How to set firefox to no proxy using a script on OS X 10.8.5

I would like to push out a script to set FireFox to No Proxy.

Please continue in [https://support.mozilla.org/en-US/questions/1016067] Locking duplicate

Similar Messages

How to set value of application item using Java script.

I have created a textbox on page 0, on chnage of textbox i want to set the value of application item.
How to write the code to set & get value of application item.
Thanks,
-Amit

Hello Amit
This would be a great place to start...
JavaScript
Alternatively, APEX 4.0 will make this sort of task declarative.
Kind regards
Simon Gadd

Set maximum server memory by using sql scripts

Dear all
How to set maximum server memory by using sql scripts in sql server 2014? Thx a lot
Best regards,
Wallace

You can use
sys.Sp_Configure to set max server memory
Here are some recommendation for Max Server memory based on RAM size
GB
MB
Recommended Setting
Command
16
16384
14745
EXEC sys.sp_configure 'max server memory (MB)', '14745'; RECONFIGURE;
32
32768
29491
EXEC sys.sp_configure 'max server memory (MB)', '29491'; RECONFIGURE;
64
65536
58982
EXEC sys.sp_configure 'max server memory (MB)', '58982'; RECONFIGURE;
128
131072
117964
EXEC sys.sp_configure 'max server memory (MB)', '117964'; RECONFIGURE;
256
262144
235929
EXEC sys.sp_configure 'max server memory (MB)', '235929'; RECONFIGURE;
512
524288
471859
EXEC sys.sp_configure 'max server memory (MB)', '471859'; RECONFIGURE;
1024
1048576
943718
EXEC sys.sp_configure 'max server memory (MB)', '943718'; RECONFIGURE;
2048
2097152
1887436
EXEC sys.sp_configure 'max server memory (MB)', '1887436'; RECONFIGURE;
4096
4194304
3774873
EXEC sys.sp_configure'max server memory (MB)', '3774873'; RECONFIGURE;
Hope this will help
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

How to set Border in the Excel using UTL_FILE ?

Hi all,
Any one aware of
How to set Border in the Excel using UTL_FILE ?
Am doing excel creation from a stored procedure.
Thanks
Dora

Hello Dora,
if you need more than simple csv: at Re: How to save a query result and export it to, say excell? you can find links to different solutions. At least the package behind the second link supports defining your own formats (and has a tutorial how to do it).
Regards
Marcus

How to set the full screen mode using setClip method

hi all,
how to set the full screen mode using setClip in that softkeys should not be used insteat on that need to create a own softkeys using commands.
thanks & regards
Bala.

In CS5 there are changes made to how the screen mode is reported. In CS3-CS5 the screen mode has a corresponding number. So for instance if the ScreenMode is set to "Preview Off" and you ask indesign CS3 or CS4 to display the screen mode, it will report "1936552047", while in CS5 it will report "PREVIEW_OFF".
try executing this simple command in respectively CS3, CS4 and CS5 and you will see what I am talking about:
alert(app.activeWindow.screenMode);
there is no difference if you do:
alert(app.activeDocument.layoutWindows[0].screenMode);
The CS5 solution is rather awkward to work with, unless I am missing something? PREVIEW_OFF is not a string, nor is it a number.
Example - doing:
myScreenMode=app.activeDocument.layoutWindows[0].screenMode;
and then trying to reset screenMode by something like:
app.activeDocument.layoutWindows[0].screenMode= myScreenMode
does not work in CS5 of course. It will throw an error. Neither will this line work:
app.activeDocument.layoutWindows[0].screenMode=ScreenModeOptions.myScreenMode;
Any way of working around this?

How to Set "DateOnly" property in DateTimeControl using Javascript.

How to Set "DateOnly" property in DateTimeControl using JavaScript.

Is there any specific reason you want to set it through JavaScript ? You can directly set the DateOnly property in the markup itself.
<SharePoint:DateTimeControl runat=server id="dtControl" DateOnly="true"></SharePoint:DateTimeControl>
Please can you elaborate on what exactly is the requirement for setting this through javascript?
Geetanjali Arora | My blogs |

My system cannot allocate enough colormap entry. How to set Firefox uses less colormap entry?

I have to use depth 8 and PseudoColor becuase a old program requests. If I run Firefox and my old program, I will get a error "Cannot allocate colormap entry for default background". Can I set Firefox to use less Colormap entry?
Nvidia 450
Thanks.
Jeff

Hello,
meanwhile i found a solution for way a) (JCo RFC Provider) in another thread.
Everything is ok so far in my coding above. BUT nowhere in Documentation i found a hint, that using Jco RFC Provider NOT works with EJB 3.0 but with EJB 2.1 !!!
For this i not only have to create the Local Interface which the Bean has to implement. I further have to create the EBJ 2.1 Interfaces as:
public interface FB_BESCHLAGPAKETLocalHome extends EJBLocalHome {
public com.dihug.kall.eel.FB_BESCHLAGPAKETLocalComponent create() throws javax.ejb.CreateException, java.rmi.RemoteException;
and
public interface FB_BESCHLAGPAKETLocalComponent extends EJBLocalObject {
public void processFunction (Function function);
Doing so, the RFC from Abap to Java works with JCo RFC-Provider
Unfortunatly i didn't found it in documentation that this EBJ 2.1 specific interfaces have to be declared even NW 7.11 is a JEE5 Server with EJB 3 Support and a developer on this plattform would normally go the EJB 3 Way.
Even though i now have a working solution it would be interesting how the JRA Way would go.
kind regards
Matthias

How to configure firefox 3.6 proxy through ssh terminal on ubuntu 8.04

I am trying to configure Firefox proxy through an ssh terminal (putty) on Ubuntu 8.04. There in no GUI for the terminal, so am using xvfb to simulate the display. However Firefox cannot open any website because the proxy is not set correctly
Here's what I tried.Edited a loadcustom.js file in
/usr/lib/firefox-3.6x/defaults/prefs
and added the lines
// tell firefox to load customized config file
pref("general.config.obscure_value", 0);
pref("general.config.filename", "firefox.cfg");
Then created a firefox.cfg file in
/usr/lib/firefox3.6x and added the lines
// Lock specific preferences in Firefox so that users cannot edit them
lockPref("app.update.enabled", false);
lockPref("network.proxy.http", "my-proxy.in-my-domain.com");
lockPref("network.proxy.http_port", 8080);
lockPref("network.proxy.type", 1);
lockPref("network.proxy.no_proxies_on", "localhost, 127.0.0.1, 192.168.1.0/24");
lockPref("network.proxy.share_proxy_settings", true);
lockPref("browser.startup.homepage", "http://www.google.com/");
This did not work for me. Any suggestions?

Never mind. I got it working now, I was editing at the wrong place I guess.
I had to add the settings in /usr/lib/firefox-3.6.17/defaults/pref/firefox.js and then restart Firefox. Here's what I added
pref("network.proxy.type", 4); to have Firefox auto-detect proxy settings.

How To Set Up Airport Express To Use With iPad2 For My Needs ?

On the advice of several people in a audio forum, I just purchase an Apple Airport Express. I will be using it with my new iPad 2. What I need to accomplish is using my iPad2 to stream subscription based music from the internet to the Airport Express, and for the Airport Express to connect via toslink cable to the DAC in my audio system.
What I am not sure about is how to set up my Airport Express to accomplish this. I do have a wireless network in my home, but wish to keep the wireless connectivity between the Airport Express and the iPad2 separate from it.
I would greatly appreciate any assistance with this. Thanks.

Deggie, firstly, thank you for your attempt to help. I greatly appreciate it. I connected it via the ethernet cable to the router since when I reconfigured the Airport Express adding it to my existing wireless system, the iPad could not connect to anything until I unplugged the Airport Express. I set it up for an ethernet connection to my router based on that experience.
Either the Ipad does not seem able to send anything to the Airport Express, or the AEX is not passing anything on. I also tried streaming a song stored on the iPad 2 to the AEX with no result, so it is not an issue with the subscription channel.
I don't own a miniplug cable of any sort for further testing, but the toslink cable is brand new, and was literally taken out of its package and plugged in, so I feel it extremely unlikely it is the issue. I've also tested it in three inputs on the DAC, so it is definitely not an issue with it.
I have a question though. You said "when you start your subscription and go to Airplay, does the iPad see the AEX?" You may be on to something there. How do I "go to Airplay" I thought it was just automatic? Also, how do I "select it"? This may be the problem.

How to set tabstops in MS Word using the LabVIEW Report Generation Toolkit

Using the Report Generation Toolkit of LabVIEW, I need to set multiple tabstops that very in distance in MS Word. I also have different sets of tabstops that I use and re-use at different times in the same report. Is there a way to set the tabstops under program control? I searched through the various VIs and found that there is a property ("Tabstops", "Word.Tabstops") in the _ParagraphFormat property node that refers to tabstops. I found it in the Word Format Paragraph (adv) VI. Unfortunately, I could not determine how to use it. Any suggestions? Is this an operational element?

Bluebell,
Sounds like you've already done some fantastic work to expose the various properties and methods of MS Word. It took me about 20 min before I could find the specific property that you were talking about! I found it under Word.Document>>Paragraphs>>Tabstops>>Add. There is a position, alignment and leader parameter that you can set from this property node. I've found that the best way to discover what these parameters do is to simply experiment. You could also try using the macro recorder in Word, perform the specific task, and then look at the code generated. I'm guessing that position sets the position of the tabstop itself. It sounds like your application is really specific. For such a specific task, I think I'd write a macro and call that macro from LabVIEW.
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

How to set-up my home intranet using 2 different ISP's ?

I have had so much trouble recently with my main (8 years now!) internet provider "ABC" (not the real name) Cable Modem here in Belgium that I made the decision to pay another bunch each month to have a second ISP for my home and home office. "XYZ" (also not the real name) will start on Monday 26 July. It is a DSL line, linked to my TV and fixed telephone. Great, except I'm not really sure how to set-up this 2nd ISP.
First, I want this 2nd ISP to (at least for now) be an emergency backup. So if ABC shuts down again (as it has done a lot recently, but no technician can come until 30 July- poor service there!) - I want to immediately be able to use the XYZ server.
OK the XYZ has a kinda built-in router in that the DSL Modem has built-in WiFi and also 2 cable to computer out ports. I believe I can first just configure the WiFi: Apparently I have to attach my MBP-13" via cable in order to change / add a security code; maybe change the name of the WiFi from its default "XYZ-WiFi" (not the real name) to something I want like SteveXYZ and then add a security protection code.
But how to configure my eMail using MAIL? And can I still keep getting my eMail from my main "[email protected]" (not the real address) even when connected via XYZ? And what about SENDING from ABC when connected via the server XYZ?
Also: I currently have my ABC Modem going to a 4-port D-Link DI604 Router. From there, one cable goes to my MacBook Pro-13"; one to the Apple LaserWriter 12/640PS (great printer- 13 years old and still super); one to my Canon MP640 and one upstairs to another router: D-Link DIR-635 wired and wireless. From there, one cable goes to my wife's eMac; and another is available for guests; another unused and then the WiFi for when I compute in the garden and of course for my iTouch.
So now let's say that on 28 July the ABC is down. Ideally I'd like to pull the cable from the ABC Modem that goes into the DI604 Router and plug-in a cable going to the XYZ DSL Modem and voilà have internet back via my backup XYZ. BUT can I print? Do I have to reboot the Router since it will have to reassign those 192.168.0.123 type numbers, won't it? (I believe those numbers are called the "IP Addresses").
Thanks for any comments or references here.
Best regards,
Steve Schulte
Wednesday 21 July 2010

In your Network Preferences you can set up more than one method of connecting - i.e., Airport, Ethernet, Dial-up (heaven forbid). If, for example, you place Ethernet at the top of the list, then Airport, your Mac will try to connect to Ethernet first. If it can't, it will fall back to Airport.
So if you can have Airport connected to one ISP and Ethernet connected to another, you will be able to pick one or the other by imply pulling the Ethernet cord. What you can't do is set up two Ethernet connections (or Airport connections) each with a different ISP (though if I read you aright this isn't what you want anyway).
Another method is to set up 'Locations'. You could set up one with Airport only, and one with Ethernet only, and switch between them using Apple Menu>Locations: this would save you physically pulling cables and is just as quick, it takes only a few seconds.
As to mail, it depends on your ISP. Some ISPs demand that you are connected directly to them to send mail, and possibly also to receive mail: some rely entirely on the password. In the latter case you can use the same settings in both locations or methods: in the former you can't get round that - if you're not connected you can't send/receive as relevant.

How to set up different virtual LANs (using the E3200)?

Hi.
I would like to set up different virtual LANs (using the E3200) so that I can have two different networks that can't access each other.
The E3200 is connected to a modem for internet access.
I would like both networks to have access to the internet.
Does the E3200 alone support creating virtual LANs?
If not, is there another way I can meet the requirement using the E3200 alone (using something other than virtual LANs)?
I'm ultimately thinking that I would need at least one other router.
So for example,
Router A (E3200) is connected to the modem and setup for DHCP using a LAN IP range 192.168.1.1/24.
Router B is connected to Router A and setup for DHCP using a LAN IP range 192.168.2.1/24.
In this way devices connected to Router A should not have access to devices connected to Router B and visa-versa, correct? For example, Device X connected to Router A cannot ping or browse files on Device Y connected to Router B and visa-versa, correct?
Would I need to setup anything else on Router B? For example, do I need to setup DNS settings so that devices connected to Router B can connect to the internet without issue? Would I need to specify that these virtual LANs are not bridged, and on which router, or both?
I already know how to set up a static IP, DHCP, LAN IP ranges, and static DNS settings on a router, etc.
In regards to wireless devices, I am thinking they would follow the same pattern; so wireless devices connected to Router A (E3200) have access to other wired and wireless devices connected to Router A but not to wired or wireless devices connected to Router B and visa-versa. However, if wireless devices currently don't have access to wired devices also connected to Router A, then that is fine for now.
Thank you very much!
-Rami
Solved!
Go to Solution.

The E3200 has no VLAN support according to the manual. There's no way to configure two separate networks with this router alone.
You will need to add network electronics.
Ex:
Managed Switch with VLAN
Another wireless router with VLAN
If your modem supplies multiple public or private IP addresses then you could put a switch after the modem and two wireless routers attached to the switch.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

How to set MQ message header properties using JMS adapter? (10.1.2)

Hello,
I am trying to send MQ messages from a BPEL process. We are using OAS 10.1.2 and JMS MQ adapter. Could you please let me know how to set the message descriptors like message format, type, report and reply to queue properties and queue open options (in jmsAdapterOutboundHeader).
Regards,
Geratayya

put something like this
<activationAgents>
      <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
        <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
        <property name="portType">PARTNERLINK_PORTTYPE</property>
      </activationAgent>
    </activationAgents>

How to set a form element value using javascript?

Hello,
I have been using the following two functions in AS 9.0.2 to set form values in javascript and it works correctly. However, the same code does not work in AS 10.1.2.0.2. Would appreciate if someone could let me know how to set form elements using Javascript(onchange of a field).
function set_item_value(p_field_name, p_value)
var v_index, v_full_name;
for(v_index=0; v_index<document.forms[0].length; v_index++)
v_full_name = document.forms[0].elements[v_index].name.split
if (v_full_name[2] == p_field_name)
document.forms[0].elements[v_index].value = p_value;
function get_item_value(p_field_name)
var v_index, v_full_name, v_return="";
for(v_index=0; v_index<document.forms[0].length; v_index++)
v_full_name = document.forms[0].elements[v_index].name.split
if(v_full_name[2] == p_field_name)
if(document.forms[0].elements[v_index].type != "radio")
v_return = document.forms[0].elements[v_index].value;
else
if(document.forms[0].elements[v_index].checked)
v_return = document.forms[0].elements[v_index].value;
if(v_return == " ")
v_return = "";
return v_return;
Thanks
Dev

This is not the best way to write JavaScript in Portal environment!
You can't be sure that a form is the first in the html source!
In Portal you change the order of your portlets, and also you can have several instances of the same portlet on the same page!!!
You should use qualified form and field names!
Please check the following JPDK methods:
UrlUtils.htmlFormName
HttpPortletRendererUtil.portletParameter

How to set firefox to no proxy using a script on OS X 10.8.5

Similar Messages

Maybe you are looking for