How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Similar Messages

How to maintain default values to the screen fields.

hi,
i m creating screen in se51.
when i press New button the screen is filled with default values
nrart = 'h' and proz1 = '100' .
how can i set default values.
plz give me a response

HI,
You can set default values on to screen fields using SET and GET PARAMETER command, You need to assign a PARAMETER ID for that screen field and then use SET PARAMETER before the screen is called or in the PBO of the screen, you can set default values direcly in PBO of the screen but then you have hard code those value or read the data from database.
You need to have a TABLES statement to create a strucutre that you used to create your screen fields, then when you set value to these strucutre fields these values will get tranported to the screen fields automatically.
Regards,
Sesh

URM How to set default value in the "New Check-in" - "Folder" field

Hello everyone,
I'm trying to find out how to set the default value for the "folder" field in a check-in profile created using the Configuration Manager. If I browse to the folder in the "Browse Content -> Folders" menu and check-in a file inside the folder, it will fill this field automatically. I need to replicate this behavior using the "New Check-in" drop-down menu and selecting a profile, in other words, associate a Folder with a check-in profile.
I know it was possible to do so in previous versions using the folders_g component, but I'm unable to figure out how to accomplish it with the new FrameworkFolders component.
Any help is greatly appreciated.
Thank you.

Hello,
It is working fine try this.
PARAMETERS :
y_p_list TYPE char32 AS LISTBOX VISIBLE LENGTH 22
                              MODIF ID rsg. .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR y_p_list.
MOVE: text-200 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-203 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-210 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-211 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-204 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-205 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-206 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-207 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-208 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'FIELD'
      dynpprog        = sy-repid
      stepl           = 1
      value           = ' '
      value_org       = 'S'
      display         = ' '
    TABLES
      value_tab       = y_i_listbox[]
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
REFRESH y_i_listbox.

How to set default value to the variable !!!

Experts,
I have created a variable ZDATE, which is in variable entry screen of the query. and this variable is mendatory .
Now, i want to put default value of this variable ( Which can be done from the Variable Properties screen , on the Default Values Tab )
But , thru there i can only put selected value. my requirement is to show system date - 1 ( Previous date )
how do i get that ?
Thanks

Hi,
You would need to write a variable exit under I_STEP = 1 to get the previous day populated on your variable screen.
Regards,
Murali.

How to set default values in the PO feilds

Hello,
Can please somone let me know how can I default a particular tax code "X" on a Purchase Order at the item level in the invoice tab..
Any help would be greatly appreciated....
Thanks

Dear ,
You can set it in the info record > Purchasing Organization data 1. In standard customizing,the default value for tax exist for LIV module in SPRO-Materials ManagementLogistics Invoice VerificationIncoming InvoiceMaintain Default Values for Tax Codes
Regards,
w1n

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How to set default value in OAMessageLovInputBean?

Hi,
How to set default value in OAMessageLovInputBean while loading the page?
I have tried the following code but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
Sunita

Hi Cristoph,
We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
Nay idea if we can achieve this....
Regards
Bhuwan Tiwari

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

How to set default value to date type attribute.

Hi,
How to set default value to date type attribute.
E.g I want to set u201C01/01/1999u201D to date attributes.
First i want to set value and then i want to fetch the same & want to check equals.
please suggest solution.
Regards,
Smita

Hi,
In wdinit() method u can set the date
DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
Date today = Calendar.getInstance().getTime();
String reportDate = df.format(today);
wdContext.currentContextElement().setFromDate(reportDate);
Another way you have set the this formate like that
1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
2. Select the type as "date"
3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
4.Bind the context attribute to the type created now.
Hope this helps u.
Best Regards
Vijay K

How to set default value of a table using sequence number

Dear all,
Does any body know that how to set default value of a table
using sequence number.
But I don't want to use trigger to do that.
Please help!!!!
Eldon

Andrew is essentially correct. You can get around the trigger,
but not the sequence, if (and this may be a very big if) you can
guarantee that every time an insert is done into the table, from
whatever source, the statement looks something like
INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

How to Set default value to dropdown list in oracle ADF

hi,
I need to set default value in the drop down list in oracle ADF.
If you take in HTML :
<select>
<option value="">Select Value </option>
<option value="saab">Saab</option>
<option value="mercedes">Mercedes</option>
<option value="audi">Audi</option>
</select>
Like this i need to set default value in drop down llist in oracle ADF.
Thanks and Regards,
M. Ramu.

Hi Ramu,
Please be more clear on ur post whts ur Jdev version and wht type of dropdown u r using model driven or static list..?????
Its hard to help u without proper info..
Just have a look into this before u post a thread...
https://forums.oracle.com/forums/ann.jspa?annID=56
Regards,
Suganth.G

Badi for setting default values in the transaction in APO.

BADI NAME: SMOD_APOCF005 which is used for setting default values in the transaction.
I have implemented the BADI using the below code but that BADI is not triggering. Please can you provide any solution for resolving this.
As per my requirement I am trying to set default values for these three fields RRP_TYPE, WHATBOM, CONVH.
DATA: LS_MATLOC LIKE LINE OF IT_MATLOC.
LOOP AT IT_MATLOC INTO LS_MATLOC.
LS_MATLOC-RRP_TYPE = '4'.
LS_MATLOC-WHATBOM = '5'.
LS_MATLOC-CONVH = '999'.
MODIFY TABLE IT_MATLOC FROM LS_MATLOC TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.
DATA: LS_MATLOCX LIKE LINE OF IT_MATLOCX.
LOOP AT IT_MATLOCX INTO LS_MATLOCX.
LS_MATLOCX-RRP_TYPE = 'X'.
LS_MATLOCX-WHATBOM = 'X'.
LS_MATLOCX-CONVH = 'X'.
MODIFY TABLE IT_MATLOCX FROM LS_MATLOCX TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.

The BADI name: SMOD_APOCF005 .
T.code at APO : /sapapo/mat1
Once we enter in that T.Code with some Product and Location data.
There under PP/DS tab.
Under Planning Procedure there is a field PP Plng Procedure which I want to set as 4
And under Order Creation there is Plan Explosion which needs to be set as 5
And Under Horizons there is PP/DS Horizon which needs to be set as 999.
BADi is implemented and active.
And once the data is CIF from ECC to APO
These default values are not set in the T code in APO and the BADi is not triggering.

Set default value to selection screen for report

Hi All,
   I've a report selection screen which has 3 fields from the report category: PNPPERNR, PNPSTAT1, PNPBTRTL. My logical database is PNPCE.
   How can I set the default value to the field PNPSTAT1? Means when I first display the selection screen, the value for this field will automatically display '3' in it.
   Hope someone can help me on this.
Thanks.

Hi All,
   Thanks for reply. But I think I should declare my question clearer.
   Actually it's not a parameter.
My problem is when using the logical database, if you define a TABLES: PERNR, then you can see the SAP standard report selection screen. So my selection screen has 3 standard fields which are PNPPERNR, PNPSTAT1, and PNPBTRTL.
   I need to set the default value '3' to field PNPSTAT1.
Thanks.

How to set default values on the screen painter parameters?

Similar Messages

Maybe you are looking for