP to VM2 ?
Q3) VM2 being a (domain)member server, can we assign static IP to it ? If yes What would be the values in gateway, Preferred DNS and Alternate DNS field ?

Thanks for answers. Doing this configuration for first time this is little confusing for me.
@Milos
Step No. 15 says
"If you do not have static IPv4 and IPv6 addresses assigned to your network adapters, a warning message might appear advising you to set static addresses for both of these protocols before you can continue."
The warning message did appear.
Before I start to configure Active Directory Domain Services, I
will have to provide a static IP to the system. Correct?
I have two virtual machines (windows server 2008 R2) running on my VMware workstation. I do not require two domain controllers, my requirement is the first virtual machine (i.e VM1) should be the domain controller and the second virtual machine (i.e VM2) should
me a domain member server (NOT a domain controller or a child domain)
As you have explained, that Before you run DCPROMO,
there is following configuration:
IP address            10.0.0.2
MASK                 255.0.0.0
Deafault gateway 10.0.0.1  if
this is IP address of ryour outer.
Preferred DNS     10.0.0.2
I would like to understand, is this what you mean by having a static IP ?
I am pasting three screenshot below,
1st) ipconfig of my host system.

Similar Messages

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default reject reason in VA01 (create sales order)

Hi
Everybody can tell me how to set default reject reason for item in sales order.
in our sap system there are a default reject reason as '90'. We want to set it as "Null".
Thanks
Henry

Hi,
Assigning a default Reason for Rejection is not in standard SAP. I am sure there is some enhancement/user exit which updates the reason for rejection.
Please get the help of an ABAPer, create the sales order in debugging mode and he will find out the logic behind the automatic reason for rejection.
Before that you can find the exits in the include MV45AFZZ for any code related to this.
Hope this helps

In Transaction code va41 how to set default sales contract start date

Hi ,
In Transaction code " VA41 " how to set default sales contract start date and end date.
Can any one tell me the correct user exit for the same.
Thanks
Basu

hi,
u have to use user exits or badis.
use sutable exits mentioned below.
SDTRM001 Reschedule schedule lines without a new ATP check
SDVFX006 User exit: Tax line (transfer to accounting)
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Edited by: katigiri linganna on Apr 28, 2009 12:19 PM

How to set default file path while downloading alv output

Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh Katara

This information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set default locale in JDK1.3.0 to US?

Hi, everyone!
I found the default locale in JDK 1.3.0 is not set to US when I converted our JDK from 1.2 to 1.3.0. So I have to change code by passing Locale.US.
The output from below test code is:
default=��100.00
US=$100.00
import java.util.Locale;
import java.text.*;
public class TestCurrency
public static void main(String[] args)
int amount = 100;
//default
NumberFormat moneyWriter = NumberFormat.getCurrencyInstance();
System.out.println ("default=" + moneyWriter.format(amount) );
//US
moneyWriter = NumberFormat.getCurrencyInstance(Locale.US);
System.out.println ("US=" + moneyWriter.format(amount) );
Can anyone tell me how to set default locale in JDK 1.3.0 to US?
Thanks!

You have to set something on your computer (outside Java) to tell it that you are in the US. You didn't say, but I'm going to guess that you are using Windows; if that's so, then try Regional Options in Control Panel.

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How to set default value in OAMessageLovInputBean?

Hi,
How to set default value in OAMessageLovInputBean while loading the page?
I have tried the following code but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
Sunita

Hi Cristoph,
We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
Nay idea if we can achieve this....
Regards
Bhuwan Tiwari

How to set default selection in html:radio

hai
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

How to set default print orientation in oracle reports 6i?

Can anyone please help how to set default print orientation of Oracle Reports 6i? Currently document is printed in Portrait orientation, but I need to print it in Landscape orientation. Is this possible?

It is solved now. Go to Layout Model -> Main Section, Press F4. In the property pallet select the Orientation that is required to be selected when print is taken for that report.

Plsss help me: how to set default values in html:file and html:radio

Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

How to set default gateway

Similar Messages

Maybe you are looking for