How to set default size for .chm window?

I know there is an answer at grainge.org, but it seems to be
referring only to a .chm using skins, which I am not.
Anybody know how to make the default size of the .chm larger?
thanks, Leisa

Lacona,
The default window size is set in your windows properties
dialog in RoboHelp. It can also be set manually in the .hhp file
before you compile. If you open the .hhp file in a text editor,
such as Notepad, you will see a [WINDOWS] section and for each
window defined there will be a series of numbers. One of these is a
vector [in square brackets] that defines the original position.
These are absolute screen pixels.
In older versions of RoboHelp, one of which I use, there was
a limit to the size of the window RH would allow but when I changed
the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
Windows properties dialog. I'm not sure how the latest versions
handle this but you might try editing the .hhp with Notepad and
then compiling the .chm.
John

Similar Messages

How to set default size for published SWF in Catalyst CS5.5

I create a 800*600 pixel project in Catalyst CS5.5 and published it as .swf.
But when I opened the published .swf, the default size is smaller than 800*600. I have to resize it by myself.
So is there any method that I can set the default size for published .swf?
Thank you guys! Best regards.
Nick

When you start new Flash Catalyst project, you have the option to enable resizing
This setting is enabled by default.
If you need to change this later, you can go into Modify > Artboard settings.
Now when you publish your project, the width and height will be used instead.
As to manually editting the HTML file, there are 3 tag sets that define the width and height of the project (to handle various browsers). You will need to adjust the values in each of those tag sets. You should only need to do this if you can't republish the file.
Chris

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set percentage size for layout? for example : VBox,HBox,AnchorPane,.

how to set percentage size for layout? for example : VBox,HBox,AnchorPane,......
like HTML
<div width="640px" height="480px">
<div widht="50%" height="60%"/>
<div widht="30%" height="60%"/>
<div widht="20%" height="60%"/>
</div>
-----

This is not supported. You can file a feature request at http://javafx-jira.kenai.com

How to set the size for height of iView tray?

Hi,
I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
But the size of tray/window which is displayed in the page is very small.
How to increase the height of that Tray/window/iView containing my component?

Hi,
By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
to do this follow the setps:
goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
if you want the end user to modify this property set the property to read/write .
*********please reward points if the information is helpful to you********************

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

How to set default language for Portal?

Hi All,
We use EP6.
Default language is not defined and therefore is being set by the browser's language.
Where do I set default language for all users?
(I don't want that the users will be able to change it by themselves by browser/EU role).
I tried to set the "request.mandatorylanguage" and
"request.mandatorycountry" in prtDefault.properties but it didn't help.
Thanks,
Omri

Hi Omri,
are those to parameters
request.defaultlanguage=...
request.defaultcountry=...
set in the prtDefault.properties, and the J2EE Server restarted after the change?
Check out this thread and the link given there for more info: HOW to define the default language in the portal
Hope this helps,
Robert

How to set default time for appointment

When I had snow leopard, the default time for length of an appointment was one hour. I upgraded to Lion and now the default time is many hours. Can't seem to find the area to change the default. Keith

Hello User,
Check this:-
Sasi Nagireddy: How to Set Default Time Zone for all Users in OBIEE?
Thanks,
Sasi Nagireddy..

Setting default size for the information area in the main window

Hi, I wonder if there is any way to change the default size of the information area in the main window (lower left corner). I want it a little bigger because I had some useful information set there and I had to change the size every time I log in.
Thanks in advance.

That part of the interface doesn't have an exposed preference to control.
One thing you could do is reorder your metadata fields within the info pane so the most important are listed first and always visible.

How to set image size for importing photos from a digital camera

I'm using Iphoto 6 and am a novice user of my new digital camera. The camera is set to HQ image quality. Initially when I imported photos from the camera into IPhoto, the images were very large (over 1 meg) and produced good quality 4X6 prints. Now when I import photos from the same camera still set to HQ image quality, the photos are very small (less than 100 kb) after being imported into IPhoto. I think I must have changed some kind of setting in IPhoto that affects the size of an imported image, but I can't find where that is or how to change it back so that the size is not changed when imported. Can someone please help me with this? Thanks!
IMAC G5 Mac OS X (10.3.9) my other computer is a Dell Dimension L500CX running Windows XP Pro

Dave, thanks for clarifying Toad's response for me - I was just too ignorant to connect the dots from his responses. As you said, there were 2 versions - 1 in the original folder and 1 in data; the original folder had the photos that were 1 mb. We must have pulled from that folder previously to print photos not realizing they existed in 2 places. So when we found these thumbnail photos, we just thought they were the real thing. Where can you go to learn about the struction and hierarchy of the photos in terms of what Iphoto does to an image when you import it? Is it in Iphoto help somewhere? Thanks so much for your help with this, and you too Toad for leading me down the path.
If you're getting the size from Finder, I think Old
Toad's question makes a lot of sense. Is the file
you're looking at, somewhere in a folder called
"Data" in iPhoto Library? That 56k sounds about the
right size for a thumbnail.
If you do a search for the image name, both the
actual photo and the small thumbnail are stored with
the same image, e.g. abc.jpg
IMAC G5 Mac OS X (10.3.9) my other computer is a Dell Dimension L500CX running Windows XP Pro

How to set default preferences for an enterprise rollout installation?

How do I establish my own default skin, color scheme and canvas size for an enterprise-wide rollout of X2008 SP3?
I have found the Xcelsius.ini file in the root install directory (C:\Program Files\Business Objects\Xcelsius).
If I change the skin value in this file to Nova, Xcelsius correctly sets the skin to Nova when running the app. But it completely ignores my changes to width, height, and colorScheme.
Is there some other location where these preferences are stored?
Also, where are my custom color schemes stored? I would like to include those in my enterprise-wide rollout as well.
Thanks!
Chris

I found my own answer to this question. The only xcelsius.ini file that seems to matter is the one in the user's Application Data folder under C:\Documents and Settings. Also, any custom color schemes are stored there as well.
So for our enterprise-wide rollout, we will just place our versions of those files in that location.

How to set default language for typing english if my OS language is russian?

Hi. I cant figure out how to set english as default typing language. Opening Skype, new browser window, vpn client, switches my input to russian (my os language). Especially this annoys if im trying to enter login and password.

oleg.lestat wrote:But still when i setting cursor in Google Chrome addrese bar, or my vpn client password field it switches to russian
Changeing language (e.g. to have english menues or keybord layout) on a system, took place in applications too only if the application supports that language, or uses by default the system librarys to adopt the language settings.
Not all applications use automatically the system librarys of your Mac for language settings or spell checking. Most will do so, some only during installation, some never.
Applications can have own language settings others have only the installation language available.
Have you checked this on Chrome (Wrench -> Options -> Advanced -> Change Fonts and language settings -> Language -> Google Chrome language) and your VPN Client?
Lupunus

How to set default program for pdf files

I was wondering if anyone knows how to change the default program for opening a file type. For example I would like to set Adobe Acrobat as my default program for opening pdf files instead of preview
thanks

Hi and Welcome to Apple Discussions
Control-click a pdf file and choose "Get Info". In the Info window choose which application to open the file with and then click on the "change all" button. Voila!
Matthew Whiting

How to set default size for .chm window?

Similar Messages

Maybe you are looking for