How to set gprs setting
guies ihave some problems with my gprs settings
my devise is tour 9630 v 4.7
my provider cant send gprs configuration setting by sms
i have to set manually
its the settings:
Name: Irancell-GPRS
APN: mtnirancell
10.131.26.138 roxy
Port: 8080
where should i set them?
Hello Chipmunk,
Do you have an active data plan with your mobile network provider?
Do you get a lowercase edge but want to see gprs instead?
Are you able to use the voice part of your BlackBerry?
Thanks.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
How to set gprs setting manualy?
hi.Im from Armenia and i cant set my blackberry gprs settings.here we can do it manualy only.I put APN, username and password, but it doesn't work.Can you help by any advice?
Hello Chipmunk,
Do you have an active data plan with your mobile network provider?
Do you get a lowercase edge but want to see gprs instead?
Are you able to use the voice part of your BlackBerry?
Thanks.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
How to set gprs settings in i phone 4
Dear Sir
How to set GPRS settings in i phone 4 pls send me the details
ThanksSee pages 11 and 135 of the iPhone User Manual:
iPhone User Guide (For iOS 6.1 Software) -
How to Set/Configure Manual GPRS Setting with Asha...
Can any one help me with to set manual GPRS setting for Nokia Asha 200.
I want to change the GPRS setting, But there is no option for "Edit" or "New" (Configuration)
Thanks
RickyHi framor,
Welcome to Nokia discussions board!
In order to set up an internet access point for your Nokia Asha 200, please follow the steps below:
Menu
Settings
Configuration
Personal Settings
Add (or add new)
Internet
Edit account name > input operator’s settings
Select “No” in use “preferred access point”
Access point settings
Bearer settings
Edit “packet data access point” > input operator’s settings
Back 4 X
Default config. Settings: select “personal configuration”, and click on “by default”
By default in apps: select “yes”
Please ask your operator to send you an SMS for automatic set up. If you have an issue connecting to the internet, you may set up the access point manually as described above.
For further support on internet acces on your device, please contact your operator.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
Astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.
You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs. -
How can I re-set the App Store so the Updates will again appear under the Updates tab?
Hi,
I am running a Macbook Pro (retina). Lately when I launch App Store and click on Updates the software updates for the software on the Macbook do not show up under the Updates tab. However, when I go to the Purchased tab I see there Update buttons next to programs that have updates ready to download.
How can I re-set the App Store so the Updates will again appear under the Updates tab?
Many Thanks,
DavidWanna know this too
-
How to change a setting in the Java Control Panel with command line
Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AMOK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
$ConfigFile_1 = @TempDir & "\deployment.properties"
$ConfigFile_2 = @TempDir & "\deployment.config"
FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
Sleep(10000)
FileDelete(@TempDir & "\deployment.properties")
FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM -
when i try to set up my icloud account the system says it is sending me an email to verify. I never get the email and it is not in my spam filter. How can i get set up??
Make sure that your Apple ID is your email address and you do not have any other or old IDs associated with you. Go to www.appleid.apple.com and confirm this info. Make sure that the email address you are trying to sign up with is your primary one.
-
HOW THE ************** Do I set up nokia messaging on the 5800? Please if somone can help me I shall burn an effigy in your honour.
First A person in the UK CANNOT set up a Nokia mail account. You go to email.nokia.com, you select your device and enter your phone number. Supposedly you receive a text message with a link to somthing or other, IT NEVER ARRIVES. The site then instructs you to navigate your phone to email.nokia.com. You go there and download nokia messaging (again) and re-install it (again).
You then proceed to to run the set up email program (the pink @ sign that now appears in applications) and go through the process of typing in an email account details. At the end it should ask if you want to add it to a nokia messaging account or not. IT NEVER DOES THIS. It only ever adds the email to the **bleep** inbuilt polling email thing in messaging.
So, the user cannot make a nokia messaging account online OR on the handset which raises question 1.
1. HOW THE HELL DO YOU CREATE A MESSAGING ACCOUNT IN THE FIRST PLACE?
Being no stranger to nokia messaging and after attempting the above several times I decided to use my E72. I removed all my email addresses (so my nokia email account was no longer associated with that device) and set it up for my wife (who owns the 5800). This allowed me to create a nokia messaging account for her (finally).
Now she could log into email.nokia.com and add her email addresses. Now when I entered her email address into the 5800 it asked if it wanted to add the email to her nokia messaging account (FINALLY) and I was able to put her email onto her 5800 through nokia messaging. Phew, it only took 3 hours.
Next step, remove her nokia messaging account from my E72 in order that I may have my account back on my e72. When this was done the wife receives an email telling her that her subscription had been cancelled from her 5800, I assume becasue it detected me using it from my E72 when removing the accounts.
So, I try to re-setup nokia messaging on her device again on, it should be a lot easier as she now has a nokia messaging account right? When I enter her nokia messaging email address it will automatically associate the nokia messaging account with the 5800 again, right?
WRONG
now when I try to set up the email the option of adding the account to the nokia messaging service is never shown instead it adds it as the crumby polling email thing built into the device. This leads me to my 2nd question.
2. HOW THE HELL DO I MAKE THIS USELESS PIECE OF **bleep** WORK?
I am no noob, I have had nokia devices for the past decade and used symbian all the way since s60v1. However this has bowled me over with retarded idiocy.
Do I have to make a pentagram of dku-2 cables with a symbain device at each point facing norway smeared with the blood of a virgin blackberry user?
Please someone, tell me what the **bleep** must do to simply get this **bleep** email to work. I am fuming with rage right now and at the end of my tether.
P.s. No i will not do another hardware reset.
MODERATOR'S NOTE:
Hi,
Language edited by a moderator. Please show some respect towards other users of this public forum.vi__ wrote:
Next step, remove her nokia messaging account from my E72 in order that I may have my account back on my e72. When this was done the wife receives an email telling her that her subscription had been cancelled from her 5800, I assume becasue it detected me using it from my E72 when removing the accounts.
So, I try to re-setup nokia messaging on her device again on, it should be a lot easier as she now has a nokia messaging account right? When I enter her nokia messaging email address it will automatically associate the nokia messaging account with the 5800 again, right?
WRONG
At the very least you would need to contact Nokia to re-instate your wife's account and I hope you are on Orange as otherwise you won't get very far in the UK as here:
/t5/Messaging-Email-and-Browsing/Nokia-Messaging-Has-Aligned-with-Orange-UK/m-p/764736/highlight/tru...
Happy to have helped forum with a Support Ratio = 42.5 -
I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory?
You can re-download the software from Download CS5.5 products
Install and enter your serial number when prompted.
Find your serial number quickly -
How can I get/set the vaule of a varibale in the planning function
Hi All,
in the fox I can get the value of a variable using VAR(), but How can I get/set it in a normal planning function?
any proposal would be very appreciated.Hi,
Call following functions
1. To get the current value of a planning variable call funtion
API_SEMBPS_VARIABLE_GETDETAIL by passing Area and variable name
2. To set the value of a variable call function
API_SEMBPS_VARIABLE_SET and pass planning area name and variable name.
Award the points if thsi solves your purpose.
Regards,
Deepti -
I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?
Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing
-
How to get Document Set property values in a SharePoint library in to a CSV file using Powershell
Hi,
How to get Document Set property values in a SharePoint library into a CSV file using Powershell?
Any help would be greatly appreciated.
Thank you.
AA.Hi,
According to your description, my understanding is that you want to you want to get document set property value in a SharePoint library and then export into a CSV file using PowerShell.
I suggest you can get the document sets properties like the PowerShell Command below:
[system.reflection.assembly]::loadwithpartialname("microsoft.sharepoint")
$siteurl="http://sp2013sps/sites/test"
$listname="Documents"
$mysite=new-object microsoft.sharepoint.spsite($siteurl)
$myweb=$mysite.openweb()
$list=$myweb.lists[$listname]
foreach($item in $list.items)
if($item.contenttype.name -eq "Document Set")
if($item.folder.itemcount -eq 0)
write-host $item.title
Then you can use Export-Csv PowerShell Command to export to a CSV file.
More information:
Powershell for document sets
How to export data to CSV in PowerShell?
Using the Export-Csv Cmdlet
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to enable user sets from tools in sales order
Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
ThanksHi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri -
How to multiple/ parallel sets of books to generate more than one financial statement based on different (or the same) accounting principles.
My Client needs Parallel Ledger in SAP B1 similar like SAP ECC. Is this functionality available ?Dear Mr. Nagrajan,
Thank you for your response. I have already gone through documents but not able to understand. Is there any setup for this ? or its just work around i.e. using template and special field in JV i.e. Ref. 1 /2
My doubts :
I understand that Chart of Account structure is one and common for IFRS and other accounting method. We need to create only those account separately ( 2 times with prefix like IFRS revenue account, GAAP Revenue account).
Now at time of entry, Assume some entries / adjustment are specifically for IFRS and not for other ledger. In this case, What need to do ?
You have mentioned about DTW approach but do we need to insert all JV's again with other ledger ?
Someone suggested that if any entry which are specific to IFRS Ledger, We need to user Ref.1 /2 column or Transcation code column and in which we can put IFRS
Based on this, Need to create 2 seperate template for IFRS and other ledger for all report.
This is my understanding of Solution in SAP B1. Please help me to clarify my though process
Please do needful.If you have done implemenation and if you can share doucment, it would be great help.
Email :[email protected]
Maybe you are looking for
-
Hi, My question relates to the use of Time Machine for two different Macs ... I have two Macs: a MacBook Pro (ML) and an iMac (SL). I use Time Machine for both. Unfortunately, the external HDD (A) drive I use for the backup of my MacBook Pro is on th
-
I have Firefox 2.0.0.12 on my Mac OS X Version 10.5.8. I do not have an Intel processor so I cannot download Firefox 7. What can I download for e.g 3.0. How do I do that on the web-site? Thank you, Harris Clemes
-
Popup reuse and instantiate data within the popup
Hi, I'm trying to implement a popup I can use to edit values via a form. I only pass an ID to the popup. The popup will contact a datasource to load the data from a database, based on the ID, and pre-fill the form. If no ID is passed (or empty), the
-
Vertical stripe comes out on screen when booting up x230
hi guys! this is my first post and i'm nub here Those kind of stripe comes out before bios screen for like 0.1 sec really really short period of time. it doesn't cause me any problem in normal use cuz it happens only when booting the laptop in the tw
-
Elements 10 trying to delete clip
Elements 10. I have a clip on the sceneline that is blank and takes up 3 minutes. I have selected clip and hit delete, but it will not delete. It is like empty space. Huge movie tonight with family. Ughhhh. Thanks.