How to set long exposure times on a Powershot sd800?

Is there a way to set long exposure times on a Powershot SD800 camera? Am I limited to what the preset menus offer?

zoltanszucs,
You can try shooting in the Long Shutter Mode. Please follow these steps:
With the camera in Manual mode, you will need to go into the menu and enable Long Shutter.
Exit the menu and press the FUNC button.
Select the Exposure Compensation setting and press the MENU button.
Use the LEFT and RIGHT buttons to select the shutter speed.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

How to set the exposure time and the gain of a connected camera with IMAQ USB

A camera was connected to my computer with USB port and we can acquire the image through IMAQ USB. Now we have to set separately the exposure time and the gain with the camera's driver software provided by the manufacturer. My question is: how to set directly the exposure time and the gain of this camera in Labview?

Hi Frank
Welcome to the forum. Have fun
FranklinT wrote:
My question is: how to set directly the exposure time and the gain of this camera in Labview?
I think its not possible for USB Cameras.
Previous threads for your ref
http://forums.ni.com/t5/Machine-Vision/How-to-control-property-nodes-for-USB-camera/td-p/970306
http://forums.ni.com/t5/Machine-Vision/imaq-USB-property-page/td-p/926034
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

Why do I get lots of noise in my photos on the D30 at long exposure times with 100 ISO speed? Help!

So I'm using a Canon D30 (3.1 megapixel). My ISO speed is set to 100, but when take phots at very slow shutter speeds I get a lot of noise. And I mean a lot. Can anybody help?

Long exposure time is the 2nd main way to get noise in an image. Not a lot you can do other than post processing. How long an exposure? Perhaps a compromise like ISO 200 and a shutter that is half as long (twice as fast) would be slightly better if you played around with it. Or perhaps that would be even worse.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

How to Set Automatic Default Time in Calendar

Friends,
When I create new event in calendar (by double clicking on a specific date) for example Group Dinner, the calendar autotatically set the start time at 8PM.
How to set the default time to 7PM for example.
Thanks
Regards,
akostaman

Ok It seems not just a problem of 24 hour time appointments that won't sync but all appointments I make on my iphone in calendar won't sync to calendar on my mac?

How to set long =1000 in a store proc

Hi Friends
Can someone tell me how to set long = 1000 in stored proc and how to get and manipulate returned variable clob in front end ASP
stored proc is as below:
CREATE OR REPLACE Procedure usp_emp_get
(i_Emp IN NUMBER, o_XML OUT CLOB)
AS
qryCtx DBMS_XMLGEN.ctxHandle;
BEGIN
qryCtx := DBMS_XMLGEN.newContext('select * from emp where EmpNo=''' || i_Emp || '''' || ' and rownum <= 100');
DBMS_XMLGEN.setRowSetTag(qryCtx,'empdata');
DBMS_XMLGEN.setRowTag(qryCtx,'emp');
o_XML := DBMS_XMLGEN.getXML(qryCtx);
DBMS_XMLGEN.closeContext(qryCtx);
END usp_emp_get;
So how to process o_XML in frontend side
Thanks Mark for your previous help

You shouldn't need to set long in the proc as such. The SET function is used to control how much data SQL*PLUS displays when processing long data types (LOB, CLOB, XMLTYPE).
You've written a PROC that creates the XML you want. However you probably need to make it a function so you can return the data into your app

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How to set cookie expire time

Hi I'm new to jsp,
please tell anybody, how to set cookie expire time.
I know about setMaxAge(); but my requirement is set the expire time until close the browser or logout.
And one more thing is how to delete cookies while logout.
Thanks in advance
achchayya.

Hey,
I understand what you are trying to say. solution is simple dont set setMaxAge , just create cookie and use it. It will be valid till you close the browser.
Regards,
SRI

How to set the expiry time of an image

how to set the expiry time of an image from within the servlet or jsp

I am sending an image with the page, so the set the page expiry in the browser cache we can use META tags of html or response.setDateHeader to set the Expires attribute, this setting the expiry time of the page but is not setting the expiry time of the image which is going with the page

How to set auto-exposure off with jmf

i need to set auto-exposure option off of my usb cam (i am using a a4 tech usb cam) is it possible to do this in jmj if so can you provide me some examples about it
any help is appreciated

Hi, I need to know how to turn off Auto-exposure, and how to control exposure time programatly with JMF, is this possible?? I been looking in docs and google with no luck
Regards,
Daniel Jimenez

How to set up the Time Capsule as an access point

Hi there,
I have home office and am having wifi-connectivity issues due to the layout of my home.
I'm getting the electrician to set up ethernet outlets in various rooms in my house so that I can get wired connections in several rooms. What I want to do is connect my Time Capsule to one of those ethernet ports (see the diagram below) so that I can still broadcast a wi-fi signal in my house while having wired connections elsewhere.
|->
Lan Port 1
Home Office (Laptop)
|
|->
Lan Port 2
Living Room (TV)
Modem
->
Wired Router
|
|->
Lan Port 3
2nd Bedroom (Xbox)
|
|->
Lan Port 4
Dining Room (Time Capsule)
In my research in how to set this up, I've come across documentation that shows how to convert an old Netgear/Linksys wifi router to an access point. Here's an example of the documentation I've run across: http://www.smallnetbuilder.com/wireless/wireless-basics/30338-how-to-convert-a-w ireless-router-into-an-access-point. What I haven't encountered is how to do this with a Time Capsule.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Thanks a ton for any help or advice. It's much appreciated.

Excellent.. great to see people doing the job properly and wiring ethernet.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
Apple system is slightly different.. although the AP method would work the TC has a programmed state for placing it in AP mode.
And Apple even documented it.
http://support.apple.com/kb/HT4260
The difference in your system, is you are not using an Apple primary router (I presume) but otherwise the same.
Any router setup as WAP, you bridge the router part.. and you use Same wireless name.. same security setting (WPA2 Personal is WPA2 AES and the only one suitable). Same passkey..
I would add one difference to the apple insstructions.. they depend on auto wireless channels working. IMHO, auto anything in wireless is akin to voodoo black arts and has more to do with beads and rattles than science. It works fine in some case.. terrible in others.. lock it down. Set the wireless yourself.. at 2.4ghz there are only 3 non overlapping channels.. 1, 6, 11 .. if you use 300mbit N on the main router, it will use 2 of those channels.. choose the third for the TC.
Of course the TC can also use 5ghz.. and I lock it down as well but that is more my control freak nature.. and strong skeptism of anything auto in the wireless world.
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Your number auto changed.. fun isn't it when i edit it shows correctly but when I post it changes the format.
On the new setup the printer will still be available to all clients .. whether wireless or wired.
And to second part, yes, all file access is not going to change.. well I don't predict any.. IP of the system might change around but overall you are creating a single flat network. And that will work fine.

How to set a specific time zone for time channel in DIADEM

Hi,
I'd like to know how to autmatically set a specific time zone for time channels in DIADEM.
For example, I have stored data with corresponding time channel in UTC time on a disk which was collected in another time zone. Now I want to analyze this data and I want the time channel to show the local time in the time zone where the data was collected, and not the time in the local time zone where the computer is located.
The time channel should also take site local summer/winter time into account. Now I'm running a script that handles it for me which adds or subtract hours according to my input. The problem is that I'm handling data from several different time zones and I'm not located in any of them and when you're running a lot of data over a greater time period, it's easy to make mistakes, especially when it comes to summer/winter time. Is there a any clever solution to this already implemented in Diadem that I have not found?

Hi hj77,
No, I'm sorry, DIAdem has no time zone functionality at all. I'm afraid you have no choice in DIAdem but to keep running your scripts. Summer and Winter time are truly tricky, because the rules for when the changes occur are different in different countries and states within countries and also can change from year to year within the SAME country (as they did in the US a few years ago).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

How to set the interval time in the   JFormattedTextField? Pls Contribute..

Hi Frienz,
Hi have a following code in which i want set the interval time for the TextField by 15 min
So how it is possible please tell me out.
DateFormatter frmtr = new DateFormatter();
               SimpleDateFormat sdf = new SimpleDateFormat("HH:mm");
               frmtr.setFormat(sdf);
               frmtr.setAllowsInvalid(false);
               DefaultFormatterFactory factory = new DefaultFormatterFactory(frmtr, frmtr, frmtr);
               fmtToTime.setFormatterFactory(factory);

AFAIK there is no easy (pure java) way: either you exec something (depending on your paltform) or use native code. Appropriate privileges will be necessary.

Waveform Chart - How to set X scale time.

I have a Waveform chart (v6.1) and I want it to display 30 seconds of data. What is the correlation between the Time History buffer and the Time inputed on the X-scale. The X-scale format is set to Relative Time. I set the initial time to 0:00. The input data is coming in at 20 samples/sec also. How do I set up the chart to show only 30 sec of data.

You can turn Auto scale off and set the left value to 0 and right value to 0:30.
A second method is to set the chart history length to 600 (20 samples per second * 30 seconds). Setting the chart history length can only be done at design time.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How to set the running time of Thread??

Hello all
i am new and fresh student to learn Java.
i want to set a limit time to run a thread.

public void interrupt()
Interrupts this thread.
First the checkAccess method of this thread is invoked, which may cause a SecurityException to be thrown.
If this thread is blocked in an invocation of the wait(), wait(long), or wait(long, int) methods of the Object class, or of the join(), join(long), join(long, int), sleep(long), or sleep(long, int), methods of this class, then its interrupt status will be cleared and it will receive an InterruptedException.
If this thread is blocked in an I/O operation upon an interruptible channel then the channel will be closed, the thread's interrupt status will be set, and the thread will receive a ClosedByInterruptException.
If this thread is blocked in a Selector then the thread's interrupt status will be set and it will return immediately from the selection operation, possibly with a non-zero value, just as if the selector's wakeup method were invoked.
If none of the previous conditions hold then this thread's interrupt status will be set.
Throws:
SecurityException - if the current thread cannot modify this thread
to quote the api
but in your case Aldaris it would have no effect
but if you wrote the code as..public void run(){
while(!interrupted()){
System.out.println("Pete_The_Hat");
}then it would break the loop :-)

How to set long exposure times on a Powershot sd800?

Similar Messages

Maybe you are looking for