How to set MBair to acting like ad-hoc wifi router ...

Hi all X'
I wanna to participate a ipodtouch4 to the cable internet at the MBair.
The internet at the MBair is with a cable but with NO ROUTER.
HOW CAN I MAKE THE MBAIR TO ACT AS A 'ROUTER'?
DHCP seems not the way it is.

Comcast certainly can and does put the SMC modem into bridging mode for customers.
From an older thread....
"The request to put the router in bridge mode takes Comcast about 3 seconds to do. The correct number to call to have it done is 800-363-2416 and ask anyone who answers to do this."

Similar Messages

How to set auto backup as like quark express

Hi,
I want to know how to set auto backup opening files in InDesign 6 as like quark express

InDesign restores everything after a crash.
Versioning was removed aw hile ago, now you should set it up on OS or computer level or use a cloud service like dropbox which offers such functionality.
For formatting use Paragraph Styles, for exceptions use Character styles. It is a no-go to make a font bold, it must be done via styles. I think it is a problem with Quark documents that people bolded with the B button their text, this caused false styles and did no semantic styling which would not allow to create PDF/UA documents.
Paragraph and Character Styles are completely different in InDesign than in Quark. In InDesign every font property is defined in a paragraph style. Character Styles are only used for exceptions and only the different properties are defined. E.g. if you have black text and want some words or letters to be red the InDesign Character style would define only the property character color to red, everything else would remain empty. So you could apply the same character style to text with different paragraph styles with different fonts and sizes. In Quark you would have to set up a different character style for each paragraph style.

LabVIEW 8.6 propositions on how to build application that acts like reader form specified field dependent on which values been selected

Hello everyone!
I am newbie to LabVIEW with some previous experience programming in different languages.
My goal is to build the application that upon my selection needs to give specific values from previously filled and prepared file.
For example, I have different types of operations (milling, drilling, turning..) and different grades (type) of steels (Uddeholm steel grades: NIMAX, IMPAX...and about 40 of them). For every operation there are different input data (Coated insert, uncoated). Based of those information application should give out cutting speed and feed rate data that are stored in some file. I understand I can do it in Excel spreadsheet or LV spreadsheet, I would prefer LV because of portability to systems without Office installed on them. I also understand that all those issues concerning input data for output results I can easily solve with case scenario.
Main issue is decision between different types of files that I can easily address like 2D matrix to get required data, which and how to do it.
I would like to know what I should acknowledge first before doing any further work?
And does someone have some simply prepared VI on which I can work my way on?
If you are willing to help me with guides I would be happy to answer any of your questions.
Vedran Galeta

Thank you very much for your reply.
This application that I am working on is completely static due to communication. It simply needs to provide entry in table depending on selected inputs in front panel, and of course display it front panel. I know what I need to do, as well as the structure. Only thing that I don't know yet how to do it in LabVIEW.
When I mentioned "LV spreadsheet" I meant on read from file option, you got that right.. The thing is that now I have large amounts (not large in acquisition data point of view, 5 spread sheets, with 45 rows and 15 columns) of data saved in Excell, and my goal would be to get that data in LabVIEW application, for the ease of access. And still leave that xls file as is, due to all connections that he have with smaller xls files. So in compact version of the story I am going to use save as comma separated (or tab, that depends of course) values from Excell with or without extra editing of created file in order to load that file into prepared program structure in LabVIEW. After I manage to do that, of course I will work my way for all other extras that I am gonna put eventually in program structure. So this would be like a backbone, I know it sounds simple. As a matter of fact I would probably be finnished allready in VB but highest demand is to do this in LabVIEW, and I am fully down with that.
Regards,
Vedran

How to get keyboard to act like windows

I have bootcamp installed with a copy of windows on a macbook pro. When I'm in the windows mode the keyboard will not function like windows. It is still set up for apple.
Can I change this?
Thanks
Jeff

Is the cursor in a textbox?
See my notes and example program here:
http://forums.ni.com/t5/LabWindows-CVI/Is-it-possible-to-determine-which-line-of-a-textbox-that-a-us...

How to set phone number format like start with 0 or + it is not allowing

Hi All,
We Are trying to give in phone number field as number start with 099235623 or +91- like that
but it is not allowing to chage format
it is taking 99235623 eventhouh we entered as infront of zero
our requirement is we need to enter zero also
please give any idea
Thanks
Rio

Hi,
First Check the Data Type of the Field. That must be "DTYPE_PHONE". If this is the Data Type, then, it will allow the phone format set at the Locale Level for the Application. Check the Format at Locale Level.
[OR]
It's simple, you can change the Data Type of the particular Field to "DTYPE_TEXT".
Regards,
Joseph ArulDass

How to set up Time Capsule with no internet or router wirelessly?

Hi, I would like to know if it is at all possible to setup a Time Capsule wireless without the use of Internet or a router altogether. I want to wireless set it up directly to a an Apple MacBook Pro.
Thank you.

If you decide to do this, the simplest way to accomplish your goal would be to download and install AirPort Utility 5.6 for Mac OS X Lion
Perform a Factory Default Reset on the Time Capsule to get it back to default settings using this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ
Then open AirPort Utility 5.6 and click Continue to follow the guided setup to "Create a wireless network".
You will need to click "ignore" for messages that you see telling you that you do not have an Ethernet cable connected to the WAN port and also that you do not have an Internet connection.

How to set netctl to have eth0 up and wifi

I didn't find the clear answer, yet.
My situation require to connect via wifi and a access point hooked on eth0 to serve more wifi users. The system works, but I must enable the eth0 manually.
This is my setting ( a small ASCII drawing )
+-----------------+ +------------+ +------------+ /
| modem/ | | | | | /
web---- | router |-----<< WiFi WiFi >>-------| Arch Box |-----Ethernet---------------------------| Access |-----<<<WiFi -
| 192.168.1.1 | 192.168.1.2 | | <192.168.2.2 192.168.2.1> | Point | \
+-----------------+ +------------+ +------------+ \
Here's my setting
$ ip route
default via 192.168.1.1 dev wlan0 proto static
192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9
192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.2
During boot I face privoxy failure because it's looking on the ethernet to be available, that it isn't automatically up, as the wifi should take priority.
I configured a profile for route like
$ cat /etc/netctl/wired
Description='A basic static ethernet connection'
Interface=eth0
#Connection=ethernet
IP=static
Address=('192.168.2.2/24')
Routes=('default metric 1 via 192.168.1.2')
#Gateway='127.0.0.1'
DNS=('127.0.0.1')
DNS is managed by pdnsd. Also the internet sharing is working and iptables is finely set. Only the bother to re-enable the ethernet every boot.
I'm afraid it doesn't start the wired configuration by netctl-systemd, At the moment I don't will to shut down, so I can't ensure that is possible. I most of my trial didn't work, then I just have to do the old style ifconfig eth0 192.168.2.2 netmask 255.255.255.0 up and restart privoxy.
Any advice, please.
Last edited by TheSaint (2014-05-11 13:54:17)

The Ethernet connection is used to get into my box (sets as a server), which provide Internet sharing, by some nice junk filtering.
Then for my box the route to Internet is on 192.168.1.1, that is the gateway.
The second route is an incoming route which will follow the the 192.168.1.1 branch. Maybe it's defined as bridge, but it isn't something of my knowledge.
Practically we, family members, might chose either to connect to the modem directly or to my AP, the disadvantage to go directly, conflicts with my box, slower DNS and a big bunch of advertisement.
So, the traffic starts from the right hand side to go to Internet (on the shown sketch). The AP just take newcomers to go to my box, via Ethernet connection.
So yesterday I waited to stop, to much traffic. But this morning I restarted, because of new kernel too, but the netctl profile blatantly failed on me at the first trial. The I got back to the elder style to get things going. But I do believe that it should have a chance to start automatically.
I read the wiki, but no one mention about this kind of lay-out.
Furthermore, I should arrange privoxy to look out this and start after
Last edited by TheSaint (2014-05-12 06:09:25)

How to connect hp deskjet printer 2060 to a wifi router

I have a Deskjet 2060 AIO deskjet printer and want to connect to the Netgear Router N300 DNG2200 on the usb port on the router. When the printer is connected there is no notification on the USB port on configuration page. If I connect usb drive it is dected. Thanks for help in advance.

I really feel bad that I bought a product for which the customer support is so poor.
@Underwater
Yes you can add the printer to the router and the router should be able to direct your requests. Due to the printer software restrictions, the other utilities like cleaning/alighning etc would not work and you'd have to connect via USB.
I am using the same printer with my Belkin N600 router and the printing works fine.
And on a side note, just try to figure out things yourself. The support (as evident from the above two replies) is outright pathetic and misleading.

How to use my iphone 4 MC604HN as a wifi router??

i dont have a personal hotspot in my setting, where as my friend have d same.... they are also using iphone... dont know the model number, sorry ... but he told its different from me.... what to do know??

If you have a valid sim card or know somebody who has one, stick that in there to activate your phone, then just take out the sim after you're done activating it an it should work fine.
Hope this helped!
Cheers

Using AX as wireless router, how to set up w/ security and airtunes on XP

I previously had a Linksys wireless router. I just purchased an Airport express to use as the wireless router (and remove the Linksys router) as well as use the Airtunes functionality.
After some trial and error, I have been able to wireless connect my computer to the AX on it's own (the linksys router is now unplugged and out of the equation). I can connect to the internet fine on my PC (XP Pro SP2).
Trouble is, when I use the Network Setup Assistant, it shows the apple network listed, but it can't connect to it, no matter how many times I try, reboot my machine or reboot the AX. I've tried both the "setting up a new network" and "editing an existing network" option, and in each selection, after a few minutes of trying to connect to the network, I just get a failure message.
If I try and use the Admin utility, nothing shows up in the left-hand list window, and when I Press re-scan, still nothing shows (it doesn't even appear to scan).
I'm not sure what I'm doing wrong. I can't find simple instructions on how to set up the AX as the only wireless router for a PC and set up security and Airtunes (I'm assuming enabling airtunes is done in these applications, as I haven't seen anything about that yet either).
Any ideas on how this is done with a PC? Much thanks!
Dell 4500 series

I have found the 'DHCP Reservations' option on the AirPort Extreme to be buggy. I seem to remember it causing IP conflicts for some reason. I think what I remember is that if the computer with the reservation was off, and the DHCP server then handed out that IP to another DHCP client, then there would be a conflict when the reserved IP computer was turned back on. Maybe it was an issue in ealier versions of the AE or OS X as the case may be, and maybe it's been corrected, but I've never bothered using it agian since the method I describe below has always worked without fail. Also, I'm guessing DHCP Reservations would work fine if one manually enters IPs outside of the DHCP range but in the AE 'DHCP Reservation Setup Assistant' the IP options provided are within the DHCP range which to me makes no sense and increases the potential for IP conflicts.
Here's what I do to setup a mixed environment of static and dynamic IPs on my network. It works like a charm and does not require the DHCP server (beyond the distribution of dynamic IPs to hosts using DHCP).
For machines on my network that are accepting services from the public network, I set them up with static IPs using the 'Manually' option (System Preferences/Network/Ethernet/Configure IPv4). The settings for 'Router' IP address and 'DNS Server' IP address should both be set with your gateway/router LAN IP). Use an IP address below or above the DHCP range of adresses (in AE/Internet/DHCP/DHCP Beginning & Ending Address).
i.e. if my subnet is 10.0.1.1 and my DHCP range is 10.0.1.100 to 10.0.1.150, you could set the static IPs on your local hosts as 10.0.1.x where x = any number from 2 - 99 or from 151 - 200 as an example.
All other machines and devices that do not require static routing are setup as DHCP clients and get a dynamic IP from the AE. To me it's a simpler setup though it might take a little extra time to setup initially.
John

How to set MQ message header properties using JMS adapter? (10.1.2)

Hello,
I am trying to send MQ messages from a BPEL process. We are using OAS 10.1.2 and JMS MQ adapter. Could you please let me know how to set the message descriptors like message format, type, report and reply to queue properties and queue open options (in jmsAdapterOutboundHeader).
Regards,
Geratayya

put something like this
<activationAgents>
      <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
        <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
        <property name="portType">PARTNERLINK_PORTTYPE</property>
      </activationAgent>
    </activationAgents>

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

How do I return functionality of my bookmarks menu before Firefox update 23.0.1? I don't LIKE internet explorer, now my firefox is acting like IE; gee thanks.

How can I restore the functionality of the Bookmarks shortcut. I DO NOT LIKE internet explorer, it is cumbersome and slow. How can I modify the bookmarks shortcut to act like a menu again? I do not like the bookmarks and history pop-out... Firefox was above the bar, now I have 2 copies of internet explorer on my computer, one with an icon that looks like an E and one that looks like my old firefox browser.... This was a result of the update 23.0.1 this morning, it was perfect when I went to bed last night.... Maybe I should use Chrome?

does it work as expected when you launch firefox in safe mode once (to rule out the interfering of any addons)?
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

The sound doesn't work. It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored and still no

It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to set MBair to acting like ad-hoc wifi router ...

Similar Messages

Maybe you are looking for