How to set line thickness in line chart?

There's really no upper bound on how many series might be displayed on my graph, but say I'm graphing 52 series.
Is there a way to set the thickness of the lines without generating a graph of 52 things and settting the thicknesses individually?
What I'm doing now: preview the report with parameter that will make for a lot of series. Then click each series, set the width, then when done tell it to apply the customization to all graphs. Is there a speedier way?
Thanks

Sorry for re-surrecting this old thread, I could not find anything mroe recent on this topic. If I have 4 data series, I can easily change the line and marker format for each series in the Design window. My chart however has 6 series. How do I format the line and markers of the 5th and 6th series? It appears that any changes that I make in the Preview window, is not carried over to the Design window, and regardless of how many data series there are, the standard 4 are all that is displayed in the Design window. (I am also using Crystal XI)
Edited by: VanWykie on Mar 30, 2010 2:15 PM
Edited by: VanWykie on Mar 30, 2010 2:16 PM

Similar Messages

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

How to set line width using CoreGraphics ?

Hi guys.
I trying draw line with 2 pixels width.
How to set line width on CoreGraphics ?
AFAIK, OpenGLES.framework has method like this :
glLineWidth(2.0);
Is it possible for CoreGraphics ?
Thanks in advance.

See CGContextSetLineWidth in the CGContextReference.
You might also want to look over Painting a Path in the +Quartz 2D Programming Guide+.
\- Ray

VSTO: How to set line break in Ribbon Xml?

Hi All,
I have a button in Ribbon.xml. it looks like:
<group label="myLabel" id="View">
<checkBox id="cbView" label="ViewViewviewviewview" getPressed="cbView_Pressed"/>
</group>
The result is shown as:
The checkbox is too long. My question is : How to set line break in checkbox's label.
Thanks a lot,
By the way, in Ribbon Xml. How to add RadioButton?

Hello Ricky,
The Fluent UI (aka Ribbon UI) doesn't provide any attribute or callback for that. You can try to use an escape sequence "\n\r", but I am not sure whether it helps. Also you may consider placing a text block below the check box control.
You can read more about the Ribbon UI in the following series of articles:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

How to create line chart

Hii Experts,
How to create line chart?
I want to prepaire a line chart in a report. i have 1 table. In a table have 2 fields. chart is created in these 2 field refrence how It's possible?
Thanx in Advance
Regards
Vshal

I found it very easy to produce a line chart in a window container using FM GFW_PRES_SHOW. In my case this produces a basic line graph with three lines across 15 time periods.
See transaction GRAL for various chart types...they're relatively easy to produce... I picked DEMO_GFW_PRES_SHOW report program from GRAL as my example for how to produce a simple line chart very quickly.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

ALV Graphs: How to set line type graph as default graph

Hi All,
I need to develop a line graph. The fields on the X-axis will change dynamically. Some times they may be 10 field and some times they may be more than 100 fields. I tried with Function Module GFW_PRES_SHOW_MULT. But I can only display maximum 32 fields. Can anyone tell me exact program which helps me to full fill my requirement. It will be a great help if you could told how do display line type graph as default graph in ALV. In REUSE_ALV_GRID_DISPLAY there is a Exporting parameter MT_CHART_TYPES but this help you only to enter description for X-axis and Y-axis.
Many thanks in advance.

I would call GRAPH_MATRIX_2D with options depending on representation you wish
look at the program GRBUSG_1 to see how to use it
there you have some options to display bar chart, but you could use other values (complete list of options is available in documentation of function module GRAPH_MATRIX_2D - click on parameter OPTS in help display to see full explanation)
exemple:
P2TYPE = LN to display lines

How to dispaly Line chart in output?

Hi All,
My requirement is that I want to display a line graph for 'year vs revenue' after calculation of revenue.
I tried this with the FM GRAPH_2D . It displays only bar chart initially, for getting Line chart I have to choose it manually in options after displaying it, but I want to display the line graph directly without any manual operation.
I've used the FM as below,
CALL FUNCTION 'GRAPH_2D'
EXPORTING
    inform             = 'X'
*    display_type       = ''
    titl               = 'Year Vs Revenue'
TABLES
    data               = it_summary
EXCEPTIONS
    gui_refuse_graphic = 1
    OTHERS             = 2.
Please let me know how to get the line chart directly using either FM GRAPH_2D or any other FM if you know that could do this.

Hi,
try this:
DATA: BEGIN OF IGRAPH OCCURS 0,
        TXT   TYPE CHAR10,
        VALUE TYPE P,
      END   OF IGRAPH.
DATA: TITLE(80) VALUE 'Header'.
IGRAPH-TXT = '2000'. IGRAPH-VALUE = 10. APPEND IGRAPH.
IGRAPH-TXT = '2001'. IGRAPH-VALUE = 23. APPEND IGRAPH.
IGRAPH-TXT = '2002'. IGRAPH-VALUE = 06. APPEND IGRAPH.
IGRAPH-TXT = '2003'. IGRAPH-VALUE = 34. APPEND IGRAPH.
IGRAPH-TXT = '2004'. IGRAPH-VALUE = 45. APPEND IGRAPH.
IGRAPH-TXT = '2005'. IGRAPH-VALUE = 66. APPEND IGRAPH.
IGRAPH-TXT = '2006'. IGRAPH-VALUE = 15. APPEND IGRAPH.
IGRAPH-TXT = '2007'. IGRAPH-VALUE = 17. APPEND IGRAPH.
IGRAPH-TXT = '2008'. IGRAPH-VALUE = 30. APPEND IGRAPH.
CALL FUNCTION 'GRAPH_2D'
EXPORTING
    TITL   = TITLE
    VALT   = 'Value in EUR'
    WINSZX = '75'
    WINSZY = '75'
TABLES
    DATA   = IGRAPH.
CALL FUNCTION 'GRAPH_2D'
EXPORTING
    TITL   = TITLE
    VALT   = 'Value in EUR'
    WINSZX = '75'
    WINSZY = '75'
    DISPLAY_TYPE = 'LN'
TABLES
    DATA   = IGRAPH.
CALL FUNCTION 'GRAPH_2D'
EXPORTING
    TITL   = TITLE
    VALT   = 'Value in EUR'
    WINSZX = '75'
    WINSZY = '75'
    DISPLAY_TYPE = 'ST'
TABLES
    DATA   = IGRAPH.
and look in the Docu of this FM (Field DISPLAY_TYPE)
Regards, Dieter

How to set line break points in JSF Facelets files on NetBeans?

I am running debugger on NetBeans. I can set line break points for jsp files but cannot for Facelets files with extension 'xhtml'. Dose anybody know how to set break points for Facelets xhtml files? Or is it possible to set break points for xhtml filles?
Thank you very much.

You can't. They aren't executable code, they are templates. The only executable code is the part inside #{}.

How to set line style to be underline for links using PDLinkAnnotSetBorder

Hello,
I want to set link line style to be underline. am not finding any difference for solid and underline except cosname of S (BS) is U or S
Please anyone tells me how to change the link line style to be underline.
Thanks,
Sow

Thanks for reply.
I am using code as show below to change line style to solid and dashed.
PDLinkAnnotBorder pdLinkBorder;
PDLinkAnnotGetBorder( rpdAnnot, &pdLinkBorder);
//For solid
pdLinkBorder.dashArrayLen = 0;
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
//For dashed
pdLinkBorder.dashArrayLen = 1;
for( int iIndex = 0; iIndex < PDAnnotMaxDashes; iIndex++)
{ ASInt32 iThickness = 3;
pdLinkBorder.dashArray[iIndex] = Int32ToFixed( iThickness );
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
how should I do for underline. If am using cosobject how to change line style to underline using cosobject
Please let me know.
Thanks,
Sow

How to plot line chart for huge xml files?

Guys,
I would like to plot files over 2000 lines in a line chart!
but the application is getting very slow!
does anyone have any tips to improve performance?

Can we see how you implement the LineChart and bind the XML please?
It should be fast normally.

How to generate line chart (e.g. stock market) in midlet?

how to write such a line chart in midlet? any tutorial recommended?
thanks a lot.

Well, I would draw it myself. I think that's your only option. If you are not familiar with MIDP, then you should start with a beginner tutorial - it will not have anything to do with graphics, but more importantly it will introduce you to the programming model. You'll need the experience when you grapple with graphics. Not a big deal, but I haven't seen any samples for it, so you'll have to work off of the API docs. A nice page with sample programs:
http://wireless.java.sun.com/midp/samples/
If you are familiar with MIDP programming, or when you are, then hop over to the API and you'll find what you need there. Some simple math and some custom graphic routines/classes and you'll be well on your way. Here's the API location for the graphics class in the MIDP API:
java.lang.Object
|
--javax.microedition.lcdui.Graphics
Good luck. Hope this helped.

How to make line chart start at y-axis?

How do you make the series on a line chart start at the y-axis? I tried adding a data point for y(x=0), but the Xcelsius graph drops it and starts with y(x=1). How do I fix that? This is especially important for series that need to start at zero.

Post Author: amr_foci
CA Forum: Xcelsius and Live Office
its all based on ur design of your Excel sheet
design how it will be in Excel first
then go to xeclsius
,,, by the way it looks very easy task
you can do it.

How to customize line chart series and symbols?

Hello Forum,
who can help me to customize line chart series and symbols color?
I need to customize this in dynamic way.
Thanks in advanced.

See example 8-10 (Example 8-10 Changing Chart Symbol Color) from http://docs.oracle.com/javafx/2.0/charts/css-styles.htm#CIHGIAGE (reproduced here).
The linked tutorial document contains a picture of how this example renders.
.chart-series-line {
    -fx-stroke-width: 2px;
    -fx-effect: null;
.default-color0.chart-series-line { -fx-stroke: #e9967a; }
.default-color1.chart-series-line { -fx-stroke: #f0e68c; }
.default-color2.chart-series-line { -fx-stroke: #dda0dd; }
.default-color0.chart-line-symbol { -fx-background-color: #e9967a, white; }
.default-color1.chart-line-symbol { -fx-background-color: #f0e68c, white; }
.default-color2.chart-line-symbol { -fx-background-color: #dda0dd, white; }Note the two comma separated colors listed for each -fx-background-color for the chart-line-symbol.
The first color is the color or the outside of the symbol, the second is the inside of the symbol.
In the sample css you provided you only supply a single background color for the chart-line-symbol, when two colors are required.

How to draw Line Chart in SAP?

There is a request that the customer want to see Line Chart in the report.
Is it possible to do it using abap?
Thank you very much.

Hi,
Yes it is possible.
GOto Tcode SE83>Expand graphics node>double click on that
you will get all graphic programs.

How to set line thickness in line chart?

Similar Messages

Maybe you are looking for