How to set  gr error message if mat. and chapter id combination is missing.

Can we have std setting while doing GR that for particular material chapter id combination is missing....
If there is no mat. and chapter id combination it wil issue a error while GR....
How we can configure it......
thanks in advance
Navin

you can change the message control through the following path
go to transaction spro
spro > logistic general > tax on goods movement > india > tools > message control.
from here you can change the message control.
but if you did not mention the material and chapter id combination the system wont ask you for the excise entry at the time of gr.
****plz let me know whether you have suceded or not*******
Edited by: diptasya jash on Jun 2, 2008 8:36 AM

Similar Messages

  • How do I correct error messages MSVCR80.dll and windows error 7 126?

    After installing the latest itunes update, I received two error messages:  MSVCR80.dii and windows error 7 126?  I cannot access itunes at all and am eager ti fux these errors.  If Apple itunes is at fault I sure wish they would fix the problem.  At least I'll save money if I can't access itunes! 

    Hey koicaretaker!
    Here is an article that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How to set the error message when LIV amount over PO amount ?

    Dear experts :
    I create a PO without GR base IV , and I have setting limit in OMR6.
    I hope system show error message when the LIV amount over PO amount .
    But in fact , when LIV amount over PO amount , the system didn't show any message.
    Hope someone can tell me ,besides OMR6, what setting I need do?
    Thanks a lot.

    Please use T code OMR6 & assign tolerance key for plant & Tlky -> BD TO "zero".
    Regards
    Bhavesh Mistry

  • How to programmatically set an error message for a validation rule of an EO

    Hello,
    Is there a way to programmatically set an error message when validating any data on an EO?
    It seems the API of the EO interface does not have any method to be defined for my needs..
    thanks

    The other option is that for the error message you can define a groovy expression to call an EO method.
    I documented this on my blog
    http://blogs.oracle.com/grantronald/entry/dynamic_error_messages_from_a
    Regards
    Grant

  • How to show custom error message in WebADI Excel template?

    Hi,
    I've  created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
    WebADI Interface API Returns is set to  "Error Message".
    I'm using  raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL  is not populated on the excel template.
    Instead it is showing "SQL exception occurred during PL/SQL upload".
    Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
    TIA
    Narasimha

    The custom API errors are visible in the BNE log but not on the Excel.
    BNE Log=>
    12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API.  Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID -  Enter PO_NO -
    ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
    ORA-06512: at line 1
    12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID -  Enter PO_NO -
    ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
    ORA-06512: at line 1
      at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
      at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
      at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
      at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
      at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
      at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
      at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
      at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
      at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
      at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
      at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
      at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
      at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
      at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
      at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
      at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
      at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
      at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
      at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
      at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
      at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
      at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
      at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
      at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
    12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
    12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection.  There may be transaction problems.
    How to show the same error in the excel template?
    Here is the package:
    CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
    AS
       PROCEDURE upload_data (
                              P_CONTAINER_ID IN VARCHAR2
                            , P_SAIL_DATE IN DATE
                            , P_PO_NO IN VARCHAR2                     
                             ) IS
        --declare
        lv_err_msg      VARCHAR2(240);
        lf_err_flag     NUMBER := 0;
        ln_temp         NUMBER;
        BEGIN
        --------------------- checking for mandatory parameters---------------------------
          IF (P_CONTAINER_ID IS NULL) THEN
             lf_err_flag := 1;
             lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
          END IF;
          -------------Validation for Sail Date Format----------------------
          IF (P_SAIL_DATE IS NULL) THEN
             lf_err_flag := 1;
             lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
          ELSE
             BEGIN
                SELECT 1
                  INTO ln_temp
                  FROM DUAL
                 WHERE P_SAIL_DATE =  TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
             EXCEPTION
                WHEN NO_DATA_FOUND THEN
                   lf_err_flag := 1;
                   lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
                WHEN OTHERS THEN
                   lf_err_flag := 1;
                   lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
             END;
          END IF;
          -------------Validation for PO_Number----------------------
          IF (P_PO_NO IS NULL) THEN
             lf_err_flag := 1;
             lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
          ELSE
             BEGIN
                SELECT count(1)
                  INTO ln_temp
                  FROM PO_HEADERS
                 WHERE Attribute4 =  P_PO_NO;
             EXCEPTION
                WHEN NO_DATA_FOUND THEN
                   lf_err_flag := 1;
                   lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
                WHEN OTHERS THEN
                   lf_err_flag := 1;
                   lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
             END;
          END IF;
         -----------------------Insert Record----------------------------
         IF lv_err_msg is NULL THEN
         BEGIN
             INSERT
              INTO XXP2P_HW_COST_FACTORS_STG
                     CONTAINER_ID
                    ,SAIL_DATE
                    ,PO_NO
                    , ERROR_FLAG
                    , ERROR_MSG
                   ,CREATED_BY
                    ,CREATION_DATE
                    ,LAST_UPDATED_BY
                    ,LAST_UPDATE_DATE
                    ,LAST_UPDATE_LOGIN              
                VALUES
                     P_CONTAINER_ID
                    ,P_SAIL_DATE
                    ,P_PO_NO              
                    ,lf_err_flag
                    ,lv_err_msg
                  ,FND_GLOBAL.USER_ID
                    , trunc (sysdate)
                    ,FND_GLOBAL.USER_ID
                    , trunc (sysdate)
                    ,FND_GLOBAL.LOGIN_ID              
                  --  commit;
                  DBMS_OUTPUT.put_line
                    '-' || 'After ap_invoices_interface'
            EXCEPTION
            WHEN OTHERS THEN
              ROLLBACK;
              lf_err_flag := 1;
              lv_err_msg  := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
              raise_application_error(-20001, lv_err_msg);
            END;
        ELSE
              raise_application_error(-20001, lv_err_msg);
        END IF;
      END upload_data;                        
    END XXPO_COSTFACTS_WEBADI_PKG;

  • How to display an error Message in Web Dynpro

    Hello,
    I want to display an error message in Web Dynpro. I'm using this,
    IWDMessageManager message = wdComponentAPI.getMessageManager();
    message.reportSuccess("<some relevant debug message>");
    However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
    Thanks
    Regards
    SU

    Hi,
    If you include the UI, it will display at the top of the screen..
    Please see below how to create a message in the message editor.
    http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
    and this is how you access the error message in the application ti display it to the end user
    http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
    Regards,
    Ganesh N

  • How to customize the error messages in web analysis reports

    Does anyone know how to customize the error messages that web analysis shows ,
    I want to customize the below error message with a custom error message
    "Document does not exist or no authorization to open document.Error occurred while loading document"
    Does anyone know how to do this ?

    Rajesh,
    you may want to check these links
    How to the Change the Application Stopped Message
    How to Change the Dispatcher Running, No Server Connected Message
    http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
    Thanks
    Bala Duvvuri

  • How can we trigger error message in BADI PARTNER_UPDATE

    Hi All,
    I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
    It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
    In short dump it gives error The COMMIT WORK processing must not be interrupted.
    Kindly suggest me that how can we pass error message and it also does not freeze the fields.
    Regards,
    Narendra Goyal

    Hi Narendra,
                          How are you trying to display message.
    Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
      Please try different approaches and see what works for you.
    Thanks,
    Rohit

  • How to delete the error message in the Web page Message Monitoring

    Hi All:
    I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
    But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
    How can I delete those message both successful and error.
    Thanks All
    Elliott

    Hi Elliot,
    SXMB_ADM
    Integration Engine Configuration
    Specific Configuration
    Category: DELETION
    Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
    Subparameters: SYNC, ASYNC
    Change "Current Value".
    and execute your delete job again!
    Regards,
    Udo

  • How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

    how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

    The troubleshooting C17 is the specific article.
    http://pondini.org/TM/Troubleshooting.html
    This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
    So download the real utility. Run it instead of v6 toy version.
    http://support.apple.com/kb/DL1482
    Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

  • How to populate a Error message in WebUI Screen

    Dear Experts,
    I have a small issue in Lead creation screen. I need to restrict the followup document if the lead end date is lesser than the system date, if the end date lesser than the system date system should through a error message in web Ui Screen and the lead follow up creation should be stoped.
    We found an enhancement spot in backend(GUI) of lead creation we raised the error message in the backend screen. Here its working fine, But we are not able to get any error message in WebUI lead creation screen.
    We written the code in CREATE_ORDER Method of lead creation in GUI ( tcode : CRMD_ORDER). We tried to debug the program using external debuger from webui but its not getting triggered.
    Pls suggest me, how to raise a error message for WEBUI lead follow up creation validation.
    Kindly do the needful.
    Reg,
    Anandhan

    HI Anandhan,
    Try this way,
    This should work.
    lr_global_messages type ref to cl_crm_genil_global_mess_cont,
            lr_core                 type ref to cl_crm_bol_core,
      "Instantiate the error message class.
      lr_core = cl_crm_bol_core=>get_instance( ).
      if lr_core is bound.
        lr_global_messages ?= lr_core->get_global_message_cont( ).
      endif.
            if lr_global_messages is bound.
              call method lr_global_messages->add_message
                exporting
                  iv_msg_type       = lv_msg_type
                  iv_msg_id         = '
                  iv_msg_number     =
                  iv_show_only_once = 'X'
                  iv_msg_v1         =
                  iv_msg_v2         =
            endif.

  • How to display an error message after validation in Formatted Search?

    Hi SBO experts,
    if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
    Thanks & Regards,
    Raghu Iyer

    i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
    if $[$38.11.0] > 50
    begin
    select @error = 1
    select @error_message = 'Vendor code cannot begin to X sign.'
    end
    the system throws the error : Internal error (8180) occurred [Message 131-183]
    actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
    if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode]  = $[$38.1.0]) > 0
    begin
    select @error = 1
    select @error_message = 'Error in Quantity.'
    end
    but, this expression to get the remainder itself seems to have some error
    $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode]  = $[$38.1.0])
    i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
    Regards,
    Raghu Iyer

  • How to display an error message on screen?

    Hi experts,
    In screen painter, how to display an error message in the message area just below the screen?
    Thanks!

    hi wuyia,.
    Write like this;
    Message 'Process completed Successfuly' TYPE 'S'.
    Message 'Want to Overwrite Value' TYPE 'W'.
    Message 'Press enter to continue' TYPE 'I'.
    Message 'Invalid Input' TYPE 'E'.
    S - Success
    W - Warning
    I - Information
    E - Error
    You can adjust your GUI option to display the message in a Popup or in the status bar.
    Regards
    Karthik D

  • How to configure a error message

    Hello,
    I have a User bean that hold informations about a user login ( login and password ). I write a method protected String logon() that search if the login and the password entered by the user match with those stored in a database. If not, i would like to add an error message to the FacesContext and so return null value.
    My question is : how to add an error message to the FacesContext and so to get it in the current page.
    Thanks

    Hi flam70,
    well, in my opinion you should do any access to your business logic in an action class and in the invoke application phase and not in the validation phase.
    Your Action class returns e.g. "success" if the user passed the authentication and "null" if not (if jsf gets null value it returns on the same page back)
    To put the error message into context you may do following:
    In the invoke() Method of your Action class do authentication against your database.
    If it fails, use the component(s) that were wrong for the error message(ids e.g. "username" and "password").
    Add the message into context:
    context.addMessage(nameComponent, new MessageImpl(Message.SEVERITY_INFO, "Username not found !", "LoginError"));
    context.addMessage(passwordComponent, new MessageImpl(Message.SEVERITY_INFO, "Password wrong !", "LoginError"));
    On your jsp page you use the error tag:
    <h:output_errors for="username" />
    <h:output_errors for="password" />
    Greetings,
    Rene

  • How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

    How does one fix error message "There is a problem with Adobe Acrobat/Reader.
    If it is running, please exit and try again. (6:6)

    http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page.  The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association.  I have just gone through every link on the site and a number of links when clicked on will not bring up the material.  I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page.  However when I went back to test all the other links I found that the problem was still re-occuring.  This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now.  I downloaded adobe 10.1 on 8 March 2011.
    I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
    If you can help I would appreciate it.
    Pat

Maybe you are looking for