How to set DISPLAY for tomcat service inorder to run reports using rwrun.sh

Here is my problem..
I came to know that its not possible to invoke rwrun.sh without setting the DISPLAY environment variable from the servlet or any java program. But some one proposed me a solution that to set the DISPLAY variable for TOMCAT service from where my servlet invokes the shell script written for report generation using rwrun.sh. The user for tomcat service is wwwrun ..
Do i need to set this variable in the logon script for this user ..but I couldn't find the .profile file for that.
Is there any way to set this variable for tomcat service and get the report successfully.

i gave export DISPLAY=aatsv001.local:0.0 in $ORACLE_HOME/bin/reports.sh
but it gives me the following error when i invoke the report
Xlib: connection to "aatsv001.local:0.0" refused by server
Xlib: No protocol specified
REP-0069: Internal error
REP-3000: Internal error starting Oracle Toolkit.
I also tried giving localhost and also aatsv001 (without .local)
some one help me..

Similar Messages

How to set IIS for Applet making it can run at any IE client.

I made an applet with java. It works fine under JDK.
After that, I made a web page with the applet embedded in.
But it can only run on those client computers if the computers has installed JDK.
Could you tell me how to set IIS so that my applet can run on all the client computers no matter whether they have JDK installed or not?

It would have nothing to do with IIS. Your applet apparently requires a "newer" version of Java than what comes with the browser by default. So either make your applet comply with the lowest common denominator (no Swing classes, only AWT, for example), or require your clients to install the newer Java plugin.

Oracle Service Bus 10.3 - split join how to set header for invoked service

In Oracle Service Bus 10.3 how can I set the header for the service being invoked. We make parallel calls to 2 different business services. One of the invoked service requires header to be set and I am unable to figure out how it can be done. Below are snippet of the code and WSDL.
--- Login Operation start ---
<operation name="login">
<wsdlsoap:operation soapAction="blah"/>
<input name="loginRequest">
<wsdlsoap:body use="literal"/>
<wsdlsoap:header message="passport:loginHeader" part="hppwsHeaderElement" use="literal"/>
</input>
<output name="loginResponse">
<wsdlsoap:body use="literal"/>
</output>
<fault name="genericFaultException">
<wsdlsoap:fault name="genericFaultException" use="literal"/>
</fault>
</operation>
--- Login Operation end ---
--- hppwsHeader Element --
<complexType name="hppwsHeaderElement">
<sequence>
<element maxOccurs="1" minOccurs="0" name="version" type="tns1:version"/>
<element maxOccurs="1" minOccurs="0" name="tx-id" type="tns1:tx-id"/>
<element maxOccurs="1" minOccurs="1" name="systemLangCode" type="xsd:string"/>
</sequence>
</complexType>
--- LoginRequest Element ---
<xs:element name="loginRequestElement" type="s0:loginRequestType"/>
<xs:complexType name="loginRequestType">
<xs:sequence>
<xs:element name="userId" minOccurs="1" maxOccurs="1" type="xs:string"/>
<xs:element name="password" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
--- LoginResponse Element ---
<xs:element name="loginResponseElement" type="s0:loginResultType"/>
<xs:complexType name="loginResultType">
<xs:sequence>
<xs:element name="sessionToken" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
In Oracle Workshop for WebLogic when I create a split-join .flow file while adding the invoke service call to login operation I am prompted to create the loginRequest and loginResponse variables. I can assign the appropriate expression to loginRequest.loginRequestElement prior to making the invoke call but then the backend business call fails because "systemLangCode" is not defined and set. Actual fault is
<ns1:genericFault xmlns:ns1="http://hppcbl.globalops.company.com/webservice">
<systemLangCode>en</systemLangCode>
<fault>
<ruleNumber>589</ruleNumber>
<fieldName>systemLangCode</fieldName>
<code>field.empty</code>
<desc>System language code is required.</desc>
<ftype>2</ftype>
</fault>
</ns1:genericFault>
I would really appreciate if someone could guide me on how to resolve this
Regards,
-Nilay

There is this $header variable which you should populate before calling the BS. What is the type of BS? If it is WSDL BS , Any Soap BS then above solution will work. I assume that yours is WSDL based BS and setting $header should resolve this issue.
AnyXML and Messaging type BS services requires that you create proper pay load (setting $header will not work).
There is also other actions Set Transport Headers {outbound request/inbound response} which can be used to set transport related headers but not soap headers.
Manoj

How to set aspects for "storeContent" service operation

Hi, I'm using LiveCycle ES 8.2 and I want to set the aspects from a service parameter. So I switched the property "Aspects List" to "variable" and selected a service input parameter (with data type "list") as an input variable. In this list I want to specify all aspects, which has to be assigned to a document. Invoking this Webservice causes an "Not serializable"-Error. The question is how I have to specify the aspect list in the input parameter so that the "storeContent" service is understanding it correctly? Until now the input parameter in the Java client, which is invoking the web service is from type "ArrayList<String>", but this doesn't work. Thanks

Hi, I'm using LiveCycle ES 8.2 and I want to set the aspects from a service parameter. So I switched the property "Aspects List" to "variable" and selected a service input parameter (with data type "list") as an input variable. In this list I want to specify all aspects, which has to be assigned to a document. Invoking this Webservice causes an "Not serializable"-Error. The question is how I have to specify the aspect list in the input parameter so that the "storeContent" service is understanding it correctly? Until now the input parameter in the Java client, which is invoking the web service is from type "ArrayList<String>", but this doesn't work. Thanks

HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?

Dear Experts,
Can anybody explain how to set deletion flag to Service entry sheet created ?
Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet.
Thanks in Advance

Hi,
Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
regards,
Kannaiah Naidu

How to set display size of a Region or Dynamic Region?

Hi,experts,
In jdev 11.1.2.3,
I drag and drop a task-flow into a jsf page to create a Region,
and set display size for the region, source code as:
===================
<f:facet name="second">
<af:decorativeBox theme="medium" id="db1">
<f:facet name="center">
<af:panelGroupLayout layout="scroll" id="pgl1"
inlineStyle="width:1200px;height:700px;">
<af:region value="#{bindings.trainflow11.regionModel}" id="r1"
inlineStyle="width:1200px;height:700px;"/>
</af:panelGroupLayout>
</f:facet>
</af:decorativeBox>
</f:facet>
=================
But, the Region is only showed a small fraction area on the parent jsf page whenever during design or run time.
How to set display size of a Region or Dynamic Region?
Thanks!

Hi,
the decorative box is supposed to stretch components in the center facet, so at runtime the region should stretch. Can you try with a static region to see if this is an issue with dynamic regions?
Frank

How to set password for BPEL domain

Hi,
I am new to SOA.
I want to setup client-server environment for few developers.
I installed SOA 10.1.3.3 in the server machine.
And I created few domains in BPEL, one for each developer.
It didn't ask me to set the password while creation of the domain.
Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
Thanks!!!

Thanks for the prompt response.
What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
And I would like to know how to set the password for a BPEL domain too.
Message was edited by:
user644377

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

How to set value for radio button in sap crm survey suite

Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
Seshu

Hi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu

HOW TO: set anchoredObjectSettings for .palce() object?

Hi, I'm currently working on interesting script for GREP placing, and I'm wondering how I can set anchoredObjectSettings for .palce() object?
for(i=0; i < found.length; i++)
 foundElem = new File (myFolder + "/" + found[i].contents);
 found[i].place(foundElem); // Placing Ancored Object
 // HERE IS WHERE I NEED SOME HELP: how to set "anchoredObjectSettings" for just placed Ancored Object
 //anchoredObjectSettings.anchoredPosition = AnchorPosition.ABOVE_LINE;
 //anchoredObjectSettings.horizontalAlignment = HorizontalAlignment.TEXT_ALIGN;
Here you can download example files - script, InDesign file and images, that should be placed into InDesign file with script
Dropbox - GREP placing.zip
PS: I believe this script will be very useful, so if anybody have any ideas/suggestions, and want to help me with further development - this would be great!

Hi Kai, this script is still under development, here is updated version attached (now it can also place files/images by file name only, without extension):
#target indesign;
//#include "! Basic functions.jsx"
 GREP place files.
 This script will ask to select source folder with files to place,
 and then, with dialog box (or prompt) [this is not implemented yet, so I use static GREP value while developing]
 will ask to type GREP find expresion to search for text placeholder, that need to be replaced with file from source folder we just selected.
 TODO: Check how it works with other than image formats
 Also, this might be usefull to make anchored frame with column widh, and fit image proportionally
scriptName = decodeURI(File(app.activeScript).name.slice(0, -4)); // detect name of current script without expression
function Alert(msg) // function for native-looking alerts
 w = new Window ("dialog", scriptName, undefined, {closeButton: true});
 w.preferredSize = [300,75]; // window width and height
 w.margins = 15; // window margins
 w.orientation = "column";
 w.alignChildren = ["left", "top"];
 w.add("statictext", undefined, msg);
 close = w.add ("button", [0,0,96,20], "OK", {name: "Ok"});
 close.alignment = ["right", "bottom"];
 close.onClick = function(){exit();}
 w.show();
main();
function main()
 app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
 if(app.documents.length == 0)
 Alert("No documents are open. Please open a document and try again."); exit();
 else
 //> START OF doUndoWraper
 if (parseFloat(app.version) < 6) // "app.version < 6" if it's running under an earlier version than CS4, as earlier versions don't support "Undo" in scripts
 doUndoWrapper();
 else
 app.doScript(doUndoWrapper, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, scriptName);
 //< END OF doUnoWraper
function doUndoWrapper() // this is the wraper function UNDO everything script made by single undo
{// START OF doUndoWrapper
defaultGREPexpression = "(?i)^[a-z0-9 _-]+\\.\\w{2,4}$"; // Paragraph that starts with upper or lower case latin character, digits, spaces, hyphen or underscore, and ends with .extension
var myFilteredFiles;
var myExtensions = []; // initialize array
myExtensions.push(".jpg", ".jpeg", ".png", ".gif"); // raster images
myExtensions.push(".psd", ".tif", ".tiff", ".pdf"); // raster images (layered)
myExtensions.push(".ai", ".eps", ".svg", ".cdr"); // vector graphics
myExtensions.push(".mp3"); // audio files
myExtensions.push(".mp4"); // video files
myExtensions.push(".swf"); // flash files
myExtensions.push(".doc", ".docx", ".rtf", ".txt"); // text documents
myExtensions.push(".xls", ".xlsx"); // table documents
//Display the folder browser.
if(app.activeDocument.saved) // our document was saved before - we suggest to start search for source folder from were InDesign file saved
 var myFolder = Folder(app.activeDocument.filePath).selectDlg("Select the source folder with files for placing", "");
else // file was not saved before, so we don't know where to search > suggest to start from Desktop
 var myFolder = Folder.selectDialog("Select the source folder with files for placing", "");
if(myFolder) // if folder was selected
 //Get the path to the folder containing the files you want to place.
 var files = new Object(); // This will assoc array with FILE_NAME => FILE_EXTENSION
 if(File.fs == "Macintosh")
 myFilteredFiles = myMacOSFileFilter(myFolder);
 else
 myFilteredFiles = myWinOSFileFilter(myFolder);
 if(myFilteredFiles.length != 0) // success: we have found supported files to place
 for(i = 0; i < myFilteredFiles.length; i++)
 var filename = myFilteredFiles[i].fsName.toString().replace(/^.*[\\\/]/, ""); // now we get only file names with extenstions
 var file = [];
 file = filename.split("."); // separate file name from file extension
 files[file[0]] = file[1]; // write FILE_NAME => FILE_EXTENSION as assoc array
 else // error: There is no supported files for placing in specified folder
 Alert("ERROR: There is no supported files for placing in specified folder.");
 exit();
else // ERROR: we have not choose source folder
 Alert("Folder with source files was not specified"); exit();
//Windows version of the file filter.
function myWinOSFileFilter(myFolder)
var myFiles = new Array;
var myFilteredFiles = new Array;
for(myExtensionCounter = 0; myExtensionCounter < myExtensions.length; myExtensionCounter++)
 myExtension = myExtensions[myExtensionCounter];
 myFiles = myFolder.getFiles("*"+ myExtension);
if(myFiles.length != 0)
 for(var myFileCounter = 0; myFileCounter < myFiles.length; myFileCounter++)
myFilteredFiles.push(myFiles[myFileCounter]);
return myFilteredFiles;
function myMacOSFileFilter(myFolder)
var myFilteredFiles = myFolder.getFiles(myFileFilter);
return myFilteredFiles;
//Mac OS version of file filter
//Have to provide a separate version because not all Mac OS users use file extensions and/or file extensions are sometimes hidden by the Finder.
function myFileFilter(myFile)
 var myFileType = myFile.type;
 switch (myFileType)
 case "JPEG":
 case "EPSF":
 case "PICT":
 case "TIFF":
 case "8BPS":
 case "GIFf":
 case "PDF ":
 return true;
 break;
 default:
 for(var myCounter = 0; myCounter<myExtensions.length; myCounter++)
 var myExtension = myExtensions[myCounter];
 if(myFile.name.indexOf(myExtension)>-1)
 return true;
 break;
return false;
//> START OF GREP expression dialog
w = new Window ("dialog", scriptName+": specify expression", undefined, {closeButton: true});
w.preferredSize = [300,75]; // window width and height
w.margins = 15; // window margins
w.orientation = "column";
w.alignChildren = ["left", "top"];
panel = w.add("panel", undefined, "Find what: (GREP expression)");
if(app.findGrepPreferences.findWhat != "")
 grepExpression = app.findGrepPreferences.findWhat;
 clearFindWhat = false;
else
 grepExpression = defaultGREPexpression; // use default GREP expression
 //fgrepExpression = "\\[.+\\]"; // \\< means "begining of the world", and \\> means end of the world;
 clearFindWhat = true;
var grepExpression = panel.add ("edittext", [0,0,270,20], grepExpression);
grepExpression.active = true;
panel.add("statictext", undefined, "GREP expression no need for for double \\\\ escaping");
ok = w.add ("button", [0,0,96,20], "Continue", {name: "Ok"});
ok.alignment = ["right", "bottom"];
ok.onClick = function()
 findWhat = grepExpression.text;
 w.hide();
w.show();
//< END OF GREP expression dialog
if(typeof findWhat !== "undefined") // check we have not left GREP expression field empy
 app.findGrepPreferences.findWhat = findWhat; // our GREP that search for image placeholder text;
 found = app.activeDocument.findGrep();
 for(i=0; i < found.length; i++)
 if(found[i].contents.indexOf(".") > -1) // we wroking with file name with extension
 foundElem = new File (myFolder + "/" + found[i].contents);
 else // we work with file name only, so we need to add file extension manually
 found[i].contents = found[i].contents.replace(/[^a-z0-9 _-]/gi, ""); // remove all unwanted characters from file name: only letters, numbers, spcaces, minus and underscores allowed
 foundElem = new File (myFolder + "/" + found[i].contents + "." + files[found[i].contents]);
 try
 placedObj = found[i].place(foundElem)[0].parent; // THANKS TO: Jump_Over for help @ https://forums.adobe.com/message/6912489#6912489
 placedObj.anchoredObjectSettings.anchoredPosition = AnchorPosition.ABOVE_LINE;
 placedObj.anchoredObjectSettings.horizontalAlignment = HorizontalAlignment.TEXT_ALIGN;
 placedObj.frameFittingOptions.autoFit = true;
 placedObj.frameFittingOptions.fittingOnEmptyFrame = EmptyFrameFittingOptions.FILL_PROPORTIONALLY;
 placedObj.frameFittingOptions.fittingAlignment = AnchorPoint.CENTER_ANCHOR;
 catch(e)
 Alert(e);
 app.changeGrepPreferences.changeTo = "";
 app.activeDocument.changeGrep();
 if(clearFindWhat) // clearing only if typed GREP expression manually
 app.findGrepPreferences = app.changeGrepPreferences = null; // clear Find/Change preferences once we finished
else
 Alert("Find what GREP expression was not specified"); exit();
}// END OF doUndoWrapper
Top part with Windows/Mac filtering was copy-pasted from default InDeign script "ImageCatalog.jsx" as example and modified - I'm not sure if all this stuff is needed, I haven't test if it works the same without those filtering on both OS - if that's not needed - then thanks for tip!
PS: in your findWhat \l{3,4} will not catch .ai files
and what means .source at the end? is that doing necessary escaping, so with it it's posible to write \l instead of \\l

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set password for every application

Hi,
As a administrator how to set password for every weblication in sharepoint 2013.
Is there any way to set?
Thanks,

Who's password are you trying to set? Please provide more details.

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to set DISPLAY for tomcat service inorder to run reports using rwrun.sh

Similar Messages

Maybe you are looking for