How to set default value to input field dynamically

Hello Experts,
I am using adobe forms inside Webdynpro Java.
Adobe form is having few input fields where at run time i want to assign default value to those fields.
How can i do it ?
Thanks in advance,
Vinay
Edited by: VINAY on Feb 24, 2011 6:39 AM

Hi Mate,
Just set the value to the webdynpro context fields on view init.
if its like that will override the values entered by use on the form.
just check if the default value is equall to the field value if yes leave it, if not dont touch that field.
does this make sense...?
Cheers,
Sai

Similar Messages

  • How to set default value to input field

    Hi Experts,
    I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
    Regards,
    Harish

    Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
    Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

  • How to set default value in one field depending on other field.

    Hi,
    I have one requirement.That is..One seede page having 2 field, one is Lov Input field and one more message choice filed.
    Requirement is after selecting value in Lov input field need to set one default value in to Message choice field. how to do this one.pls send any sample code for this requirement.
    Thanks in Advance,
    Hanimi...

    Hi,
    I used following code
    OAMessageLovInputBean lovbean=(OAMessageLovInputBean)webBean.findIndexedChildRecursive("AssetNumber");
    OAMessageChoiceBean Choicevalue=(OAMessageChoiceBean)webBean.findIndexedChildRecursive("EamWrPriority");
    if (pageContext.isLovEvent())
    String lovInputSourceId = pageContext.getLovInputSourceId();
    if(lovInputSourceId.equalsIgnoreCase("AssetNumber"))
    if(lovbean!=null)
    String slovVal=(String)lovbean.getValue(pageContext);
    String prValue = getPRValue(pageContext.getApplicationModule(webBean).getOADBTransaction(),slovVal);
    //String prValue = "1";
    Choicevalue.setValue(pageContext,prValue);
    }// end of processFormRequest
    private String getPRValue(OADBTransaction con,String slovVal)
    // System.out.println("In WorkRequestDffCO.getContextValue.organizationID" + organizationID);
    String prValue = null;
    String sql = "select decode(ml.meaning,'AC1',1,'AC2',1,'AC3',3,'AC4',3,null) from FND_LOOKUP_VALUES_VL ml ,mtl_serial_numbers msi where ml.lookup_type = 'MTL_EAM_ASSET_CRITICALITY' and msi.ASSET_CRITICALITY_code = ml.lookup_code and msi.serial_number = 'slovVal' ; //'30AC-TR002B'"
    Statement st = null;
    ResultSet rs = null;
    try
    st = con.createStatement(1);
    rs = st.executeQuery(sql);
    if(rs.next())
    prValue = rs.getString(1);
    catch(Exception e)
    e.printStackTrace();
    finally
    try
    if(st != null)
    st.close();
    if(rs != null)
    rs.close();
    catch(Exception e)
    e.printStackTrace();
    return prValue;
    Query is executing but no value is retuning, if i use hard coded value in where condition like '30AC-TR002B' it is tt's returning value .

  • How to set default values to these fields

    Hello,
    I'm new with UCM 11g, and i need to add default values to fields, for example to these fields:
    Type -> Document should be the default and not editable value
    Title -> Should be the name of the file i'm checking in
    Security Group -> it's default and not editable value should be Secure
    How do i set these default values ??
    Regards
    Carlos

    Security Group and Document Type can be defined in your profile (as default values using dprDefaultValue - see e.g. Re: simple profiles and defaulting ). You can also define those fields as 'hidden' or 'info only'
    Title with the name of file is a bit trickier - you cannot define it up-front as you don't know what file will be chosen, do you? You can, however, use a global rule where you can fill in dDocTitle with the value in dOriginalName (or somehow process it, if you will).

  • How to set default values for inputs?

    I have several inputs which are always initialized with 0 when I start the VI. I'd like save own default values for them. I've already tried just setting the numbers and saving the VI but it did not work.

            If you want to make any data in any controls, Arrays you can right click on it select >Data operations>Make current values default or you can select EDIT in tool bar, click on Make current values Default.
    First, enter the data you want in the control or array and then follow the things Geeta said.
    Post if any other help required.
    Message Edited by mathan on 12-05-2008 12:07 AM

  • Not allows to assign default value to input field using values in datastore

    Hi Masters,
    Consider that I have one input field in a form. I should assign default value to it. I should assign to it, the value which i have stored in a datastore. When i run the application, if i give default value as 123 ,then it is working fine i.e., it is showing 123 in the textfield in form , but if i give the default value as STORE@ProductId, then it is not displaying that value in the form.
    Please help me out.
    Thanks & Regards,
    Kaushik Sreeram

    Hi,
    i faced this problem and here's what i concluded:
    There's no way you can set default value for input field dynamicly, since the default value of input control is caculated only once (i think on initializing of the iView). The input control and the data store are initialized at the same time, STORE@productID is empty that time...
    If you don't need to recieve value through the input field you're trying to initialize, but just to display the value from the store - I suggest you try using another control - Expression Box. It's value is calculated continiously, just like the Label's, and you can refere to it later.
    Regards,
    Yulia

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • How to set default values in initialization event for select option

    Abapers,
    I have 3 GL account like 0024831231,0024831238,0024831245.
    Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
    Thanks

    Select option is table <Structure> with fields, low, high, sign & option
    you need to append the value into the select option, with appropriate value in low or
    example:
    S_HKONT-low  = <value>
    S_HKONT-SIGN = 'I'
    S_hkont-OPTION = 'EQ'
    append s_hkont.
    Default value for select-option also can be added directly in select-option statement.
    Regards,
    Mahesh

  • Need to set default values for the fields plant and location in ME21N

    Hi All,
    i need to set default values for the fields plant and location in ME21N tcode.
    In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
    How to resolve this?
    Thanks in Advance

    hi .
    i needed to set default strorage location and plant in personal setting  in me21n.
    i solve it with this way.
    go to program SAPLMEPERS in se38.
    create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
    in this module write:
    if MEPOITEM_PROP-WERKS is INITIAL and  MEPOITEM_PROP-LGORT is INITIAL.
    MEPOITEM_PROP-WERKS = '1000'.
    MEPOITEM_PROP-LGORT = '0032'.
    endif.
    this is the solution.
    best regards.
    maryam

  • How to set default values on the screen painter parameters?

    Hello ABAP Gurus,
    I would just want to ask how to set default values on the screen painter parameters.
    Thank you for your replies.

    Hi,
    To set default values for screen painter parameters initialize the field names with default values in the PBO module....
    say u have the field name as f_field1....
    in the PBO of that screen initialize it....
    f_field1 = '100'  "here 100 is the default value.
    <b>reward points if useful.</b>
    regards,
    Vinod Samuel.

  • How to set default values in dialog programming

    hi gurus
    can anyone suggest me
    how to set default values in dialog programming
    thanks&regards
    kals.

    it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
    MODULE preRender OUTPUT.
      DATA first_time TYPE flag VALUE 'X'.
      IF first_time EQ 'X'.
    *   put your initialization code here
        CLEAR first_time.
      ENDIF.
    ENDMODULE.
    -MiR

  • How to set default value in OAMessageLovInputBean?

    Hi,
    How to set default value in OAMessageLovInputBean while loading the page?
    I have tried the following code but its not working.
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
    Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    OAViewObject poHeadervo =
    (OAViewObject)am.findViewObject("PoHeaderMergeVO");
    PoHeaderMergeVORowImpl poHeaderVoRow =
    (PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
    if (delToLoc != null && !"".equals(delToLoc)) {   
    // poHeaderVoRow.setShipToLocation(delToLoc);
    OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
    msb.setValue(pageContext,delToLoc );
    Please suggest me how to resolve this issue.
    Thanks & Regards,
    Sunita

    Hi Cristoph,
                      We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
    Nay idea if we can achieve this....
    Regards
    Bhuwan Tiwari

  • How to set default value to date type attribute.

    Hi,
    How to set default value to date type attribute.
    E.g I want to set u201C01/01/1999u201D to date attributes.
    First i want to set value and then i want to fetch the same & want to check equals.
    please suggest solution.
    Regards,
    Smita

    Hi,
    In wdinit() method u can set the date
    DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
    Date today = Calendar.getInstance().getTime();
    String reportDate = df.format(today);
    wdContext.currentContextElement().setFromDate(reportDate);
    Another way you have set the this formate like that
    1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
    2. Select the type as "date"
    3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
    4.Bind the context attribute to the type created now.
    Hope this helps u.
    Best Regards
    Vijay K

  • How to set default value of a table using sequence number

    Dear all,
    Does any body know that how to set default value of a table
    using sequence number.
    But I don't want to use trigger to do that.
    Please help!!!!
    Eldon

    Andrew is essentially correct. You can get around the trigger,
    but not the sequence, if (and this may be a very big if) you can
    guarantee that every time an insert is done into the table, from
    whatever source, the statement looks something like
    INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

  • How to Set default value for taxonomywebtagging control with terms and nested terms

    Hi,
    I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
    Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
    Any help would be greatly apprecited.
    Control code in aspx page:
    <td>
    <asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
    </td>
    <td>
    <Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    //Set the Business Unit Field
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GROUPName"];
    TermSet termSet = group.TermSets["TERMSETNAME"];
    Term term = termSet.Terms["TermA"];
    Guid termGuid = term.Id;
    term.SspId.Add(termStore.Id);
    term.TermSetId.Add(termSet.Id);
    term.AllowFillIn = true;
    term.AnchorId = countryGuid;
    term.IsMulti = true;
    Thank you.
    AA.

    Hi,
    According to your description, you want to set default value for TaxonomyWebTaggingControl.
    I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
    Here is the code snippet:
    TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GroupA"];
    TermSet termSet = group.TermSets["A"];
    Term term = termSet.Terms["A1"];
    TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
    TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
    TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
    TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
    TaxonomyWebTaggingControl1.AllowFillIn = true;
    TaxonomyWebTaggingControl1.IsAddTerms = true;
    TaxonomyWebTaggingControl1.IsMulti = false;
    TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
    Here is a detailed article for your reference:
    http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
    Feel free to Reply the test result.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

Maybe you are looking for