How to set it so voice recordings aren't interrupted by incoming calls

So, recently when I've been recording with the voice memos, and a text or an incoming call comes in, it INTERRUPTS THE VOICE RECORDING.  Why would I possibly WANT this, Steve Jobs?
The other day, I was recording a performance I was doing on stage.  I got a text from a friend saying "I'm not going to make it to your performance.  Sorry."  And my recording was interrupted.  Of course, I didn't notice until I got down off the stage.  Big dissapointment. 
Is there a simple preference to be set for, like, "Don't let voice memos get interrupted"?  Check!
Thanks for your help

Battletard wrote:
INTERRUPTS THE VOICE RECORDING.  Why would I possibly WANT this, Steve Jobs?
Steve doesn't make the iPhone himself.
Nor is he in the user forum.... well he could be but I haven't seen him.
The reason it interrupts is because the iPhone is a phone.
And the main function is .... a phone.
Anything phone related pops in front of any other app.
So as gdgmacguy suggest, if you want to turn off phone features for a while the activate Airplane mode.
Which would probably be also the correct setting if your phone is where there is a performance.
Have some respect for the other performers; you would be unhappy if someone got a call during your performance right?

Similar Messages

  • HT1413 how to set the ringer to flash the camera flash for incoming calls

    I have seen other iphone 4 have their riinger set up to flash the camera flash for incoming calls. I have not been successful to figure it out from the settings feature. does anyone know how to do this?

    Hi jdflo50,
    The feature you are talking about was introduced in iOS 5 Software Update v1.0:
    http://support.apple.com/kb/DL1456
    Accessibility improvements
    Option to light LED flash on incoming calls and alerts for iPhone 4S and iPhone 4
    Settings > General > Assessibility > LED Flash for Alerts
    Hope this helps!
    - Judy

  • How to set a cookie in the browser from an html page called via an Iview

    How to set a cookie in the browser from an html page called via an Iview
    Hello all,
    I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
    Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
    Is there a way to allow cookies to be set from an embedded page in a url iview??
    You will make my day if you know!
    System: EP7 SP13
    Kind regards
    Alex

    Hi,
    Check this:
    http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
    Cookie Basics
    Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
    These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
    For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
    Regards,
    Praveen Gudapati

  • IPhone Voice Memos Interrupted By Incoming Calls

    I notice that every time I use my Voice Memos software on the 3G(s), if an call comes in, the Voice Memo stops recording and I won't know it till I look at the phone later. Is there ANY way to stop that for that not to happen and you can have perhaps the calls go directly into voice mail so that the Voice Memo feature doesn't get interrupted? It's useless to me otherwise.
    Thanks for anyone's input!

    The voice recorder application - just like every other iPhone application, native or 3rd party - will shut down when you receive a phone call. The iPhone operates under the assumption that the device is first and foremost a telephone.
    As far as work arounds go, you can always put the phone in airplane mode when you need to use the voice recorder app uninterrupted. This will send all incoming calls directly to voicemail.
    Message was edited by: Ansuz82

  • How to set up free voice calling

    This will work for any wifi/data enabled device- regardless of whether it is an android smartphone without current service, or a  wifi/3g/4g tablet
    I currently enjoy free local/long distance calling on my Xoom, and I use the Motorola H730 bluetooth headset. very nice.
    what is needed:
    1. download Groove Ip
    2. download Google Voice app (for sms texting/voicemail)
    3. (recommended) bluetooth headset
    then go to Google Voice website, get a free number ( do not port your current Verizon data number!)
    then forward Google Voice calls to your tablet's Google Talk via the settings on Google Voice.
    log into your Google account via Groove Ip app, punch in your new number.
    Configure, and tweak:
    Audio/Echo Settings>Basic Echo Canceler
    Troubleshooting>Synchronize Voice
    Troubleshooting>Mic Source>Android Default
    Allow 3g/4g calling
    Accept calls on answer
    Message was edited by: rive

    Hey there,
    First you will need this information to update the registration buy form:
    http://kb.worldsecuresystems.com/893/bc_893.html
    To show hide things based on the options if the form has not been overly modified BC by default hides the CC fields if thats not selected with its own javascript. If a template etc has made changes to that then you need to add you own javascript in for those behaviors.

  • How do I download notes/voice recordings/music files to a NEW computer / NEW Itunes?

    I got a new computer and my old one is already sold. I have all my music etc. on my ipod touch and I want to download it to the new computer. I already downloaded a new Itunes but I don't know what to do next. Anyone an idea?

    Seee:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    For transfering iTunes purchases:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases

  • UC320: how to set (correct) time and date, upload own AA messages, get caller ID, telnet?

    Hello there,
    Just trying out the UC320 I got borrowed from Cisco AT for testing with firmware 2.1.2 (1) localized for Austria.
    The device is connected to the cable modem of my ISP (Kabelsignal) utilizing two FXO ports, getting an IP address from my DHCP being connected to a WS-C2960G-24TD (LAN 1@UC320 connected to Gi0/18@C2960G port macro Cisco Switch enabled).
    Now I would like to try/see the following features:
    - a correct time and date: huh? hwo/where???
    No option to set this right??? No NTP option??? Am I just blind or too stupid to find that option/s?
    - upload own messages for the AA: ok, there are german messages but someone might have a little bit personalized ones - maybe telling callers the company name before asking them to dial the extension if they know it. Making custom messages is not the problem - but how to upload and in which sound/data format?
    - caller ID: my ISP told me that he transfers the caller ID correctly to analoge end devices if caller ID is available and not suppressed. All I can see when a call comes in is which FXO Port is being used by that call. So callback entries on the SPA phone is senseless. Any advise?
    - CLI: You can telnet the device - but which credentials to use to successfully logon? The pre-assigned credentials form Cisco AT are not accepted for logon.
    BTW @Cisco guys: I am also voting for support for the older SPAs (e.g. 942)

    Hi Claus,
    Thanks for giving the UC320W a spin and glad you found the support community!  Let met see if I can help answer your questions....
    Time/Date & NTP -- The UC320W is preconfigured with Cisco's Small Business NTP server.  The preferred method for correct time you will need the UC320W WAN to be connected with Internet access.   If there is no WAN connectivity there is a feature in the 2.1.x firmware where you can set the time on a SPA phone GUI and it will then update the system time.  Alternatively, if you have a LAN side NTP server that is on the same subnet as your Data VLAN subnet, you can use the NTP.pmf file found here:  https://supportforums.cisco.com/docs/DOC-16301
    Upload custom Music on Hold and Auto Attendant prompt files.  We are currently in beta of a new Cloud service.  To participate in the Beta, please send an e-mail to [email protected] requesting MoH/AA Custom files Cloud Beta participation.
    Caller ID on FXO:  Make sure that you have run the impedance matching tool on each of your FXO ports.  For additional information on running the Impedance Matching tool and Caller ID troubleshooting, please see the UC320W Troubleshooting Guide.
    CLI access -- This is for Cisco Support personnel only for low level debugging.  This is not a IOS based device and there is no command line access for provisioning.
    Cheers,
    Chris

  • How to set a contact's default phone number for Siri to call

    Currently using iOS 8.2:
    I really enjoy using Siri to make hands-free phone calls e.g. "Call Mom."  However, many of my contacts have multiple numbers. For most of my contacts, simply saying "Call Mom" will jump me straight into a phone call to their iPhone or cell phone number; but for a few of my contacts, I'll say "Call my wife" and Siri will reply with: "which phone number should I dial: iPhone, home, work?"  I have tried re-arranging and relabeling numbers in Contacts and I've tried adding specific numbers to my "Favorites" section in the Phone app, but no dice.
    Any help or ideas? There are many postings on this subject dating to 2009 indicating customer preference for a default option. Either it is too difficult for Apple to accomplish or there is some solution which I haven't learned.
    Set default phone number in address book

    Say "call my wife home number."

  • HT1689 how to set up voice mailbox?

    Just bought an i-phone 5 and can't figure out how to set up the voice mailbox.

    Voice mail is a carrier feature. Contact them.

  • How to set the parameter of xi header in server proxy

    Hi,
    Does anyone have idea, how to set ref_to_message_id of a client proxy in the server proxy? My problem is, I send a message to a server proxy. The server proxy receives the message, retrieves the message id and tries to set the ref_to_message_id of the message, which will be sent to a client proxy, with its message id. I only find some useful functions to get these information of client proxy and server proxy like message_id etc. in runtime. But I did not find the "set" function to set these parameters. Maybe someone can tell me at first, if it is possible to set such parameters in runtime in server proxy.
    Can anyone help?
    regard
    hu

    Hi Chilla,
    what I want is to monitor the related message bundle easily. In my server proxy, many different client proxies are called and messages are transfered. So under the SXMB_MONI I will find many message exchanges for one server proxy call. Because the server proxy is called so often, I cannot distinguish under the SXMB_MONI, which message exchanges are caused by which server proxy call.
    So I have an idea. If I can set the ref_to_message_id of the messages for the client proxy calls with the message id of the server proxy call, then I can at first select the message of the server proxy call and find the messages for the related client proxy calls easily using the button "referencing message". The message id of the server proxy call can be retrieved. So my problem is now, how to set the ref_to_message_id of the messages for the client proxy calls with this messag id in the server proxy.
    Of cource, if anyone has better idea, how to resolve the situation in another way without setting the ref_to_message_id, pleases inform me.
    regards
    Bin

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is always talking.  How do I make her voice go away and my IPAD work like it should.

    The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking.  How do I make the voice stop and my IPAD work again. 

    If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
    Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
    The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • How do you get your tunes and voice recordings from your iPod Touch into iTunes on a new computer if you don't have Mobile Me?

    How do you get your tunes and voice recordings from your iPod Touch into iTunes on a new computer if you don't have Mobile Me?
    iTunes on tmy new computer shows none of my data and I fear if I sync my iPod with the computer all will be deleted on the iPod.
    I still have everything in iTunes on the old computer.

    Just move your iTunes library to you new computer.  You can transfer iTunes purchases to you new computer from your iPod by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT1848Make sure you also move the backup.  You an find where the the backup is located here:
    iPhone and iPod touch: About backups
    You can move other items by:
    Best iPod to PC
    After you move you stuff to the new computer, restore the iPod from backup.

  • How do I save voice recordings to my phone sent to me via text messaging?

    I have recieved voice recordings sent to me via text messaging and I would like to save them to my computer. How would one go about this?

    Welcome, glad that answered your issue.

  • HT4061 how do I set up my iPhone5 voice mail. I haven't set up a password, yet it tells me my password is incorrect. I don't know how to set up a password.

    how do I set up my iPhone5 voice mail? I haven't set up a password, yet it tells me my password is incorrect. I don't know how to set up a password.
    I purchased the phone in a retail store a few days ago. Am trying to avoid making an appointment and going back.  The purchase took 3 hours.

    Have you got Settings > General > Restrictions > In-App Purchases set 'off' - that should stop all in-app purchases. And what have you got 'Require Password' set to on the Restrictions screen (I can't remember what version of iOS that setting came in with, so you may not have it) ?

Maybe you are looking for