How to set DEFAULT GROUP for a user when I create a user manually thru pl/s

Hi Gurus,
I am creating portal user accounts and groups thru pl/sql calls to
portal.wwsec_oid.create_user_entry
portal.wwsec_api.ADD_USER_TO_LIST
I didn't find any parameters to set the DEFAULT GROUP for the users. I want to set the default group for all my users. I don't want to do it thru portal. Cuz, We have around 1600 users. Please post a reply if you have some info about how I can set this thru code.
Thanks
Raj

You can achieve that using 'wwsec_api.set_defaultgroup'....

Similar Messages

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default language for Portal?

Hi All,
We use EP6.
Default language is not defined and therefore is being set by the browser's language.
Where do I set default language for all users?
(I don't want that the users will be able to change it by themselves by browser/EU role).
I tried to set the "request.mandatorylanguage" and
"request.mandatorycountry" in prtDefault.properties but it didn't help.
Thanks,
Omri

Hi Omri,
are those to parameters
request.defaultlanguage=...
request.defaultcountry=...
set in the prtDefault.properties, and the J2EE Server restarted after the change?
Check out this thread and the link given there for more info: HOW to define the default language in the portal
Hope this helps,
Robert

How to set default time for appointment

When I had snow leopard, the default time for length of an appointment was one hour. I upgraded to Lion and now the default time is many hours. Can't seem to find the area to change the default. Keith

Hello User,
Check this:-
Sasi Nagireddy: How to Set Default Time Zone for all Users in OBIEE?
Thanks,
Sasi Nagireddy..

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

How to set default value for html:file in struts

hi
i am working on an application using struts situation is i am using the
<html:file property="" /> to allow the user to upload file. but i need that a default file should be set so that even if the user donot click browse ie the user wish to upload that default file the default file get uploaded on page submition. Is it possible to set any default value for html:file ...if yes plz provide any suggestion or links how to achieve this. thanks in advance

www.google.com?q=STRUTS+DOCUMENTATION

How to set default group in EXS24 patch?

Hi,
This question is about the EXS24 sampler in MainStage 3. I'm in no way an EXS24 expert, so I'm hoping this is an easy one - I can't find it in the manual anywhere though. I'm working with some EXS24 patches that have been supplied to me for a live project, reproducing the recorded version using those patches. They are set up with keyswitches to select sample groups to allow the use of different articulations. The question I have is how to set the default group - so that every time the patch loads (for example) it selects the legato articulation group, instead of defaulting to staccato as it does at present. I've thought about scripting MainStage to send the keyswitch on load of the patch but that seems like a lot of effort to fix something that surely must be an easy fix I'm missing. From what I can tell, the last group defined is the one that loads automatically - but I can't find any way of changing the order of the groups - I can sort the view, but that makes no difference to the behaviour.

Hello Gaurav,
If I understood correctly, Your requirement is to update People Group segments based on employee category.
Basically you need to update people group values based on employee category before insert into assignment table.
You can acheive this using Dynamic Trigger on Assignment Table.
you need to change the new.people_group_id along with other segment values in this trigger logic.
Following articles will help you steps on how to create dyanamic triggers.
http://oracle.anilpassi.com/dynamic-triggers-in-hrms-payroll-demo.html
http://apps2fusion.com/apps/oracle-hrms/oracle-hr/204-triggers-in-oracle-hrms-and-payroll
Regards,
Saurabh

How to set default directory for SQL LOADER

hi all,
i wanted to know how can we setup a default directory for SQL LOADER if at all we can. i connot place my control and data files in local system and use them at command prompt. rather i wanted to know if we can set default directory that the loader can use. this requirement is basically to enable all the clients to upload the data placed on the server and use the loader utility.
thanks in advance,
Basavraj

Ella,
You don't say which version of SQL Developer you are using via Citrix, but just setting the SQLDEVELOPER_USER_DIR hasn't worked for a long time (see Re: SQLDEVELOPER_USER_DIR does not function anymore). Also, since version 1.5, the default for the user directory (now set via ide.user.dir as shown below) is under the user profile area (relative to %APPDATA%), which you should be able to write to, even on Citrix.
Assuming that neither of those help, you will need to get whoever installed SQL Developer on the Citrix C: drive to modify the sqldeveloper.conf to have a line like, where the path exists for everyone who will be using the shared SQL Developer (assumes everyone has a H: drive):
AddVMOption -Dide.user.dir=H:\sqldeveloperAn alternative (depending on how you start SQL Developer via Citrix), is to create your own shortcut to start SQL Developer with something like:
sqldeveloper -J-Dide.user.dir="%SQLDEVELOPER_USER_DIR%"theFurryOne

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

[CS2/CS3 JS] How to set Default Font for multiple documents

Hello,
How do I set the default font for any new text frames I create.
I have several thousand InDesign templates in which the default font is set to a font that is no longer licenced and therefore requires changing.
I already have a script which will open each template and change the first insertion point of any (empty) text frame to a new font but any new text frames created in these templates still want to use the unlicensed font.
Thanks for any assistance.
Simon Kemp

for existing documents:
app.activeDocument.textDefaults.appliedFont = myDoc.fonts.itemByName ('Arial\tBold');
for newly created ones:
app.textDefaults.appliedFont = myDoc.fonts.itemByName ('Arial\tBold');

How to set default permissions for files and folders

We have mac and windows computers on a network where we use Mac OSX Server 10.4 to share files. When files are created on windows computer, no problem, all users can read/write these files. However on our 2 macs (1 10.3 and 1 10.4), other users are blocked from using the files, only the owner has "read/write", group and others are "read only". As far as I can tell, file sharing is turned on ok in Workgroup Manager for the folders we share files from. How can we establish sharing for all users on our network?

Niel's suggestion is good. You might also try posting your question in the Tiger Server forums. I'm sure Tiger Server has several ways of dealing with this.

How to set default language for typing english if my OS language is russian?

Hi. I cant figure out how to set english as default typing language. Opening Skype, new browser window, vpn client, switches my input to russian (my os language). Especially this annoys if im trying to enter login and password.

oleg.lestat wrote:But still when i setting cursor in Google Chrome addrese bar, or my vpn client password field it switches to russian
Changeing language (e.g. to have english menues or keybord layout) on a system, took place in applications too only if the application supports that language, or uses by default the system librarys to adopt the language settings.
Not all applications use automatically the system librarys of your Mac for language settings or spell checking. Most will do so, some only during installation, some never.
Applications can have own language settings others have only the installation language available.
Have you checked this on Chrome (Wrench -> Options -> Advanced -> Change Fonts and language settings -> Language -> Google Chrome language) and your VPN Client?
Lupunus

How to set DEFAULT GROUP for a user when I create a user manually thru pl/s

Similar Messages

Maybe you are looking for