How to set Internet connection in solaris for DataOne Service in India?

I am using a P4 system with Inter Board D945GTP and i have a internet connection from BSNL. I wold like to connect internet to Solaris express Developer Edition 2/07
Help me!
bye
P.Sathish Kumar

In India one need to configure pppoe for connecting BSNL DataONE broadband. So here is a reference quick guide to setup pppoe for BSNL DataONE
SUNW ppp packages should be already available for you. If you didn't install, you need the following packages. Install them from Solaris CD.
Packages
SUNWpppd - Solaris PPP Device Drivers.
SUNWpppdr - Solaris PPP configuration files.
SUNWpppdt - Solaris PPP Tunneling.
SUNWpppdu - Solaris PPP daemon and utilities.There will be a file myisp.tmpl in /etc/ppp/peers directory. Copy the file to a filename /etc/ppp/peers/bsnl
~# cp /etc/ppp/peers/myisp.tmpl /etc/ppp/peers/bsnl
Note the conventions used here
USERNAME       - is your BSNL id eg (userid)
PASSWORD       - provided by bsnl (*****)
INTERFACENAME - is your ethernet card name eg (bge0, hme0....) Edit /etc/ppp/peers/bsnl file using an editor. The uncommented section should look like the following:
Where INTERFACE should be your ethernet interface name and USERNAME is your broadband user name.
connect "/usr/bin/chat -f /etc/ppp/myisp-chat" # dial into ISP.<br>
sppptun
plugin pppoe.so
connect "/usr/lib/inet/pppoec INTERFACE"
user USERNAME           # my account name at my ISP
remotename bsnl # name of the ISP; for pap-secrets
noauth                  # do not authenticate the ISP's identity (client)
noipdefault             # assume no IP address; get it from ISP
defaultroute            # install default route; ISP is Internet gateway
updetach                # log errors and CONNECT string to invoker
noccp                   # ISP doesn't support free compressionNow there are two configuration files that needs to be updated.
/etc/ppp/pap-secrets
/etc/ppp/chap-secretsIn these two files add the entry as follows
USERNAME        bsnl    PASSWORDWhere USERNAME is your broadband username and PASSWORD is you broadband password. Your configuration is almost completed. Now for connecting:
#/usr/sbin/sppptun plumb pppoe INTERFACENAME
#/usr/sbin/sppptun plumb pppoed INTERFACENAME
#/usr/bin/pppd debug call bsnlYou need to specify dns server to resolve dns names. Create a file in /etc with name /etc/resolv.conf and copy the nameserver info. For example:
echo nameserver 61.1.96.71 > /etc/resolv.confNote: The IP specified here is BSNL nameserver. Please ask your BSNL operator for exact dns address. Or else you can use the opendns.com server IP.
cp /etc/nsswitch.dns /etc/nsswitch.conf Make a backup copy so that you can copy back when needed.
cp /etc/resolv.conf /etc/resolv.conf.bsnlIn case you are still not able to resolv dns name, check if dns/client service is running or not.
svcs -a | grep dns/clientIf not enable
svcadm enable dns/clientIf not online, try starting
svcadm restart dns/client
or
svcadm refresh dns/clientHere is a simple script that can help you for connecting after configuring PPPoE.
#!/usr/bin/bash
ifconfig bge0 plumb
pkill -9 pppd
/usr/sbin/sppptun plumb pppoe bge0
/usr/sbin/sppptun plumb pppoed bge0
sleep 5
/usr/bin/pppd debug call bsnl
echo nameserver 208.67.222.222 > /etc/resolv.conf
echo nameserver 208.67.220.220 >> /etc/resolv.conf
echo nameserver 61.1.96.71 >> /etc/resolv.conf
cp /etc/nsswitch.dns /etc/nsswitch.conf
svcadm restart dns/clientRegards
Britto

Similar Messages

How to setup Internet connection in Solaris 10

Hi All,
I recently installed Solaris 10 in my laptop as a guest OS which is having Host OS of Windows 7 by using Virtual Box.
I shared all my hardwares and network connection and still I cannot use the internet connection in my guest OS (Solaris 10).
I'm new to this could anyone please provide steps to set up internet connection in Solaris 10???
Thanks,
Mahesh

user8473723 wrote:
All
I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. You need to determine whether your NIC is even supported.
(but you kept that particular information a secret in your forum post)
If the Ethernet chipset is supported, you then need to install the drivers.
By the way, very few wireless networking chipsets are supported.

How to setup internet connection in Solaris 10 X86

All
I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. Can you please provide me some info on this ? I have Comcast broadband cable modem installed at home.
Thanks
Murali

user8473723 wrote:
All
I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. You need to determine whether your NIC is even supported.
(but you kept that particular information a secret in your forum post)
If the Ethernet chipset is supported, you then need to install the drivers.
By the way, very few wireless networking chipsets are supported.

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

How to set Internet limits to particular user by gpo ?

How to set Internet limits to particular user by gpo ?
Thanks & Regards, Amol . Amol Dhaygude

Hi,
>>How to set Internet limits to particular user by gpo ?
What Internet limits do you want to set for specific users? Group Policy user settings can be configured to apply to specific users, like via security filtering or GPP item-level targeting. The path for Internet Explorer policy settings under User Configuration
is: User Configuration\Policies\Administrative Templates\Windows Components\Internet Explorer.
You can also use GPP Internet Settings extension to manage IE settings and use GPP ILT to apply the settings to specific users. However, GPP settings can be edited by standard users after getting applied.
Regarding GPP Internet Settings extension, the following article can be referred to for more information.
Internet Settings Extension
http://technet.microsoft.com/en-us/library/cc754649.aspxBest regards,
Best regards,
Frank Shen

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

TS1398 My internet connection was lost for 30mins, since then my ipad won't reconnect.

Since my internet connection was lost for 30mns, my ipad will not not reconnect with the wifi, what can I do?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How to set a default colour & thickness for rectangle in preview?

How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .

Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

How to set a default Billing type for a particular Delivery type

Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
Rajesh

There is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How to set ORACLE_HOMES on Windows 2000 for 11i

How to set ORACLE_HOMES on Windows 2000 for 11i
As am newbie on windows.
Its very urgent.

To set ORACLE_HOME on Windows:
C:\> set ORACLE_HOME=<location>
i.e.
C:\> set ORACLE_HOME=d:\oracle\proddb\10.2.0
To verify:
echo %ORACLE_HOME%
In Apps 11i, you do not have to set it manually, just source the environment file and this will set all environment variables for you.
- To source the application env file, run envshell.cmd under %APPL_TOP%
- To source the database env file, run <SID>_<hostname>.cmd under %RDBMS_ORACLE_HOME%

How to set Internet connection in solaris for DataOne Service in India?

Similar Messages

Maybe you are looking for