How to set "Facing Pages" in Pages 5/1

I can't seem to set my page format to Facing Pages. I'm using Pages 5.1 I don't see the box shown in the manual to check for facing pages.
Thanks, Ron

Apple has simplified this for you.
You can't.
Peter
btw How are you running Pages 5 in OS 9.2x?

Similar Messages

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

How to set the page size

Hi,
How to set the page size of a B tree node in berkeley db java edition?
thanks.

The two systems have different performance characteristics. If you are concerned with the performance characteristics, then the best way to tell is to benchmark them.
By the way, both BDB and BDB JE are B-trees.

How to set default page in DLN among folders structure

Hi All,
We have the navigation structure as follows.
In Top Level Navigation we have a Role called " Role1"
In Second Level Navigation we have a Workset called "Workset1"
In Detailed Navigation we have a folders as below :
Folder1
    Folder2
          Page1
          Page2
          Page3
    Folder3
         Page4
         Page5
         Page6
Now our requirement is when user clicks on Role1 then in the Detailed Navigation (DLN) , Page1 should set by default and content in that page has to be displayed in the content Area.
Currently it is happening like, when user clicks on Role1 then in the Detailed Navigation(DLN), Folder1 is selecting by default , then user has to select manually the page1 then that page1 is content is displaying in the content area.
Could you please get back to me what are the properties has to be changed at page level or folder level if any, for achieving the requirement as page1 should set by default when user clicks on Role1 ( from the First Level Navigation).??
I tried the property of "Default entry for folder" for page1 as "Yes", Still it is setting the page1 as deafult in the DLN on click of Role1. Please let me know if any other properties are required to change?
Note : Currently we are using Light framework page fucntionality instead of Default framework page.
Thanks in advance, it would be great help to us if get back to us.
Regards,
PortalUser100
Edited by: PortalUser100 on Feb 24, 2011 6:53 PM
Edited by: PortalUser100 on Feb 24, 2011 6:54 PM
Edited by: PortalUser100 on Feb 24, 2011 6:57 PM

Hi Mahesh,
Thanks for your reply.
Currently we are using Light framework page not Default Framework Page, Inside we have Light detailed Navigation, inside i had check for the property of "Clicking Folder Name Launches First Node", but it was not there for Light detailed Navigation.And this property is there as you said for detailed navigation inside the desktop inner page.
Could you please guide whether out requirement is possible or not with light framework page->light detailed navigation?
The following is our requirement
How to set a Page as Default which is inside the Folder Structure on DLN (Detailed Level Navigation).?
When user clicks on Role , then we need to set the Page as default to be loading in the detailed Navigation then the content of Page will be automatically displayed in the content area.?
The following is the Structure of our requirement, then please let me know how to set Page as default when we click on Role 1, as mentioned in the below structure. Currently when click on Role1, then Folder1 in the DLN is selecting by default then user has to click on Page manually then content of page will be displayed in the content area.
Role1 (First Level Navigation)
     Workset1(Second Level Navigation)
         Folder1(Deailed Navigation content)
              Folder2
                    Page (Google Page, for example)
I tried the property of Page as "Default Entry for Folder" as "Yes", even though still the page is not setting by default on click of Role1. let me know if any other changes/properties/options are there to get the solution for this.
If any one helps on this then it would be great help to us.
Currently we are using Light Framework Page. Not Default Framework Page.
Thanks in advance.
Regards,
PortalUser100

2 Question How to set the page size and full screen

I am looking to find out how to set the page to be 1024 by
768 static and also how to force a browser window to go to full
screen. Thanks

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How to Set a page as home page in Oracle portal 10g

Hi,
I have one doubt.
How to set a page (Not Page group) as home page in Oracle portal 10g?
whether it should be a HTML Portlet or some other?
Thanks & Regards
Suthan.Sathya

Hi,
Welcome to SDN
By defining the Sort Sequence of Navigation Nodes, you can do this, check the links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/53/89503ede925441e10000000a114084/frameset.htm
If you need more help, just ping back.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

How to set a page template for news detailed view?

Is there a way to set a page template for the detailed view of the news module?
I have a page template setup and added the {module_announcement,,,,,} to the page. When the news item is clicked it always opens the default template - is this how it is designed to work or is there a way I can specify it to use a different page template?
Dave.

Hey Dave, See the image below:

How to set a page item to either of two sources?

Hello Folks,
I would like some advice with the following:
On P1 there is a text field, say p1_text. The users enters a value into p1_text. This is validated.
If the p1_text value validates OK, and the next button is pressed, there is a branch to page 2, which has a sql query page item named p2_dest which should use :p1_text in a where clause.
If the p1_text value does not validate OK, the user is then presented with a Select List named p1_select (p1_text is now hidden). When the next button is pressed, there is a branch to page 2, and the sql query page item, p2_dest should now use :p1_select in a where clause (instead of :p1_text).
I have the validation and presentation of either p1_text or p1_select working OK, but would really appreciate suggestions on how to set the one item on page 2 with either of the page 1 items when the branching occurs.
Thanks
KIM

I used pl/sql in a page process on P2 to implement this logic to set a P2 item. I removed the setting of items from the calling page branch process.
Cheers
KIM

How to view facing pages in new Pages?

I have a number of Pages files which were converted to the new format (v5.0.1) under OSX10.9.1, but which now don't appear to display with the pages facing each other. Only single pages are displayed. Probably a dumb question, but how do I change the View so that I can look at pages 1 & 2 on the screen next to each other?

Apple has simplified this for you.
You can't.
Peter
btw How are you running Pages 5 in OS 9.2x?

How to set Single-Page layout mode in C#

I have searched through all of the API documents, without success in how to correctly set the PDLayoutMode to SinglePage.
I am using Acrobat Standard 7.0.9 with the 7.0.5 SDK and Visual Studio C# Express 2005 edition. I have quite successfully interfaced with Acrobat using C#, and have been happily using it for the past 8 months. But, now I need to extend my app to programmatically set the page layout mode. I don't find complete enough documentation to help me get the job done.
One hint I stumbled upon, was to use the AVAppSetPreferences(), but the docs are wimpy on the correct values for the method's two parameters.
Anyone have any experience with AxAcroPDFLib, or other OLE methods to set the page layout mode to other than default?
Regards,
Dale.

I would like to propose this as a new IDEA in this forum but again: NOT POSSIBLE. I am not privileged.

How to set which page to open on

Hi,
Can someone tell me how to set the property (which one?) so the pdf document will open on a certain page?
I just cannot figure out how to use the reference. There is a GoTo, which maybe is the one i'm looking for(?), but how do i call/set it?
(no, it is not pageNum in the doc object)
Thanks!

Each document contains all pages. So essentially, there are a lot of copies of the same file and has the same content (yes, it is stupid).
Anyway, i have found a way to do this. I open each document (which i thought would already be open so i could use "this"), set the property, save and lastly close it. It works, but it aint fast. So if someone ever finds a way to do this faster, that would be really nice. :-)
Here is the code:
/* Set Initial Page View */
function trimNumber(s) { while (s.substr(0,1) == '0' && s.length>1) { s = s.substr(1,9999); } return s; }
var re = /.*\/|\.pdf$/ig;
var filename = this.path.replace(re,"");
console.println(filename);
var mypage = filename.substring(15-3);
var mDoc = app.openDoc(this.path);
var goToPageScript = "this.pageNum = \"" + (trimNumber(mypage)-1) + "\";";
mDoc.addScript("GoToPage", goToPageScript);
mDoc.saveAs(this.path);
mDoc.closeDoc();
Example file name: tqr02_10a02_003.pdf
I really appreciate the help you gave me! I don't think i would ever get this to work otherwise. And now it saves me time opening 300+ document manually to set the initial page view, and do this every month!
Thanks!

How to set the page size and the margins programatically

Hello,
I am working with crystal report XI Release2 and asp.net.
One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set the paper size as A3.(Via Crysta report ->File->Page set up)
But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
This is a kind of usability issue also.
Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
Please let me know if you require more information regarding this issue.
Thanks in advance.
smitha.

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How to set Jspx page width and hight programatically ?

Hi All ;
i need to browse a jspx page has Different width & hight sizes ;
Please Can SomeOne tell me ow to set Jspx page width and hight programatically ?
Regards;

In that case you need to use JavaScript.
Resizing the browser window in JavaScript is done by using window.resizeTo(400, 400);
I
Thanassis

How to disable facing pages for horizontal only fixed layout?

Hi,
Is there any way to turn off facing pages in iBooks Author for ‘horizontal only’ fixed layout?
Many thanks.

You can disable portrait and then insert a graphic image large enough to serve as your frame or background. To that add text, shapes and other images managing layers with Arrange. Ta Da! Fixed Layout.

Help on how to Set a page length and width.

Hi guys I'm kind a new to java JDBC and Jasper.
I'm currently creating my senior project, developing a POS system using Java JDBC, MySql and JasperReport.
I'm now on the finally stage of my project polishing stage.
Now here is my problem.
My adviser wanted my to print sale Invoice using and ordinary Printer let say Espon LX 300 which is available on our Cmpter Lab. He want me to print Sale Invoice using continues paper and try to simulate an actual thing. But I don't know on how to set up a custom paper size in Java or trying to select printer from your system or in your network.
here is the sample of the code:
void PrintInvoice(String databaseName,String userName,String password,String reportFile,String Invoice_Reprint)
        HashMap hm = new HashMap();
        hm.put("REPORT_DATE", saledate_tbox.getText());
        hm.put("REPORT_VAT", vat_tbox.getText());
        hm.put("REPORT_SUBTOTAL", subtotal_tbox.getText());
        hm.put("REPORT_TOTALPAYMENT", total_tbox.getText());
        hm.put("REPORT_CASH", cash_tbox.getText());
        hm.put("REPORT_CHANGE", change_tbox.getText());
        hm.put("REPORT_POS",POS);
        hm.put("REPRINT", "REPRINT");
        Connection connection = null;
        ResultSet resultSet = null;
        Statement statement = null;
        try{
        Class.forName(JDBC_DRIVER);
        String query1 = "select invoice.idinvoice as 'Invoice No'" +
                ",CONCAT(customer.firstname,' ',customer.lastname) as 'Customer'" +
                ",invoice.date as 'Date-Time'" +
                ",item.description as 'Description'" +
                ",sum(invoice_items.quantity) as 'Quantity'" +
                ",Format(item.regular_price,2) as 'Unit Price'" +
                ",Concat((invoice_items.discount*100),'%') as 'Whl Disc'" +
                ",Format(invoice_items.price,2) as 'Price'" +
                ",employee.username as 'Employee'" +
                ",Format(invoice.totaltax,2) as 'Vat'" +
                ",Format(invoice.total,2) as 'Total'" +
                ",Format(invoice.cash,2) as 'Cash'" +
                ",Format((invoice.total-invoice.totaltax),2) as 'Subtotal'" +
                ",Format((invoice.cash-invoice.total),2) as 'Change'" +
                " from invoice,item, invoice_items,customer,employee " +
                "where invoice.IDINVOICE = invoice_items.IDINVOICE " +
                "AND invoice_items.UPC_CODE = item.UPC_CODE " +
                "and invoice.idcustomer = customer.customerid " +
                "and invoice.idemployee = employee.idemployee " +
                "AND invoice.idinvoice = (select idinvoice from invoice " +
                "where idemployee = (select idemployee from employee where username = '"+soldby_tbox.getText()+"') " +
                "AND idinvoice = '"+Invoice_Reprint+"' ) GROUP BY item.DESCRIPTION";
        connection = (Connection) DriverManager.getConnection(databaseName,userName,password);
        statement = (Statement) connection.createStatement();
        resultSet = statement.executeQuery(query1);
        JasperDesign jasperDesign = JRXmlLoader.load(reportFile);
        JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
        JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport, hm, new   JRResultSetDataSource(resultSet));
        JasperExportManager.exportReportToPdfFile(jasperPrint, PDFEXPORT);
        JasperViewer.viewReport(jasperPrint);
        JasperPrintManager.printReport(jasperPrint, false);
      }catch(Exception ex) {
         String connectMsg = "Could not create the report " + ex.getMessage() + " " + ex.getLocalizedMessage();
         System.out.println(connectMsg);
      finally{
        try
              statement.close();
              connection.close();
           } // end try
           catch ( Exception exception )
              exception.printStackTrace();
           } // end catch
    }My code print the report on the default printer and default printer setting.
I hope someone out there can help me thx alot. by the way I uses Ubuntu as my OS.
The theme of my Senior Project: POS System Using Open Source.
Hey can someone suggest a project tag line or a better theme cause I believe in the ideals of Open Source,
Thx

Try to define ENTER this way & try
class cl_abap_char_utilities definition load.
DATA : BEGIN OF enter,
x type c value cl_abap_char_utilities=>cr_lf,
END OF enter.
PS : I am not 100% sure about this.
a®

How to set "Facing Pages" in Pages 5/1

Similar Messages

Maybe you are looking for