How to set for movement type 601 or 641

Hi,
For SAP standard, movement type 601 and 641 can post from restriced or block stock. In movement type setting, where can I set, then 601 or 641 can only post from unrestricted stock?
Many Thanks
Aries

Hello Aries,
I checked the system & can tell you the following. Only the 601 can book from the restricted (blocked) stock. You can't enter the stock type in the delivery but starting with 470 there's a BAdI, LE_SHP_GOODSMOVEMENT. With this BAdI you can tell the system to post the goods issue from the blocked stock.
The mvt 641 is a different story: This movement type uses the quantity string MAU2. The quantity strings are defined in T156M. This string isn't able to post the GI from the restricted stock.
I hope that this description is OK for you.
Cheers,
Attila

Similar Messages

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • Fld selection for movement type 601/ act 425000

    hi all
    When i try to do PGI for delivery, i am getting given below error.
    "Fld selection for movement type 601/ act 425000 differs for customer goods movement (015)" Please guide me to solve this issue. Rgds
    Madhavan

    Dear Madhavan,
    For mvt type 601,in OMJJ, customer field is set as optional.
    You can check this in OMJJ - mvt type 601 - field selections - Material management.
    Check in FS00 - the field status group assigned to GL account - 40005900, then open the attributes of that field selection group in OBC4, check customer field is suprresed.
    You can change either (suggest to check with FI consultant to change in field status group).
    Alternatively you can go to t/code se38 & run RM07CUFA program with variants to compare these two settings and make necessary changes.
    Hope this could help you resolve this issue. TQ
    rgds,
    nema

  • Fld selection for movement type 601/ act 425000 differs for customer goods

    hi all
    When i try to do PGI for delivery, i am getting given below error.
    "Fld selection for movement type 601/ act 425000 differs for customer goods movement (015)" Please guide me to solve this issue. Rgds
    Madhavan
    Edited by: Madhavan SR on Apr 14, 2010 3:09 AM

    Hi,
    Please run report RM07CUFA for the movement type and account, and check the field selection for
    "Customer goods movement" if the setting is consistent or not.
    Thanks and regards,
    Polly

  • BAPI to reverse Goods Issue for movement type 601

    Hi Everyone,
    Does anyone know of any BAPI that could be use to reverse Goods Issue for Movement type 601?
    I tried using BDC of transaction VL09 and was able to reverse the GI document successfully but the return message type was 'E' with unreadable message -
    Tabelle 'E' enth#t keinen Eintrag f# 'Ch 004 &'
    When I tried using BAPI_GOODSMVT_CANCEL, I get the error message 'E M7 130 Material document cannot be processed'.
    Best Regards,
    Junwen

    hi, Junwen!
    the following code works pretty well:
          fp_vbeln = vbeln_val.
          fp_budat = budat_val.
          fp_tcode = 'VL09'.
          fp_vbtyp = 'J'.
          CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
            EXPORTING
              i_vbeln                         = fp_vbeln
              i_budat                         = fp_budat
            I_COUNT                         =
            I_MBLNR                         =
              i_tcode                         = fp_tcode
              i_vbtyp                         = fp_vbtyp
            TABLES
              t_mesg                          = it_mesg
           EXCEPTIONS
             error_reverse_goods_issue       = 1
             OTHERS                          = 2.
    luck.

  • BADI for movement type 601 and COGS GL account

    Hello SAP expert,
    I am searching a solution from SAP enhancements.
    The requirement is to provide different COGS GL account based on the Customer Account Assignment Group value(KNVV-KTGRD) when SAP performs goods issue. for example, movement type 601,
    This means, when company ships goods to differnt customers, then SAP should generate different COGS GL account.
    for example, when company ships goods to customer account assignment group '01' (Domestic customers), then SAP should generate COGS GL account 818100.
    when company ships goods to customer account assignment group '02' (export customes), then SAP should generate COGS GL account 818200.
    when company ships goods to customer account assignment group '03' (Testing - sample customers), then SAP should generate COGS GL account 818300.
    the logic is following:
    KNVV-KTGRD COGS GL account at goods issue
    01 Domestic 818100
    02 Export 818200
    03 Testing - sample 818300
    04 Testing - VOM 818400
    05 Franchise 818500
    Is there any similar BADI available to solve the above?
    Happy New Year!
    Regards,
    Sylvia Chen

    Hello,
    First of all, Happy New Year!
    Thank you for the tip.
    Enhancement LMR1M002 was already implemented in the current SAP environment.
    The text is "Account grouping for GR/IR account maintenance".
    Function "EXIT_SAPLKONT_011" is the component under Enhancement LMR1M002.
    That is all I can see from SAP.
    I am not an ABAP person.
    Can you provide information for the next step?
    Thank you.
    Regards,
    Sylvia Chen

  • Delivery problem for Movement type 601 & 940

    Hi
    I have created SO & Then delivery
    But when i am checking Goods Movements data, there are 2 different movement types showed for one DN/SO for different material with same issue plant .
    Could you please tell me the cause of this issue.
    Whay it is coming like that. What setting i have to check.
    I need to explain User on this Pls tell em what exactly i should check and confirm to USer
    Kindly help

    Movement types are neither customer specific nor material specific. 
    It is based on your process.  That is if you are selling directly to an end customer who gives payment, then movement type will be 601
    If you sell to an end customer through a warehouse, then the movement type would be 631.  Of course all these movement types as I said above, are being controlled via different schedule line category.
    thanks
    G. Lakshmipathi

  • BAPI_GOODSMVT_CREATE FOR MOVE TYPE 601

    CAN I USE THIS BAPI FOR GOOD ISSUE WITH MOVEMENT 601 FOR OUTBOUND DELIVERY

    see the documentation itself , there u will find what kind of params u have to use.
    Regards
    Peram

  • Val.String WA01,WA02 for movement type 601

    Hi experts,
    can anybody explain the means of val.string WA01 and WA02.
    thank you ahead.
    eric xu

    Dear eric
    the link will answer your question
    [Output Types|http://help.sap.com/saphelp_46c/helpdata/en/4d/2b8c5743ad11d189410000e829fbbd/frameset.htm]
    thanks
    G. Lakshmipathi

  • Amount not turning up for material movement type : 601 from 2lis_03_bf

    Hi all,
    i have loaded the inventory cube from 2lis_03_bx the quantity is turning up for movement type 601 but the amount is not getting reflected it is always blank.
       If   (  SOURCE_FIELDS-BWVORG EQ '000'         "Other Issues
       OR    SOURCE_FIELDS-BWVORG EQ '101'        "Returns / Vendor
       OR   SOURCE_FIELDS-BWVORG EQ '104'         "Material Transfer
       OR  SOURCE_FIELDS-BWVORG EQ '105'          "Stock Adjustment InvD
       OR   SOURCE_FIELDS-BWVORG EQ '106'         "Stock Ajdustment Other
       OR  SOURCE_FIELDS-BWVORG EQ '110' )
       "Issues from stock transfer
       AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
    only movements which are relevant for stock control
       AND SOURCE_FIELDS-BWBREL EQ '1'
       AND SOURCE_FIELDS-BWGEO  <> 0
    SEE OSS NOTE 630254
       AND (  SOURCE_FIELDS-BSTTYP IS INITIAL OR
                   (  SOURCE_FIELDS-BSTTYP CA 'EQ'  AND
                      SOURCE_FIELDS-KZBWS CA 'AM' ) ).
    *IF THE RETURNCODE IS NOTE EQUAL ZERO, THE RESULT WILL NOT BE UPDATED
         RESULT = SOURCE_FIELDS-BWGEO.
    and i can see for other movement type like 641 the amount is turning up.
    Can anyone advise me on this
    thanks

    does the material movement type : 601 will be updated from this data source : 2lis_03_bx nor it is from 2lis_03_um??
    Can anyone advise me on this!!
    thanks

  • No authorization for this transaction with movement type 601

    Dear All,
    This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
    Thanks and regards
    Chandra

    Dear Chandra,
    Check with -
    T. Code: OMJJ
    Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
    Check whether the Transaction is allowed for Movement Type 601 or not
    Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
    Up-there, Tab: New Entry. Click on it.
    Maintain entry as:
    MovTy: 601
    TCode: As reqd.
    and Save.
    Best Regards,
    Amit

  • Account keys for movement type 201.

    Hi Friends,
            Can anybody tell me, what are the account keys (tran/event keys) we will set for movement type 201. And why we are setting that.
    Kindly resolve my doubt please.
    Regards,
    Prasath

    Hi
    The Transaction Event key set for movement type 201 is WA.
    WA - Goods Issue Document.
    In the account detemination for movemnt type 201 the Account modifier VBR is assigned for determining the offsetting account for consumption posting
    Thanks & Regards
    Kishore

  • Need Fields KDAUF, KDPOS, BWART update in table GLPCA for movement type 633

    Hi All,
    I need following field update in Table GLPCA for movement type 633 (Consignment Issue):
    KDAUF : sale document no.
    KDPOS : Order Line Otem
    BWART : Movement Type
    The same fields are updated for movement type 601 (Standard order). Also I checked with Table MSEG and find the same as above.
    Thanks in advance.
    AT

    You should use the BAPI instead BAPI_GOODSMVT_CREATE
    of BDC.
    http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
    Welcome to SDN. Please be sure to award points for any helpful answers and mark  your post as solved when solved completely.  Thanks.
    REgards,
    Rich Heilman

  • How to set field "vendor" as optional for movement type 221

    Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
    Any help will be highly appreciated.
    Best regards!

    Let me understand ,
    u want to reserve stock with MB21 with optional for vendor code  or name .
    then against the reservation u was t to issue to cost centre or production with 201 rt .
    If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
    ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
    possible check is Movement type - screen in omjj
    GL account variant settings
    MB1a setting
    last option - create a screen variant with SHDO tode and activate it .
    all will be at client level so please

  • How to know debit and credit transaction key for movement type

    Hi,
    With T. code OMWB  account assignment simulation we can see all the accounts which are involve for debit and credit enties   but I want to know is there any T. code or method  with which we can know  which transaction key will be debit and which will be credited  like  for movement type  101 the transaction keys are GBB, BSX  WRX  etc.  i want o know whethere GBB a

    Hi,
      Thanks for your reply,  but with this we can see the for GBB which is the credit account and which account is use for debit entry,  like this for all transaction event key like WRX, BSX etc. we can see the G/L account use for Debit and credit,  but i want to know for particular selction of Plant, material , movement type,  my GBB account will have entry in debit account or credit account  How we can know this.
    regards,
    zafar

Maybe you are looking for