How to set Jboss Security?

Pls tell me in details or give me an website address.
Thanks in advance!

http://www.javaworld.com/javaworld/jw-08-2001/jw-0831-jaas_p.html

Similar Messages

How to set wsse:security SOAP header in soa 11g?

Hi,
we are facing an issue with invoking a secured webservice.
we tried 3 things
1.) set the username/password in em under reference properties
2.) Created a schema, set the username/password and included it in partner link header tab.
3.) added a client token policy in em and then set http authentication field.
all these not working.
the error we are facing is :
Non Recoverable System Fault :
javax.xml.ws.soap.SOAPFaultException: Missing <wsse:Security> in SOAP Header
complete payload is below:
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>Missing <wsse:Security> in SOAP Header</summary>
</part>
<part name="detail">
<detail>javax.xml.ws.soap.SOAPFaultException: Missing <wsse:Security> in SOAP Header</detail>
</part>
<part name="code">
<code>wsse:InvalidSecurity</code>
</part>
</remoteFault>
</bpelFault>
Please let us know how to proceed with this?
Thanks in advance
Regards

You need to attach the below policy in security section (Select your partnerlink in the references section of composite.xml and the click on "Configure WS policies")
oracle/wss_username_token_client_policy
if it is Secured Webservice, then attach this policy
oracle/wss_username_token_over_ssl_client_policy
After attaching policy, click edit and configure the key(out of box, u see one key csf-key) . This key should be setup with the required username and password that matches with the Webservice expected username and pwd.
Thanks,
Satish
http://soadiscovery.blogspot.com

How to set portal security context for a procedure

Hi, I have procedure that needs to call some of the PDK APIs (WWSBR_API), but outside the scope of the web browser, i.e, automatically via a DBMS_JOB or queue. There is no HTML outputted, but rather a log entry made to a custom table.
The schema that this custom pkg belongs has all the necessary grants made to it from provsyns so that it should run.
How do I programatically set the context of the portal security so as to make the PDK APIs think it has been invoked by a Portal Adminstrator or a user with sufficient privs to perform the actions against the PDK and therefore not bomb out with security exceptions? I have seen this documented quite some time ago, but cannot find the details.
Regards
John

You need to use the wwctx_api.set_context procedure.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk11scp.htm

How to set LSNRCTL security off?

Hi all, can some one tell me how to turn off the security for lsnrctl??
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
Start Date 24-MAR-2008 12:01:07
Uptime 0 days 0 hr. 3 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Thanks.

The listener security has change from previous 9i versions to 10g
In Oracle 10g, the listener now uses local OS authentication. As long as one runs lsnrctl
as the same user as the running listener they will be able to fully administer
it without providing the password.
This security feature is enabled by default and can be identified at listener
startup, or when issuing a LSNRCTL STATUS command, by the following output:
Security ON: Local OS Authentication
If you set a listener password, lsnrctl status command show
Security ON: Password or Local OS Authentication
Message was edited by:
tarrio

HT5622 How to set new security anwser?

Dear Sir or Madam
sorry,i have already forget my security anwser, and didnt set the aid email,now what should i do,how can i reset the new security anwser？

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97886)

Where and how to set a security code for wi-fi connection

I am running OS 10.8.5 on my MacBook Air and have an Apple Wi-Fi personal connection. I havn't needed a security code for my network but we are trying to add a wi-fi connection to our Dish Network Whole Home system which consist of two receivers. In the set-up procedure it asked for a "Security Key" and we don't have one. I cannot find anything that will work in this step and it will not connect w/o one. I do not how to do this nor can I find an area for this option. Can anyone tell me how to do this ? The Dish Network "connection kit" is set up for wireless. I have tried the #'s on the modem itself and various others I found in the system preferences under wi-fi. I am at a complete loss here !!!!!!
Thank you in advance for your help b/c I KNOW there is someone out there that knows how to do this. And....it likely is a very easy thing to do - just not me !!

Contact Dish technical support since it is their product.

How to set user security on dimension levels?

Hi, there. I am considering setting use access right to specific levels on the branch dimension.
Suppose there are four companies on level 1 of the branch dimension. I would like to limit users only access their own company.
How should it be done in share service? Thanks.

Thanks both.
However, I encountered another problem. After created users in shared service, I could not see it in
application even after refresh secutiry.
Another problem is that I could not apply filters by Essbase administration console. The Edit User/Group access function is disabled.
Therefore, even I selected a user I could not apply the filter. Does anyone know how to enable the function?
Thanks in advance.

How to set up security to disable router

I had a Geeksquad install my security in router but unfortunately by no apparent reason it was disable .
Can you please help how to activate it ?WRTG5 router
Thanks.

Hi…logon to router’s setup page, open I.E. on computer and in the address bar type 192.168.1.1 it would ask you for username and password, put “admin” (default password for router) as password without any username, linksys setup page would pops up…click on wireless tab>> wireless security >> setup WEP or WPA select any of these security and save the settings.

How to set wireless security for Officejet Pro L7750 printer?

Hi there.
I connected Officejet Pro L7750 to wireless broadband router and all is well. Only problem is that all computers on the network can install the drivers and connect to the printer. How do I limit the printing capabilities only to 2 computers so the rest of the network won't be able to print to this printer?

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

How to set up secure chat?

I have the app loaded but can add buddies.

Are you referring to Secure Chat for Facebook? If yes you need to contact Ultiapp, LLC for support. You did notice the 1 star ratings?

How to set security type for lenovo working with hotspot?

How to set wireless security type for lenovo laptop working with hotspot?
Since I can connect with the other laptops except this brand.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

How to set JMS clients to use JVM Invocation layer

Hi,
I'm not sure if this JBoss specific (but I'm assuming it's not) so I'll be asking it here. How can I set my JMS clients and Message-Driven Beans to use JVM Invocation layer since the clients and queues will reside in the same JVM.
Thanks in advance.

May be that explains why I couldn't successfully integrate ActiveMQ with JBoss. I was using the 3.0 version. I'll try again once I find the time.
Anyway, do you know how to set JBoss JMS clients and MDBs to use JVM invocation or transport layer instead of UIL2?
I'm not sure if what I've done is correct But here's what I've done.
For jvm-il-service.xml, I changed the JNDI reference from "ConnectionFactory" to "JVMILConnectionFactory" since the default service uses "ConnectionFactory". Then I used that reference as my JNDI look up in my JMS client. I'm just not sure how to do this with MDBs. I think I should add an entry in the ejb descriptor file but I need someone to confirm.
Thanks.

I cannot set new security manager.

How to set new security manager if there is one that is installed. It always raises an exception.

this is not really a JMS question.
anyway - you can't change a SecurityManager after it has been instatiated. what you can do is run the JVM with the -Dsecuritymanager= propert.y

Setting up Secure connection with DB2 database on IBM iSeries

We have requirement to setup Secure connection with DB2 database on IBM iseries system. currently we are using ODBC type of connectivity which is not secure. Can anyone help how to set up Secure connectivity. below are the system details . . Application - IDQ - 9.6.0 Database - DB2 on IBM iSeries AS400

We have requirement to setup Secure connection with DB2 database on IBM iseries system. currently we are using ODBC type of connectivity which is not secure. Can anyone help how to set up Secure connectivity. below are the system details . . Application - IDQ - 9.6.0 Database - DB2 on IBM iSeries AS400

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

How to set Jboss Security?

Similar Messages

Maybe you are looking for