How to set different default interactive reports for different user groups?

I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
Thanks

You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

Similar Messages

How to set the default web site for WGM users

Hi,
In Tiger server there was a place to input the URL of the default web page for all browsers when users logged into network home folders. This was really helpful and saved a bunch of bandwidth and class time. Is there any way to do this in Leopard server? If so, please point me in the right direction.
Thanks,
..Tom

Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
...Tom

How to use different default parameter value for different report subscriptions

In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
spp

Hi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How to set a default Billing type for a particular Delivery type

Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
Rajesh

There is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM

How to set a default colour & thickness for rectangle in preview?

How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .

Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How do I print a contact report for a select group?

How do I print a contact report for a select group?

You should be able to select the group instead of all contacts. Older article.
Contacts – Print Contact Information

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

How to set the default maximum size for java's heap?

Hi!
Im trying to set the default max size for the java heap - but not from the command line.
I would like to set it higher as default on my computer.. how can I do that?
thanks!

>
...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file).

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

How to set a default output device for FAX outputs

Hi Experts,
Business requires to set a default output device for fax outputs ( Medium as 2 Fax medium ).
as fas as print output ( medium as 1 print medium ) is considered we can maintain output device in condition record--> communication
I tried maintaining output device in VP01 for my condition type based on sales org but it did not worked.
Can you please suggest ways to achieve default output device for fax outputs.
Thanks,

Well, obvious solution would be to either update user profiles or change the output from 'process immediately' to 'process by a background job'. Then create a generic user ID with any fax number desired and use that user ID to process the output through the background job.
This is not really an SD question, so if this simple option doesn't work for you, I'd suggest to discuss other custom solution with your ABAP / Basis team.

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

Default dashboard page for each user group

How can I set for each user group (or for each user) which dashboard will be opened as the deefault after login?
Can I also set the default page in that dashboard?

Hi,
Under Settings->My account->Preferences->User can select his default dashboard.Is it ok?
If you dont want them to select that option,you need to redirect them...You can use that blog....
Create a table in db with two columns-User, Portalpath
In initialization blog give query to fetch Portalpath from db based on user login... Follow steps from blog...
Check this blog....http://bintelligencegroup.wordpress.com/2010/09/23/external-table-authentication/
Clear explanation for external table authentication....in the same way you cna do but take two columns user,portalpath and follow the steps in blog.
Regards,
Srikanth
Edited by: Srikanth Mandadi on Oct 7, 2010 1:44 AM

How to set a default value of " " for a VARCHAR2 in ER diagram?

Hi,
I am trying to set the default value of a VARCHAR2 attribute to " " (space) in an ER diagram. But it just thinks I don't want anything for the default value. If I specify CHR(32) will it work? or is there another way? Will I have to wait until I get into the server model to do this, if so how do I do it there?
thx
adam

Are you sure you want the default to be a space, not a NULL? VARCHAR2 fields want to trim spaces from the right, which makes them NULL if they started as all spaces. You can force them to accept spaces, but it is an unnatural condition. Even the VARCHAR2 columns that I use as surrogates for booleans I set as 'Y' for true and 'N' for false, or 'T' for true and 'F' for false. Occasionally, it will be 'X' for selected and NULL for not selected, but the NULLs tend to cause trouble so I avoid them.
Okay, let's assume that you have a good reason to default to a space. Use ' ', including the single quotes. When you transform to a Table Definition, change the Default Value Type for the column to a Database Function Call. You can't do that in the logical (Entity/Attribute) design, only in the physical (Table/Column). That will make sure that the Server generator will leave it the way you wrote it.

How to set different default interactive reports for different user groups?

Similar Messages

Maybe you are looking for