How to set default values in MIGO transaction

Hi,
        I am using ZXMBCU02 Userexit to change the storage location as some default value 'SDW2'.
code is as follows
   select single werks
                into v_werks
                from ekpo
                where ebeln = i_mseg-EBELN.
    if sy-subrc = 0.
      if v_werks = '2204'.
          i_mseg-LGORT = 'SDW2'.
          SET PARAMETER ID 'LAG' FIELD i_mseg-LGORT.
      endif.
    endif.
Actually while debugging, control is going to the above program but amd unable to change the values.
Am i using the correct userexit, or is there any problem with my code.
Thanks,
Ravi.

Hi,
Instead of using user exit, I may advice you to use the MB_MIGO_BADI, In this badi you can check the value of storage location,
and you can restrict user to change the storage location other than desired storage location,
May this will help you.
Regards
Rani

Similar Messages

How to set default value in OAMessageLovInputBean?

Hi,
How to set default value in OAMessageLovInputBean while loading the page?
I have tried the following code but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
Sunita

Hi Cristoph,
We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
Nay idea if we can achieve this....
Regards
Bhuwan Tiwari

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Badi for setting default values in the transaction in APO.

BADI NAME: SMOD_APOCF005 which is used for setting default values in the transaction.
I have implemented the BADI using the below code but that BADI is not triggering. Please can you provide any solution for resolving this.
As per my requirement I am trying to set default values for these three fields RRP_TYPE, WHATBOM, CONVH.
DATA: LS_MATLOC LIKE LINE OF IT_MATLOC.
LOOP AT IT_MATLOC INTO LS_MATLOC.
LS_MATLOC-RRP_TYPE = '4'.
LS_MATLOC-WHATBOM = '5'.
LS_MATLOC-CONVH = '999'.
MODIFY TABLE IT_MATLOC FROM LS_MATLOC TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.
DATA: LS_MATLOCX LIKE LINE OF IT_MATLOCX.
LOOP AT IT_MATLOCX INTO LS_MATLOCX.
LS_MATLOCX-RRP_TYPE = 'X'.
LS_MATLOCX-WHATBOM = 'X'.
LS_MATLOCX-CONVH = 'X'.
MODIFY TABLE IT_MATLOCX FROM LS_MATLOCX TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.

The BADI name: SMOD_APOCF005 .
T.code at APO : /sapapo/mat1
Once we enter in that T.Code with some Product and Location data.
There under PP/DS tab.
Under Planning Procedure there is a field PP Plng Procedure which I want to set as 4
And under Order Creation there is Plan Explosion which needs to be set as 5
And Under Horizons there is PP/DS Horizon which needs to be set as 999.
BADi is implemented and active.
And once the data is CIF from ECC to APO
These default values are not set in the T code in APO and the BADi is not triggering.

How to set default value to date type attribute.

Hi,
How to set default value to date type attribute.
E.g I want to set u201C01/01/1999u201D to date attributes.
First i want to set value and then i want to fetch the same & want to check equals.
please suggest solution.
Regards,
Smita

Hi,
In wdinit() method u can set the date
DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
Date today = Calendar.getInstance().getTime();
String reportDate = df.format(today);
wdContext.currentContextElement().setFromDate(reportDate);
Another way you have set the this formate like that
1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
2. Select the type as "date"
3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
4.Bind the context attribute to the type created now.
Hope this helps u.
Best Regards
Vijay K

How to set default value of a table using sequence number

Dear all,
Does any body know that how to set default value of a table
using sequence number.
But I don't want to use trigger to do that.
Please help!!!!
Eldon

Andrew is essentially correct. You can get around the trigger,
but not the sequence, if (and this may be a very big if) you can
guarantee that every time an insert is done into the table, from
whatever source, the statement looks something like
INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

Default value in MIGO transaction for PLANT specific

Hi Experts,
I am looking for default vaule in MIGO transaction.
Whenever goods receipt is entered for one particular PLANT ,i want vaule to be dafaulted in Quantity tab No.of container unit value to be PC for english and ST for german.
Is is possible to achiece by creating new role ? if then how ?
Note : It is for PLANT specific and for only one user.
Thanks

>
Dhina wrote:
> Is is possible to achiece by creating new role ? if then how ?
This is not possible using security. You will be able to do it via some form of customisation but you need to judge whether is it worth it.

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

How to set default value in ME21N

Hi all,
I want to set default value of PO item's price unit to 1000 and make it unchangeable, is it possible? If so, could you please tell me how to do that.
Thanks in advance!
Woody

Dear Woody,
1) if u want to make any field un-editable then make it Via SHD0
2) Plz find the below link for Demo SHD0, here we need to make the field as out put only
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Plz Provide the link to ur Abaper
Regards
kumar

How to set default values in matrix combo

hai everybody.
i want to set default values in a matrix combo box. how to do that
pls.......

Hi Priya,
Public Sub comboload1()
        Try
            ds = oform.DataSources.DBDataSources.Add("OUSR")
            oitem = oform.Items.Item("pm7")
            omatrix = oitem.Specific
            ocolumns = omatrix.Columns
           ocolumn = ocolumns.Item("V_2")
           ocombo = ocolumn.Cells.Item(r).Specific (r = row number)
            LoadEroToCombo1(ocombo)
        Catch ex As Exception
            oapp.MessageBox(ex.Message)
        End Try
    End Sub
load to combo function is below
    Public Sub LoadEroToCombo1(ByRef ocombo As SAPbouiCOM.ComboBox)
        Dim rset As SAPbobsCOM.Recordset
        Dim querystring As String
        Dim rcount As Long
        Dim rindex As Long
        Try
            rset = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            querystring = "SELECT T0.U_NAME FROM OUSR T0"
            rset.DoQuery(querystring)
            rcount = rset.RecordCount
            rset.MoveFirst()
            ocombo.ValidValues.Add("0", "Select")
            For rindex = 0 To rcount - 1
                ocombo.ValidValues.Add(rset.Fields.Item(0).Value, rindex)
                rset.MoveNext()
            Next rindex
            ocombo.Select("0")
            rset = Nothing
            System.GC.Collect()
        Catch ex As Exception
            oapp.MessageBox(ex.Message)
        End Try
    End Sub
try this code if it helps please reward points
Regards
Cool Ice
Edited by: Cool Ice on Jul 28, 2008 1:43 PM

How to set default values in MIGO transaction

Similar Messages

Maybe you are looking for