How to set field "vendor" as optional for movement type 221

Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
Any help will be highly appreciated.
Best regards!

Let me understand ,
u want to reserve stock with MB21 with optional for vendor code  or name .
then against the reservation u was t to issue to cost centre or production with 201 rt .
If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
possible check is Movement type - screen in omjj
GL account variant settings
MB1a setting
last option - create a screen variant with SHDO tode and activate it .
all will be at client level so please

Similar Messages

  • Account assignment for movement type 221

    Hi,
    Instead of using account suggested by GBB-VBR for movement type 221 we want to use account entered by user in transaction as an offset to inventory account.
    However SAP keeps on hitting account determined automatically (from GBB-VBR) and ignores account entered by user in transaction. In fact account entered by user in transaction is getting replaced by GBB--VBR and is also not available in any table (MSEG etc)
    I have already checked - checkbox "Check account assignment" that states preference to user entered account in transaction, in movement type -- account grouping config but for no use.
    Please help
    Thanks,
    Ashutosh
    Edited by: Ashutosh_x on Apr 6, 2010 7:22 PM
    Edited by: Ashutosh_x on Apr 6, 2010 7:23 PM
    Edited by: Ashutosh_x on Apr 6, 2010 7:25 PM

    In OBYC for Transaction GBB,  instead of BSX,  maintain BSA, VAX & VAY for each Valuation Class of material and its respective G/L Account.
    For example, if you are trying for a FERT material, then the entries should be
    0001::::BSA:::::7920::::::4XXX30
    0001:::VAX:::::7920:::::::5XXX30
    0001:::VAY:::::7920:::::::6XXX30
    Also check in OMJJ whether you have the settings as follows:-
    MvT::S::Val.Upd:::Qty.upd:::Mvt::Cns:::Val.stng:::Cn:::TEKey:::Acc mod:::Check acct.
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::2:::::GBB:::::::BSA::::::::::::::::X
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::3:::::PRD::::::::PRA:::::::::
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::2::::GBB:::::::BSA:::::::::::::::::X
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::3:::::PRD:::::::PRA:::::::::
    Check whether your settings are similar to above.
    thanks
    G. Lakshmipathi

  • How to set receiving batch mandatory in MIGO-mov type 303

    Hi gurus,
    We want to set receiving batch mandatory in MIGO-mov type 303.
    We already made this field (UMCHA) as Required in OMJJ under Field selection-Enjoy and Field selection (from 201)/Batch search procedure, but when do transaction, the field still not even appear. Can you help to know how to do that?
    Many thanks in advance

    Hello HongNguyen ,
    Please try the following customzing path in your system if you haven't already:
    - Transaction SPRO
       - IMG
         - Materials Management
          -  Inventory Management and Physical Inventory
            - Settings for Enjoy Transactios
               - Settings for Goods Movements (MIGO)
                  -   Field Selection per Mvt Type
    Please check your settings for Movement Type 303 and see if they are set to "Mandatory".
    I hope this information has been helpful.
    Best Regards,
    Frank

  • How to set the parameter selection *optional* for each subreport?

    Hi,
    I am using Crystal Reprots 11.
    I create 10 subreports, and each subreport contains a Parameters Field.
    The 10 subreports are put in 10 footer sections in increasing order, i.e. subreport1, subreport2, subreport3, ..., subreport10.
    When I use "Print Preview" to take a look at the whole report, CR prompts a "Edit Values" window for selecting parameter values for all 10 subreports.
    For example, if I only select parameter values for subreport1 and click "OK", 9 error messages on the "Edit Values" window come out above the selection list box of every other subreports (i.e. subreport2 ~ subreport10) showing that: 'The value is not valid'.
    Sometimes, I just want to review some specific subreports but not all.
    How should I do to set the parameter selection optional (not mandatory) for each subreport?
    Thank you in adavance.
    Edited by: Holdup on Feb 17, 2012 3:44 PM

    Hi,
    Here's how you can make the prompts optional (Assuming you're using CR 2008 or higher):
    1) Go into each subreport
    2) You should see the parameter in the Field Explorer. Right-click the name and select Edit > Look for an option called 'Optional Prompt'. Set it to true
    3) If you have a record selection in the subreport, then you need to modify the selection formula to something like this:
    if not(hasvalue({?Parameter_Name})) then True else = {?Parameter_Name}
    Hope this helps!
    -Abhilash

  • Purchase order field optional for Movement type

    Hi SAP friends ,
    Please let me know the config path to make the purchase order field as optional for particular mvt types that are used in MIGO transaction to receive the overage stock or reversal of overage stock
    Regards,
    JR.

    Hi John,
    If your posting a 101 movement against a purchase order then there is probably no way of making the PO optional, as this is a designed process
    I guess I need to understand the process in more detail
    In the Interim please look at the following customising settings
    Materials management > Inventory management > Inventory management and PI > Field selection for for goods movement
    Materials management > Inventory management > Inventory management and PI > settings for enjoy transactions > fields for goods movements
    Regards
    Steve

  • Default GL(123456) for movement type 221

    Hi Frds,
    We have the requirement to put the default perticular gl (12345678) when the user is using 221 movement type.Is it possible throuth configuration wise? Anyone can assist on this requirement.
    Advance thanks to your help.
    Regards,
    Nivas.

    Hi Nivas
                     Try the following steps to create a new G/L for the particular movement type. Take help from the FI person if possible.
                 1. Create a customized movement type (copy of 221) in T.Code, OMJJ.
                 2. Create a new valuation modifier (copy of VBR, say ZBR) in Account Grouping option
                 3. Do Account Determination in T.Code, OBYC (GBB-ZBR) for the new valuation modifier
                 4. Assign a new G/L (123456) for it.
                 5. Now try posting the material document.
    Regards,
    Rajesh.

  • Manual Reservation for Movement type 261

    Dear Friends,
    I want to create a manual reservation (MB21) for production order i.e. movement type 261. But system is not allowing and giving error message order category 10 (prodn order) not allowed for manual reservation.
    Can some one help to know how the setting which allows manual reservation for MVt type 261
    Thx
    Rishi

    Hi,
    After my long analyzation, I came know that, this is SAP standard setting.We cann't make any changes in order category 10. As per SAP standard procedure , the below order categories do not allow manual reservation.
    10 PP production order
    20 network
    30 maintenance order
    40 batch order (process manufacturing)
    50 inspection lot
    So please make goods issue through MB1A , if you want tracking this issue seperatly please put your production order number in text filed.
    I hope the above information is useful for you.
    Please reward points if my information useful.
    Best Regards,
    Nagapandian.

  • Destination plant, description, material are editable for movement type 313

    Hello
    We are using movement type 313 for the transfer posting between storage location. We use MIGO for the same.
    Ideally for the movement type 313, the destination plant and material should not be visible. We enter the material, batch,plant and storage locaiton in "From" side and enter only the storage location in "To" side of the MIGO screen. But now suddently after the EHP4 upgrade, we could able to enter the plant and materil in the "To" side also.
    I checked the Field selections in OMJJ for movement type 313 and found that plant and material fields are suppressed.
    Do you have any clue on why suddenly i am facing this problem and what could be possible solution.
    Thanks
    Venkat.

    Sounds like you're just dumping your spec here. What have you tried exactly to solve this yourself?
    Thomas

  • Re:- How to see customer/vendor open items for profit center wise

    any one help me regarding : How to see customer/vendor open items for profit center wise. That is possiable or not please suggest to me. I am using 4.6c version .

    Run the report from Tcode FBL1N for vendor open item and from FBL5N fron Customer open items.
    When you get the report, click on Change Layout icon ( or press Control + F8 from keyboard), search Profit Center fron the Table of Hidden fields on the right hand side. Move that field to the Left hand side table. Click ok, now you should be able to see the Profit Center column in your report.
    You can save this layout by clicking on the Save Layout icon ( or press Control + F12 from keyboard)
    Next time you can choose the saved layout by clicking on the Select Layout icon ( or press Control + F9 from keyboard)
    Regards
    Dharmveer

  • How to set field type choice using csom (c#)

    I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
    I have found code for multiple choice but it doesn't seem to work for single choice.

    Hi,
    The following code snippet for your reference:
    newListItem["ChoiceFieldName"] = "ChoiceValue";
    newListItem.Update();
    clientContext.Load(newListItem);
    clientContext.ExecuteQuery();
    If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
    More information is here:
    http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to set field alignment in a table in jdev 11.1.2.3?

    hi,
    How to set field alignment in a table in jdev 11.1.2.3?
    eg: to diplay a number field in a table as right aligned.
    I have tried to set field(amount) VO UI Hint Format Type:Number; Format: 0000.00
    and jspx as flowing, but it doesnot work.
    Thanks.
    bao
    <af:column sortProperty="#{bindings.VO1.hints.Amount.name}"
    sortable="true"
    headerText="#{bindings.VO1.hints.Amount.label}"
    id="c44" width="60"
    align="center">
    <af:inputText value="#{row.bindings.Amount.inputValue}"
    label="#{bindings.VO1.hints.Amount.label}"
    required="#{bindings.VO1.hints.Amount.mandatory}"
    columns="#{bindings.VO1.hints.Amount.displayWidth}"
    maximumLength="#{bindings.VO1.hints.Amount.precision}"
    shortDesc="#{bindings.VO1.hints.Amount.tooltip}"
    id="it58"
    secret="false"
    inlineStyle="text-decoration:overline;">
    <f:validator binding="#{row.bindings.Amount.validator}"/>
    </af:inputText>
    </af:column>

    Works for me:
            <af:column sortProperty="#{bindings.EmployeesView1.hints.Salary.name}" sortable="false"
                       headerText="#{bindings.EmployeesView1.hints.Salary.label}" id="c7" align="right">
              <af:inputText value="#{row.bindings.Salary.inputValue}" label="#{bindings.EmployeesView1.hints.Salary.label}"
                            required="#{bindings.EmployeesView1.hints.Salary.mandatory}"
                            columns="#{bindings.EmployeesView1.hints.Salary.displayWidth}"
                            maximumLength="#{bindings.EmployeesView1.hints.Salary.precision}"
                            shortDesc="#{bindings.EmployeesView1.hints.Salary.tooltip}" id="it6">
                <f:validator binding="#{row.bindings.Salary.validator}"/>
              </af:inputText>
            </af:column>JDeveloper 11.1.2.3
    Salary is shown right-aligned.
    What happens if you get rid of your inlineStyle on the af:inputText

  • How to set the JVM Startup Options?

    Hi,
    I want to know how to set the JVM Startup Options...
    The idea is, I want to test how the remote clients can access an EJB that is running on a different machine... Remote client here means, I have a java client application that runs on one machine and that contacts an EJB thats running on a different machine... I posted this question in J2EE forum and I got this reply...
    If you need to access EJB components that are residing in a remote system other than the system where the application client is being developed, set the values for the Java Virtual Machine startup options:
    jvmarg value = "-Dorg.omg.CORBA.ORBInitialHost=${ORBhost}"
    jvmarg value = "-Dorg.omg.CORBA.ORBInitialPort=${ORBport}"
    Now how to set the JVM Startup Options? I know my server ORBHost Name and the ORBPort..
    Anybody to help !!!
    Thanks in advance,
    Karthik

    java -Dorg.omg.CORBA.ORBInitialHost=${ORBhost} -Dorg.omg.CORBA.ORBInitialPort=${ORBport} <the main class>
    That should do it..

  • How to set field to blank if the data is # or unassigned

    hi experts,
    how to set field to blank if the data is # or unassigned?
    thx

    Hi
    add the following macro to your workbook (template workbook):
    Sub SAPBexonrefresh(qstring As String, resultArea As Range)
        For Each c In resultArea
            If LCase(c.Value) = "not assigned" Then c.Value = ""
           Next
    End Sub

  • How to set field value in workflow SPD2013?

    Hi All,
    how to set field value in workflow SPD2013? Actually using Infopath, i need to update a field value through workflow.(Little differnt from SPD2010). How to do this?

    As Amit says, some elaboration here would be good.  You can use InfoPath as a form for either a list or a library and then set it to trigger a workflow upon item creation.  The workflow will consist a number of actions, one of which is the Update
    Field Item.
    More information on the available steps can be seen here.
    http://msdn.microsoft.com/en-us/library/office/jj164026.aspx
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

    How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

    Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
    To change the card, go to your account settings and change the information to your new card, and hit save.

Maybe you are looking for