How to set default value for a drop down in Mobile Application Studio
Hi,
We have a requirement in which for a drop down - Transaction type (Activities), the value should be defaulted to 'Visit' and the Activity Category should be 'Sales Visit'. I tried debugging the code and got the piece of code where this value is referred, but i'm unable to find out the location where this value is picked from. Also while opening up the properties corresponding to this, there is a default value tab in the properties pane. I tried by giving this default value, but didn't work. When I'm trying to revert the changes i've made in the property, it is showing up an error.
Any pointers on this would be of great help.
Thanks in advance,
Rasmi.
Hi Rasmi,
You can default the process type field of BOACTIVITY by different ways-
1.In BOL, business object BOACTIVITY loaded event, check the parameter bIsNew and then default the value of process type if you want it only for new activities.
Other attributes currently get defaulted in the attributechanged event of BOACTIVITY where field is processtype.So if processtype is defaulted it will try to default other attributes based on that.It will pick values from the customizing maintained in SPRO->CRM->Transactions->Basic Settings->Define Transaction Type->Customizing Header.
2.You can also do defaulting in the UI.If you want to default one field based on a value selected for drop down, then write the code in the onselected2 event of the drop down.
In your specific case, best way is to use option 1.
Regards
Vivek
Similar Messages
-
How to set default values for boolean columns
I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
SergioIn the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null? -
How to Set default value for taxonomywebtagging control with terms and nested terms
Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support -
ADF 11g - Query Component - How to set default values for search criteria
I have defined a VO with named query (with 2 search criteria). I created a page and drop a query with table. It works just fine until this point. My requirement is to set a default values for the two search criteria. For example, I have release and category criteria where they are set to use a drop down. I would like to default the values for the drop down when the page is shown up the first time and query the result right away. Is there a way declaratively or I have to create a custom query?
Thanks.I figured this out. Thanks.
-
Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu NHey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS) -
How to set default value for vc2_255_arr in plsql parameter directive?
Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwongMy plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
type vc2_255_arr is table of varchar2 (255)
index by binary_integer;
vc2_255_arr_default vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
vc2_255_arr_default (1) := 'abc';
vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
arr pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
for i in 1 .. arr.count
loop
dbms_output.put_line (arr (i));
end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %> -
How to set default value for html:file in struts
hi
i am working on an application using struts situation is i am using the
<html:file property="" /> to allow the user to upload file. but i need that a default file should be set so that even if the user donot click browse ie the user wish to upload that default file the default file get uploaded on page submition. Is it possible to set any default value for html:file ...if yes plz provide any suggestion or links how to achieve this. thanks in advancewww.google.com?q=STRUTS+DOCUMENTATION
-
CRMD_ORDER: how to set default values for Requester and Change Manager
Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason -
How to set default value for Zfeild using statusprofile
hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita -
How to set default values for inputs?
I have several inputs which are always initialized with 0 when I start the VI. I'd like save own default values for them. I've already tried just setting the numbers and saving the VI but it did not work.
If you want to make any data in any controls, Arrays you can right click on it select >Data operations>Make current values default or you can select EDIT in tool bar, click on Make current values Default.
First, enter the data you want in the control or array and then follow the things Geeta said.
Post if any other help required.
Message Edited by mathan on 12-05-2008 12:07 AM -
How to set default value for drop down box in jsf
Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AKHi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK -
How to set default value for Price Change Indicator in Purchase order
Hi,
While creating the service purchase order with item category "D" the price change indicator in the services tab of the purchase order is getting checked by default. I want to uncheck this by default.Where can we set the default property for this.
Thanks in Advance!
SuryaMy plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
type vc2_255_arr is table of varchar2 (255)
index by binary_integer;
vc2_255_arr_default vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
vc2_255_arr_default (1) := 'abc';
vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
arr pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
for i in 1 .. arr.count
loop
dbms_output.put_line (arr (i));
end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %> -
How to make default value in a drop down list
Hi,
I have created a drop down list using Selection-Screen code. I have three values in it. I would like to make one of the option as a default value. How to achieve it?
I am working on module pool program. I have few screens as a part of my program. I have created print button on tool bar of one screen but that print button is appearing on the other screens too. How to avoid it?
Help would be appreciated...
Thanks
Edited by: mohammed ibrahim on Oct 10, 2008 8:43 PM1) let drop down box be g_dd.
if g_dd is initial.
g_dd = option2.
endif.
2)
by default same pf-status is used by all the screens in the same program
if sy-dynnr = 'screen_no'. " for screens for which you do not want button to come
set pf-status 'abc' excluding 'fcode_of_button'
endif.
or
data: git_fcode type sy-ucomm with header line.
git_fcode = 'fcode_of_button'.
append git_fcode.
if sy-dynnr = 'screen_no'. " for screens for which you do not want button to come
set pf-status excluding git_fcode
endif.
Edited by: Amit Gupta on Oct 11, 2008 11:36 AM -
How to set default value to current date in Webcenter Imaging Application?
Hi
I have created an application in Webcenter Imaging and have a field called as ScanDate.
While uploading documents against that particular application, i want that ScanDate field should default to Current Date.
I tried setting the default value but it becomes a static date.
Can anyone suggest me what to do in this case?
Regards
ACMYou can't do that anyway. The default values are saved as part of the VI and a built application can not do that. Instead, you will have to do this yourself by saving the data to a file, loading it and wiring it into a local variable of the control. You can do this, for example, with the configuration file VIs or, if you want to rely on the good work that other people already did, you can go to the OpenG site and download their file package, which includes saving control values to INI files.
Try to take over the world! -
Setting default value in dynamic drop-down menu
Hi,
I created a simple drop-down menu that can be used to edit an
existing record or to create a new record.
When creating a new record, I'd like the drop-down menu to
display "Not specified" by default. Could anyone help me with this?
The "Not specified" option in the drop-down menu should refer
to record ID 11 in my database table entitled "names".
Here's what my code looks like so far.
The db queries:
<CFQUERY DATASOURCE="DATA" NAME="get">
SELECT *
FROM names
order by name
</CFQUERY>
<CFQUERY DATASOURCE="DATA" NAME="quo">
SELECT *
FROM quotes
WHERE quoteID = #quoteID#
</CFQUERY>
This part is for the existing database record:
<select name="frn_ID">
<cfoutput query="get">
<option value="#id#"<cfif id is quo.frn_ID>
selected</cfif>>#name#</option>
</cfoutput>
</select>
Here is where I'd like the ID with a default value of 11 to
be displayed:
<cfelse>
<select name="frn_ID">
<cfoutput query="get">
<option value="#id#">#name#</option>
</cfoutput>
</select>
</cfif>
Thank you for any help with this!
LukeThank you.
I added this line:
<CFSET ThisOne = 11>
and then edited the drop-down menu to appear like this:
<select name="frn_ID">
<cfoutput query="get">
<option value="#id#" <cfif ThisOne is ID>
selected</cfif>>#name#</option>
</cfoutput>
</select>
Maybe you are looking for
-
Lately, imovie has been locking up, giving me the spinning rainbow ball, whenever I open an existing project. Therefore I can't work on the project, play it or do anything because the spinning rainbow ball won't let anything happen. A typical project
-
I just got the component AV cable but not sure i know how to send the video signal from the iPad to the TV.
-
How to convert a Long data to Date format in LabVIEW 7.0
I am using a ehternet communication between TINI and Labview. From TINI I am throwing Temperature( DOUBLE) and Date and time Information(LONG). When I try to catch it via TCP/IP client in LabVIEW(Simple Data Server Example) it in fact show me the Tem
-
Doubt in PO header & item history
Hi All, I have a doubt .My client has come up with requirement in PO. The header & the item level history in the PO should get updated at the time of PO creation itself with all the relevant fields getting updated. Is there any possibility to control
-
Apple. Please fix Mail for us, your Exchange users. Please.
Don't blame anybody else. Just fix it. Ridiculous that a problem this massive made it into production.