How to set domain name to a site that was developed using netbeans

I developed a website using netbeans.I want to give some DNS like site1.com to it.Where can i set that ?
Thanks in advance

1) You post questions in the wrong forum. (As you title says this is a Swing question).
2) Not once in your last 10 postings have you ever bothered to reply to a posting to thank people for the help you have received.
I seriously doubt you well ever get answers in the future.

Similar Messages

Firefox gave me a warning about a site and I set an exception. The site that was warned against has asked me for a screenshot, but I can't find how to remove the exception in order to replicate the warning message. How do I remove the exception?

The site was JustCloud.com, and it wasn't every page that triggered the warning. I've looked through Options: Security, Advanced, etc., and can't find access to the stored exception in order to remove it. Below is the URL of one page that triggered it:

How did Firefox showed that warning?
Was the a pop-up on a sliding bar at the top of the browser page or a message on the web page?
Do you remember any content of that message?
Was it about a certificate (secure connection)?
Rename the file "permissions.sqlite" to permissions.sqlite.sav in the Firefox Profile Folder to remove all exceptions (cookies, images, pop-ups, software).
If renaming didn't help then you can undo and rename the file permissions.sqlite.sav to permissions.sqlite to get back the old exceptions.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"
The Firefox Firefox/4.0.1 version that you currently run is no longer supported with security updates.
*http://en.wikipedia.org/wiki/Vulnerability_(computing)
*http://www.mozilla.org/security/known-vulnerabilities/
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html

How do I remove music from iPhone 5 that was downloaded using Amazon Music Player?

I uploaded my music files to the Amazon Cloud Player. Then through the Amazon Cloud Player app, I downloaded songs directly to my iPhone so I could access them when offline. I removed the app when I wasn't using it anymore but now can't delete the song files. When I sync the phone with iTunes, the songs show up on iTunes but I can't play them or delete them. No files are showing up when I try to delete through the Usage area of settings.

YYou should see what Amazon clour player support site says oh how to remove sounds.

How to include a .lvlib in a build that was created using a custom .dll

I am trying to build an executable in LV2010 that uses a .lvlib that was created using a .dll from Keyence. I have added the .lvlib to the source files as "Always Included" and I have also added all of the .vi files of the library to "Always Included." I still get the error saying "Missing External Function" when running the program. The executable seems to open fine on the development computer but not on a secondary computer. Any ideas?
Solved!
Go to Solution.

...I assumed too quickly that the problem was resolved. By specifying the path I was actually able to open the executable after installing but none of the .dll functions worked. I noticed that when I specified a path on the diagram, the .dll was no longer included in the dependencies and was no longer included in the build. I guess this would explain why none of the functions were working. I copied the .dll over to the path specified on the diagram and it still did not function.
This brings me back to the original problem I was facing. I actually removed the .lvlib. I replaced all of the library vi references with the Call Library Function and deselected the "Specify path on diagram" Boolean. When I do this, the build includes the .dll in the dependencies list and it includes the .dll file in the destination folder of the install. However, when running the executable I get a list of errors that read, "Missing external function …” I have attached an image of this error. This is the same error that occurred when I was using the library, but I thought maybe the library was the cause of the problem, which is why I used the Call Library Function instead.
*I have tried adding the .dll to the support files and I receive the same error when trying to run the executable.
*I have tried adding the .dll to the support files and making it an “always include” in the installer properties under source files. This returns the same error.
I’m really not sure where to go from here. Any help is greatly appreciated!
Attachments:
Call Library Function.jpg ‏56 KB
Error.JPG ‏23 KB

Multiple domains names and web sites with only one SLS and one static IP

I tried to find a post on this topic but I still can't find what needs to be done.
SLS is configured for one domain with one web site and it's working well. We will call it domain1.com. Here is the config:
Static IP: 69.x.x.x
DNS setting under Server Admin:
hostname: server.domain1.com
Two DNS entries under domain1.com with:
www - alias - server.domain1.com
server - Machine - 10.0.1.x (fixe IP for server on LAN)
Web settings under Server Admin:
server.domain1.com - 10.0.1.x - Port 80
Domain1.com is managed with DynDNS Custom DNS Service with 1 record:
domain1.com - A-record - 69.x.x.x
I want to host a second domain (for a website) called domain2.com. It's also registred at DynDNS and I have custom DNS setting to configure.
What's need to be done to have both domains with seperate web site on SLS under DNS and Web settings (beside the fact that I will have 2 different folders with the website files in it). I understand that I will need a new entry in the DNS for the new domain (domain2.com) and also an entry in the Web Service pane. But what are the details.
Thanks.

When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
Am I way off?
All help gratefully received,
Jeff

How to change domain name in OD?

Hi, I can't remember what I did to my installation of Server 10.5.6, but now whenever I promote it to OD Standalone, it automatically use domain name A.com. For example, oc=a,oc=a,...
I want to change the domain name to B, and make OD to use the new name B.com.
How do I do it?

I'll second that it's probably a DNS issue, although it may also have to do with the server's configured hostname (which was entered when the server was first set up). Basically, the requirement is that a DNS lookup on the hostname should return the server's primary IP address, and a reverse DNS lookup on the primary IP address should return the server's configured hostname. If you want the server to be set up as B.com, you need to:
a) make sure its configured hostname is "B.com" (you can check it with the "hostname" command). If it isn't, use the "changeip" command to fix it. If your server's IP address was 1.2.3.4, the command would be "sudo changeip - 1.2.3.4 1.2.3.4 A.com B.com".
b) make sure the DNS forward and backward lookups work right. Use the command "host B.com" to check the forward lookup (it should answer with 1.2.3.4, or whatever the server's IP address actually is), then "host 1.2.3.4" to check the reverse lookup (it should return B.com). If any of this doesn't work, find out who's supplying your DNS service and bug them to fix it.

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

How to set dynamic name of the mail attachment according to source file ?

Hi,gurus:
Our scenario is like below:
Sending files from an FTP server to another FTP server without using the integraiton repositary,and the file name is not changed .Now, we want to also send the file to some with by mail adapter.The scenario now works by using two business services in receiver determination.But the name of the attachment is "untitled.xml".We know how to set the file name staticly,but how to set the name dynamicly according to the source file name ?
I have checked miachel's blog "XI: Dynamic name in the mail attachment - pseudo "variable substitution"(/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution),but how can I get the source file name?
And another question:Must we restart the adapter or j2ee engine to make the user defined module work?

Hi,
>>>but how can I get the source file name?
form dynamicconfiguration (ASMA)
>>>And another question:Must we restart the adapter or j2ee engine to make the user defined module work?
no need for a restart
Regards,
Michal Krawczyk

How to set group name as default value in People Picker in Infopath 2010

How to set group name (shareoint Groupname) as default value in People Picker in Infopath 2010

Under the Developer tab in Infopath you can manage Loading Events, unfortunetly i dont have Visual Studio on this PC so i cant laborate, but i believe it's rather simple to figure out.
Edit: Found a easier way, through Data > Default Values.

How to change domain name on Windows 2003 running Exchange 2007

Hi all,
I have a windows 2003 server running Exchange 2007. I am wanting to rename the domain, however when I search the web for the process to perform a rename of the domain I see "The domain rename operation is not supported in Microsoft Exchange Server 2007".
How can a domain name be changed? http://technet.microsoft.com/en-us/library/cc781575%28v=ws.10%29.aspx
The server runs active directory, dns, dhcp, and Exchange 2007.
This change is being inspired by the change with SSL certs where internal addresses like .local will no longer be supported in the third party certificate registrars. Recently we renewed our cert and did not include the .local URL. Now the internal
systems are getting warnings about the cert. I tried generating an internal self signed cert but it seems only one cert can be valid with exchange 2007 running on windows 2003. Thus the internal cert replaced the external cert and allowed
the internal systems to run without complaining about the cert but the external access was causing warnings. I reversed back to the third party cert. This cert has company.com and mail.company.com and autodiscovery. I believe if I rename
the server to server2.company.com the autodiscovery will allow the server2 to be mapped to company.com and the cert will be valid for internal clients.
Do I have this correct? Are there errors with what I have found so far?
Any suggestions about how to solve this issue short of getting a new server? How can I rename the domain?

Hi,
As you mentioned, the domain rename is not supported in Microsoft Exchange Server 2007.
About your question with certificate, we can change URLs to xxx.domain.com. More details about this workaround, please refer to:
https://support.microsoft.com/kb/940726?wa=wsignin1.0
Note: please make sure the same name with certificate.
Additional, Microsoft do not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
Best regards,
Allen Wang

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How do I get my iphone to remember a different password in safari when I change a password for a secure site that was already changed

How do I get my iphone to remember a different password in safari when I change a password for a secure site that was already changed

Click here and use Apple's iForgot service; if it doesn't work, contact Apple.
(120917)

Does anyone know how to set up a macbook pro so that other computers can join me and use my internet connection?

Does anyone know how to set up a macbook pro so that other computers can join me and use my internet connection?

Have you set up any security on the Mac Connection Sharing?
Sorry but I don't use that so I'm not familiar with the settings.
But if you haven't setup and security the iPhone might not mind but I know most Windows computers do not like to connect to Open WiFi. and make sure it is WPA or WPA2.
Then again it may be a setting in the connection sharing like some type of MAC filtering or it may simply be that Mac OS X connection sharing only allows one connection at a time. Try disconnecting your phone and then connect the PC.
As to Linc's response about Windows.
Windows basically does care about connecting to open, unsecured, WiFi. But it will normally pop up a windows asking "Are myou sure you want to connect to this open network". And a simple click on yes will get you connected and an IP address.
So this is clearly a Mac OS X problem.

How to set domain name to a site that was developed using netbeans

Similar Messages

Maybe you are looking for