How to set IPaddress to a VM which has Linux OS using powershell remoting.

I have downloaded the SetLinuxVM scripts for setting the ipaddress of virtual machine which has Linux as OS. I have 2 different Hyperv host machines for Eg: HostServer1 and HostServer2 and I have installed SetLinuxVM scripts on server HostServer1 but
my LinuxVM is created in HostServer2 and is highly available.
Now I have development server from where I connect to any of these HyperV servers remotely .
I have created powershell remote session from my development server to HostServer1 where SetLinuxVM scripts are installed and excuting the script as given below.
Set-LinuxVM -VMName "TestLinuxVM" -Manager "Hyper-V" -VMHost "HostServer2"
-Username "root" -Password "Gen#123" -Hostname "TestLinuxSrv " -IPAddress "192.168.2.2" -SubnetMask "255.255.0.0" -GatewayAddress "192.168.2.1" -PrimaryDNSAddress "8.8.8.8"
Even though I am providing the -VMHost and even if the VM is in cluster its not executing the scripts and I am getting the error WMI not available.
Its working fine if the scripts are installed on HostServer2 where the LinuxVM is created but my question is that do we need to install the scripts on all HyperV hosts then whats the use of the above parameter -VMHost "HostServer2" because if
the hyperv host is remotely connected using powershell we need to provide the VMHost name in the above scripts.
From the examples provided in the SetLinuxVM module my understanding is that if the SetLinuxVM module is installed in any of the Hyperv servers which are in a cluster and even though the VM is created in any of the servers and is highly available by just
providing the VMHost for that particular VM we can set the IPadress ,hostname etc by connecting remotely using powershell to the HostServer which has SetLinuxVM module by providing the VMHost name in the above script .
Hoping that my problem will be resolved at your earliest convenience.
Thanks in advance,
Fayaz Syed.
FayazSyed

I am not familiar with these scripts, but in general any modules must exist on the target Hyper-V server.
The commands do not appear to be suing SCVMM, in which case you would execute the PowerShell script at the VMM console machine.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Similar Messages

How to get value of a textfield which has been set as Renderd false.

Hi all
how to get value of a TEXTFIELD which has been set as Renderd false.
i am getting the value of this textfield from an lov but dont want to show it to the user.
getting error as:
attribute xxxx required for view object yyyyy.
pls help
naveen

You can create item inside your LOV region, set the item style to formValue. You can associate this to a View Object field. It can also act as mirror of any other text input field.
FormValue can hold the value and will not be diaplyed to user. You can read value from it controller
example
OAFormValueBean orgValue = (OAFormValueBean)webBean.findChildRecursive("OrgIdFormVal");
Or you can read it fro the VO associated with this form value.

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

HT204394 How can I expunge my iCloud account which has become contaminated and open a new one?

How can I expunge my iCloud account which has become contaminated and open a new one?

If you want to create a new iCloud account, go to Settings>iCloud, tap Delete Account, then sign back in with a different Apple ID to create the new account. If you have any photo stream photos that you want to keep, save them to your camera roll before deleting the account.

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How do I remove a gmail calendar which has inadvertantly become merged with my home apple calendar

how do I remove a gmail calendar which has inadvertantly become merged with my home apple calendar?
I have to view the gmail calendar as well, but now some entries are appearing as duplicates.
Currently I view my own apple calendar (home), a gmail calendar, a googlemail calendar and a friend's icloud calendar on the same screen - (all view only).
Hiding or deleting either the gmail OR the Home calender leaves me with missing entries.
Showing both gives duplicates.
Help please.
Earlier today, I lost my friend's calendar (icloud on an iPad) when he accidentally changed something. Trying to get that back (unsuccessfully) he or I must have inadvertantly changed someting, but don't know what.
I also view my calendar on ipad2 and iphone 5, but have not touched any of these settings.
Getting desperate! - the gmail and googlemail are the church calendars and there will be chaos if I can't get this fixed!

pretty sure in the settings -> email and stuff or maybe the notifications you can disable the gmail calendar at least theres where mine are along with the facebook and the other calendars you can add and remove

PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

Thanks for the quick response ...
I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

Actually, there is a Nik/Nikon connection — but I am pretty sure it is irrelevant to the OP's question. The connection is that Capture NX2 was written as a joint venture between Nikon and Nik. (The name similarity is a coincidence.)
Capture NX2 is a cool program that incorporates the features of Nik's Viveza and Nikon's Raw processing engine, along with some other powerful image adjustment features. It provides, like Aperture, a losses workflow. Unlike Aperture, the adjustments (Edit Steps in C-NX terminology) are saved in the original NEF file along with the un-altered raw data. Multiple versions can be saved in a single NEF.

How to find material and vendor combination which has freight conditions?

Hi Please help me, its very urgent.
How to find material and vendor combination which has freight conditions?
Waiting for your help.
Regards,
Marella.

Hi marella,
Try MEKA transaction.
Gopi

Impdp specific schema from dump which has been created using full=y

Hi,
I have received a dump (expdp) which has been created using the parameter FULL=Y. I just want to import (impdp) only one schema into my database. I have used remap_schema and exclude=grants. The schema i want to import is carried out successfully, but in my import log i keep getting the messages such as :
ORA-31684: Object type TABLESPACE:"TS_BCST1" already exists
ORA-31684: Object type USER:"OUTLN" already exists
ORA-31684: Object type SEQUENCE:"SYSTEM"."MVIEW$_ADVSEQ_GENERIC" already exists
How can i use impdp only to import objects under my specific schema and not have impdp attempt to create system/sys users and its objects, create tablespaces, etc etc.
Kindly assist.
Regards,
Karan

Use SCHEMAS parameter in the impdp command to import the scpecific schema.
Eg.
impdp system/password schemas=user1 remap_schema=user1:user2 directory=dir dumpfile=user1.dmp...........
You can specify list of schemas you want to import with , (comma) saperated in the SCHEMAS parameter.

How to pull a list of materials which has obolete status set, from 2years.

Hi All,
I need to pull a list a of materials which has MM-PP status = 04(marc-mmsta) set on them for the past 2 years.
i tried fetching this in MARC table but the problem here is, the users have not maintained any date in the Valid from date field(marc-mmstd) for any of the materials, so i cannot find out when exactly the status was set to 04.
i tried my luck in the table CDHDR but here, i cant find the changes done, for a particular field.
is there a table where in i can see the changes done to a particular field(say marc-mmsta) so that i can track when exactly the status was set to 04 in the material master and pull in the materials that has 04 status on them for the past 2 years?
Thanks
Mahendra

all changes are stored in CDHDR and CDPOS.
CDHDR has the header information, e.g. user who made the change and when he did it. The CDPOS has the info about the content of change.

How to Set JMS property and Read JMS property in BPEL using JMS adapter

Does any one know how to set or read more than one JMS property in BPEL using JMS adapter. My queue server is Oracle JMS server.
Any help and sample is well appreciated

Hi Van
I have noted that only the attribute "type" is missing. It seems that when you create a "string" property, the attribute "type" is droped from the XML. If you use another type (as "integer" or "double") it stays there.
If you try to read your properties, except for the "type" attribute, you should be successful, as I am. If you need, please tell me your email, I can send you my code.
Source Code:
in ASSIGN activity (process which SENDS the JMS message):
<assign name="TESTES">
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@type"/>
</copy>
<copy>
     <from expression="'name'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@name"/>
</copy>
<copy>
     <from expression="'value1'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@value"/>
</copy>
<bpelx:append>
     <bpelx:from>
     <Property name="" type="" value=""
          xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/"/>
     </bpelx:from>
     <bpelx:to variable="HeaderJms" part="outboundHeader"
          query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties"/>
</bpelx:append>
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@type"/>
</copy>
<copy>
     <from expression="'name2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@name"/>
</copy>
<copy>
     <from expression="'value2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@value"/>
</copy>
</assign>
in ASSIGN activity (process which READS the JMS message)
<assign name="Assign_1">
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@value"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@value"/>
<to variable="temp"/>
</copy>
</assign>
Note that I do not try to read the "type" attribute, otherwise it will fail.
Here is the JMS Header Message received:
<inboundHeader>
<JMSInboundHeadersAndProperties xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/">
<JMSInboundHeaders>
<JMSCorrelationID>
bpel://localhost/pi_lms-c001e/BpelPiAtualizacaoC001E~1.0/3200025-BpInv0-BpSeq1.6-2
</JMSCorrelationID>
<JMSDeliveryMode>2</JMSDeliveryMode>
<JMSExpiration>0</JMSExpiration>
<JMSMessageID>ID:467DFA1FA1ED459EBF37F51F596C3F12</JMSMessageID>
<JMSPriority>4</JMSPriority>
<JMSRedelivered>false</JMSRedelivered>
<JMSType>com.mercurio.lms.integration.c001eip.c001EIntegrationPoint</JMSType>
<JMSTimestamp>1201552046253</JMSTimestamp>
</JMSInboundHeaders>
- <JMSInboundProperties>
<Property name="JMSXDeliveryCount" type="integer" value="1"/>
<Property name="JMSXRecvTimestamp" type="long" value="1201552046698"/>
<Property name="JMSXUserID" value="lms_dev_int_v1_user"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="JMS_OracleDelay" type="long" value="0"/>
<Property name="JMSXState" type="integer" value="0"/>
<Property name="IAS_VERSION" value="10.1.3"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="name" value="value1"/> ("type" attribute was droped!!!)
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="name2" value="value2"/> ("type" attribute was droped!!!)
</JMSInboundProperties>
</JMSInboundHeadersAndProperties>
</inboundHeader>
Regards
Marcelo

How to set printer options when direct printing from Linux AS Sevr.?

We have a problem like this: Our app server is a 10g R2. We want to DIRECTLY print reports to a HP LaserJet 1320 PCL 6 which is attached to a Windows print server.
We can print the reports from the Oracle Forms (we use reports builder to create a PDF in a directory and then using HOST command we print it).
The command we use is lp -d LaserJet sicl_rcpdebtnt_5.pdfProblem is the printout comes with the top 10% of the page not printed. i.e. the printing starts from about 10% of the PDF. The header and top information is not printed.
We tried the scaling option: lp -o scaling=75 -d LaserJet sicl_rcpdebtnt_5.pdfBut that also has no effect.
What can we do to print the entire PDF in ONE page. When we open the PDF in Windows and prints it we have to say Fit to printer margins for the printer's page scaling property.
How to set this in command line Linux???

Since you are not printing directly from Reports (destype=printer) this is not really a Reports issue I guess. Maybe you should ask this in a Linux forum.
However:
we have to say Fit to printer margins looks to me that there is a mismatch between your Report design and paper format. Check page size and margins in Reports Builder.

How to set up FSCM 9.0 Application for Customers to use ?

Folks,
Hello. I have just installed FSCM 9.0 ( all of its modules) and run the application in Browser successfully. The Database is a clean System Database without any Demo data (Production Database).
In order for Customers to type in their data into the application, we need to set up CharFiled, SpeedType, SetID, common data in Controls Tables in the Database. In Menu, there is "Setup Financial/Supply Chain", and under PeopleTools, there is "Setup Manager". But I don't understand where to start to set up the application FSCM 9.0 application.
Do any folks understand the procedure to set up FSCM 9.0 application for Customers to use step by step ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed FSCM 9.0 all of 50 modules. I just want to implement General Ledger module. Thus, I create a project named "General Ledger" in Setup Manager under PeopleTools as follows:
PeopleTools -> Setup Manager -> Manage Implementation Project -> Create New Project by Product -> select "General Ledger" ->View Summary -> Save -> Type in "General Ledger" in Project Name Box -> Click ok -> click "generate setup tasks" -> click "setup task generation status"
It has been for a long time, I still see "Run Status" is always "Queued". The button "View Setup Task" does not become clear. This means the process is not completed.
Do we need to configure Process Scheduler at first before run Setup Manager ? If yes, how to configure Process Scheduler for Setup Manager to generate a list of setup tasks of a project ?
Thanks.

How to undo an order of transport which has returned an error code 8

Hi experts,
While transporting an installation of business content, it has removed a lot of transfert rules. Could you tell me how to undo this transport from quality to the production envirenenmet. Unfortunately I dident check the transport order which has returned the code error 8.
Thank you for your answer.
Regards.

Hi Joseph,
Transport all the objects you want in the order again with a new request. This will replace all the transported objects and you will get all the objects transported.
Regards,
KK.

How to set IPaddress to a VM which has Linux OS using powershell remoting.

Similar Messages

Maybe you are looking for