How to set Lion built-in FTP Server auto run off

Hello all.
I set FTP Server by using Rumpus Server application.
But Lion's built-in FTP Server is running on the front.
So if I try to connect my FTP Server out of my LAN, I can only connect to the built-in FTP Server despite I wanted to connect Rumpus FTP Server.
It can be solved by unload the built-in FTP Server(using sudo -s launchctl unload...) but every after rebooting I should set it because it is set to run automatically in every booting.
How can I set the auto run off?

well, the ftp server (=ftpd) takes account info from the user list for your mac. so, go to the system settings on your mac, then to users, and then just add another user with a password of your choice (tap on the little plus-sign to add a user!). this will then be a valid user for your ftp server after you restart your ftp server.
the other thing you want to do, about the home directory, is called chroot. you can set the home directory of a specific ftp-user to be another directory then the standard. for this, there are configuration directives in the configuration file in /private/etc/ftpd.conf which you have to edit by hand. so make sure what you do there.
you should read this before editing the file, this will give you a better understanding of what to put there: https://developer.apple.com/library/mac/documentation/darwin/reference/manpages/ man8/tnftpd.8.html

Similar Messages

I purchased a second express to use a extender. not sure how to set it up to for airplay to run off of the original air play from 1st express,

need help setting up second express as a range extender for my air play from 1st station which is up stairs and plugged into my home theater?????

I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition. Then connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations EXCEPT as noted on the first graphic below. After confirming that it works, insert your desired administrative and WiFi passwords. AirPlay is a separate selection. Refer to second graphic below.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

How to turn on a WSA S170 built in FTP server ?

Dear support forum members,
I configured Cisco WSA S170 and forgot to turn on the WSA built in FTP server.
I found it when I tried to access WSA logs from Web GUI. May be it is already turned on by default, but WSA blocks access to it.
Could you advise me, how to turn FTP server on or allow access to it from Web GUI or CLI.
I could not find any information about it in documentation.
Thanks in advance!
Best regards,
Alexander.
P.S. Sorry for my English

Hi,
Try the "ifconfig" command. When you select the interface and click on edit, it should ask you:
Do you want to enable FTP on this interface? [Y]>
Do you want to enable SSH on this interface? [Y]>
Which port do you want to use for SSH?
[22]>...
Regards,
Kush

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How do set operation timeout in tomcat server?

hi all
suppose i have one endless loop program(jsp) that program run under tomcat server,
so it's keep on runing in tomcat server.
i want, after some time the server send error message like operation timeout.
how do set operation timeout in tomcat server?
if anybody know help me.
my mail id [email protected]

Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

TS1574 How do set my Built-in microphone to default?

I am using a OS X Version 10.9.1 and i want to know how to set my Built-in Microphone to Default it's a simple question and no one seems to have an answer

Ok i can hear my voice now but the settings for the Built-in Microphone are not the same as before

How to set up the "incoming Mail server" for google apss account

how to set up the "incoming Mail server" for google apss account

The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server. You'll have to ask them about it.

How does one install a express sql server to run with Visual Web Developer 2008?

I successfully installed .NET framework v 3.5 and VWD 2008 on a new Vista laptop. When I want to add a Sql Server database to a website, errors tell me to install SS 2005 Express. MSDN SS 2005 Express download tells me I MUST first install .NET framework v 2.0 before SS 2005. When I try to install framework v 2.0, I'm sent to v. 3.5 and no way to download SS 2005.
How does one install a express sql server to run with Visual Web Developer 2008?

Momark,
Do you still need help with this?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How to set IIS for Applet making it can run at any IE client.

I made an applet with java. It works fine under JDK.
After that, I made a web page with the applet embedded in.
But it can only run on those client computers if the computers has installed JDK.
Could you tell me how to set IIS so that my applet can run on all the client computers no matter whether they have JDK installed or not?

It would have nothing to do with IIS. Your applet apparently requires a "newer" version of Java than what comes with the browser by default. So either make your applet comply with the lowest common denominator (no Swing classes, only AWT, for example), or require your clients to install the newer Java plugin.

How to set up my mac mini server to use two drives seamlessly?

I have a mid 2010 mac mini server, with OSX Lion installed. It has dual 500gb hard drives.
I've been moving all my important files to it, and I've always assumed that once I filled one disc, it would seamlessly transfer over to the other and continue backing up. This does not seem to be the case.
I'm at roughly 495gb of data, and when I try to move a 10gb file onto my server, it tells me that I don't have enough disc space to continue the operation.
What can I do to make use of both drives?
-Thanks

It sounds like what you're asking for is to have the two drives in a RAID 0, where the two 500 Gb drives look like a single 1 Tb drive. I'm not sure the exact procedure for installing RAID 0 on a mini's internal drives, but the process would involve backing up, reconfiguring for RAID (which destroys all data,) restoring data from the backup, and more risk than I would personally find acceptable. I'd expect to lose a full day with the backup and restore steps. I can guarantee, there will be pain.
Instead, I'd suggest looking at what's consuming the 500Gb, and seeing if there are particular folders that can be moved. For example, a shared folder is pretty easy. Copy it over. In file sharing setup, edit the share to point to the new location. Make sure remote users disconnect, and reconnect to the "new" share. When you're happy there is no data loss, delete the old location.
User's home directories can also move, but the process has a few more steps, and depends on how the accounts are built (local vs. OD)
If the majority of the data is in a single "your backup files" folder, shared or otherwise, then I would just set up a second folder on the second drive and write to it, leaving the first alone. If it is truly a backup, then you could make the first folder read-only at this point for extra protection. If you go the 2 folder route, keep in mind your boot drive is operating with 1% free space, I like my drives to have at least 15% free, and OS drives more like 25% (you'll find some range in recommended %-free, but most will agree 1% is too little) so move SOME stuff to the new folder, before closing the old.

Setting up a local ftp server for wireless photo transfers

I am a semi-professional photographer who recently purchased a wireless unit that connects to my camera to transfer my images to my Mac. I have turned on the ftp services under Sharing on my Powermac G5 and set up a user account for the camera to log into. All of the transfers will be on the local side of my router, no outside (Internet) connections.
I can get an IP address for the camera, so I know the connection to the router is ok, however I can not log into the user account on the G5 when ftp is initiated. I keep getting a 'Not Connected to Server' error message.
The connection software on the camera is rather basic. It is ftp only. Do I need to do anything else on my G5 or router to help this along? In the camera, I can specify the IP address of the local ftp server, the account username, and password. Do I need to use passive mode?
Should I use another ftp server program other than the one built into Tiger? The camera company recommends a product called Rumpus, but it is very expensive for my use. Any other suggestions for server software?
Also, is there a way in Tiger to see who is currently logged into user accounts?
Lots of questions, but I am determined to get this to work for me.
Thanks.
Jeff W.

Also, is there a way in Tiger to see who is currently logged into user accounts?
In Terminal just type 'last'. More ways to tell...
http://www.osxfaq.com/tips/unix-tricks/week95/friday.ws
I wonder if ftp might not mean some other file transer protocol like SMB... don't know for sure, but most use FAT16/32, which would need SMB I think.
Try from the Finder... CMD+k, then type in smb://, then the IP of the Camera... or maybe ftp:// plus the IP.
Most ftp programs are more funtional than the built in one... Cyberduck is popular, though I use TransmitX

How to archive files in another ftp server?

Hi,gurus:
   My scenario is file to file and my sender adapter is ftp adapter.
   Now I want to archive the send file in another ftp server,how can I implement it?
   There is a parameter "Archive files on FTP server" when I choose the processing mode "archive".What's it's use？Thanks in advance.

Hi,Santhosh:
Thanks for your reply.
I have checked your blog before,and it is very useful for me.
I still have a problem about command line.
In an sap note,I found the principle of the execution of the command line is like below code:
import java.util.*;
import java.io.*;
public class test {
public static void main(String args[]) {
try {
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("C:/data/test.bat <param1> <param2>");
} catch (Exception e) {
e.printStackTrace();
But you know this method has restriction.If my bat file has many commands,it only execute a part of commands(sometimes 8,sometimes 9 ).
My bat file is like below:
echo open 192.168.67.149 >c:
data
copyResult.txt
echo <username> >>c:
data
copyResult.txt
echo <password> >>c:
data
copyResult.txt
echo cd /receive>>c:
data
copyResult.txt
echo get %2>>c:
data
copyResult.txt
echo cd /ok>>c:
data
copyResult.txt
echo put %2>>c:
data
copyResult.txt
echo cd /archive>>c:
data
copyResult.txt
echo delete send.txt>>c:
data
copyResult.txt
echo quit >>c:
data
copyResult.txt
ftp -s:c:
data
copyResult.txt
del %2
I wanna merge all the "echo" in one command,so it may execute successfully,but I don't know the method.Any ideas?

How to set the CLASSPATH in Unix Server

Hi, everyone~
Do anyone noe how to set the CLASSPATH in the hp-ux server? I tried the setenv CLASSPATH, but not working.. I think should use export. But my jsp pages still cannot working, dunnoe y?
I wonder is the hp-ux support jsp and servlet or not?
In order to let the jsp and servlet to run properly in the unix server, what kinds of steps should taken ?
Hope somemore who experience with this situation b4 can give me some guidance.. Thanks~~
regards,
tzeyik

Tomcat ignores any and all CLASSPATH environment variables. Even if you could figure out how to set it, Tomcat wouldn't use it.
Better to learn how Tomcat's CLASSPATH works and how to deploy Web apps properly. - MOD

How to Set "delete from hub and server" for each account

How can I set "delete from hub and server" differently for each account?
I have 3 emails (2 shared, 1 personal).
the personal is a 'hotmail' account which has device set to 'sync email', 'push', and 'Use SSL'.
it will only sync one way (from desktop to device).
I cannot set the global setting on the device to "delete from Hub and server" without affecting all accounts.
I do not want to have to confirm delete on every item.
previous to the 10.3 update this was not an issue.
am i missing something? or is this another step backwards?

The only other way would be to set it to prompt every time you get an email. Yeah, I know that defeats the purpose.. I guess in this aspect it is a step back

How to set sap directories for FTP via TCode:AL11?

Hi, all
I want transfer data from a FTP server to BW. With TCode AL11 I setup SAP directory for FTP, format as following:
Z_MYDIR ftp://user:[email protected]
ftp://10.5.1.21 is the main directory in my FTP server.
but when I double click the row of the above, error occoured as the following:
Wrong order of calls <- CALL opendir(,,..)
I want to ask how to setup the ftp directory in sap al11, and why the error occoured.
Thank you very much.
Jiande Ding
Edited by: Jiande Ding on Dec 3, 2008 9:24 AM
Edited by: Jiande Ding on Dec 3, 2008 9:49 AM

Hi,
As i know there is no possibility if alphanumeric number range in sap.You check with any exit before updating the no in database.check this and post .
Regards,
Madhu.

How to set Lion built-in FTP Server auto run off

Similar Messages

Maybe you are looking for