How to set my MacPro to not go to sleep

I am running Euphonix MC control. They recommend:
It is recommended that you do not set your EuCon workstation(s) to Sleep.
We recommend setting your Mac to not go to sleep and never put hard drives to sleep.

"Energy Saver" system preference.

Similar Messages

How to set an attached USB drive to automatic sleep using Airdisk?

Greetings all!
I am looking for a way to set my two USB drives to sleep when they are not being used. I only use them a few minutes a day, and don't want to run them down or use the electricity to keep them spinning.
It seems there has been some discussion about this but I haven't been able parse all the conversations. Some people seem to have gotten it to work, while others are relying on a drives "internal" mechanisms. It would be great if someone (perhaps at Apple?) could chime in with an overview of the problem.
Perhaps it is linked to the method of authentication - ie., (using Airport Utility 5.1), whether the Disks > File Sharing > "Secure Shared Disks" > is with "disk password" or another method?
Some have suggested a radio button for a future firmware/other update such as:
"Set drives to sleep when not in use" (Let's hope for this!), but I am hoping for a simple solution in the near future.
Any thoughts out there?
best to all.
*NB: I first posted this on Posted: Apr 4, 2007 12:23 AM and got NO response at all - hopefully I'll have more luck this time !

Hello Andy,
Thanks for your reply.
1. For using Microsoft Outlook rules, we need to keep the computer on, even after work or the colleague is on leave. That is not allowed in my company.
2. For sending an auto-reply email based on subject, that is impossible because the emails from customers are different and we don't have a basic standard.
3. Could you please elaborate how to set a transport rule in Exchange server to achieve the goal?
Thanks a lot in advance.
Steven
1. Only client rules require that the Outlook client remain open. An auto-reply rule should be server-side, so no need to leave Outlook open.
2. Yep!
3. Walk through the hub transport rules and you see one that replies with a rejection code. Thats the best you can get with a hub transport rule and not something I would recommend in your scenario. You could also search around for 3rd party solutions.
Twitter!:

Macpro will not go to sleep, just by relocation macpro?

I have a 12core 5,1macpro with mavericks.
Sleep always worked fine untill I moved my macpro to another location in my house.
All connections are the same, no new deviced.
The macpro will not go into sleepmode, the screen goes dark but the computer is still awake.
I tried SMC and Pram, both did nothing. I typed 'wake reason' in console with zero hits.
Any ideas?

I did a 'pmset -g log' in terminal.
Time stamp                Domain                        Message                                                                               Duration            Delay
==========                ======                        =======                                                                               ========            =====
UUID: CEB12517-DC2B-48D7-8D37-2FC82FDD1DEA
27/03/14 23:56:27 GMT+1 Wake                          DarkWake to FullWake [CDNVA] due to HID Activity: Using AC
27/03/14 23:56:27 GMT+1 Timedout                      Kernel: Response from Messages timed out (powercaps:0x9)                                       30000 ms
27/03/14 23:56:27 GMT+1 Timedout                      Kernel: Response from Core Sync timed out (powercaps:0x9)                                      30000 ms
27/03/14 23:56:27 GMT+1 Timedout                      Kernel: Response from System Preferenc timed out (powercaps:0x9)                               30000 ms
27/03/14 23:57:33 GMT+1 Assertions                    PID 21(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xe00000231 [System: PrevIdle SRPrevSleep kCPU]
27/03/14 23:57:48 GMT+1 Assertions                    PID 21(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000231 [System: PrevIdle SRPrevSleep kCPU]
27/03/14 23:57:48 GMT+1 Assertions                    PID 21(powerd) Released InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000231 [System: PrevIdle SRPrevSleep kCPU]
28/03/14 00:03:09 GMT+1 Assertions                    PID 443(CINEMA 4D) Released PreventUserIdleSystemSleep "Stay compatible" 00:11:05 id:0x1000001e5 [System: No Assertions]
28/03/14 00:03:15 GMT+1 Assertions                    PID 21(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xe00000251 [System: SRPrevSleep kCPU]
28/03/14 00:03:30 GMT+1 Assertions                    PID 21(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000251 [System: SRPrevSleep kCPU]
28/03/14 00:03:30 GMT+1 Assertions                    PID 21(powerd) Released InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000251 [System: SRPrevSleep kCPU]
Sleep/Wakes since boot at 27/03/14 23:40:40 GMT+1    Dark Wake Count in this sleep cycle:0
Time stamp                Domain                        Message                                                                               Duration            Delay
==========                ======                        =======                                                                               ========            =====
UUID: 7DB33481-AA98-4C8A-B92B-A23ED42C6672
28/03/14 00:03:35 GMT+1 Wake                          DarkWake to FullWake [CDNVA] due to HID Activity: Using AC
28/03/14 00:03:35 GMT+1 SlowResponse                  Kernel: Response from Core Sync is slow (powercaps:0x9)                                        4974 ms
28/03/14 00:03:41 GMT+1 Showing all currently held IOKit power assertions
Assertion status system-wide:
   BackgroundTask                 0
   PreventDiskIdle                0
   ApplePushServiceTask           0
   UserIsActive                   0
   PreventUserIdleDisplaySleep    0
   InteractivePushServiceTask     0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Kernel Assertions: 0x10c=USB,BT-HID,MAGICWAKE
   id=501 level=255 0x4=USB mod=27/03/14 23:48 description=EHC1 owner=AppleUSBEHCI
   id=502 level=255 0x4=USB mod=27/03/14 23:51 description=UHC6 owner=AppleUSBUHCI
   id=504 level=255 0x4=USB mod=27/03/14 23:51 description=UHC4 owner=AppleUSBUHCI
   id=508 level=255 0x100=MAGICWAKE mod=01/01/70 01:00 description=en1 owner=en1
   id=509 level=255 0x8=BT-HID mod=01/01/70 01:00 description=com.apple.driver.IOBluetoothHIDDriver owner=BNBMouseDevice

With Mountain Lion MacPro does not wake from sleep

I have installed Mountain Lion (10.8.1) on a Mac Pro (Model appeared early 2008).
However when the system is sleeping, Mac does not awake from sleep by pressing any key of the keyboard.
The keyboard is inactive.

That's interesting, I don't use the Apple->Sleep, but I tired it several times with 10.8.1 on my system and it woke up in a timely fashion.
There is something strange going on with it being intermittent for me, a combo of always & intermittent for you.
I suspect there is some combination of circumstances that's not obvious that's causing it.
I've looked through the logs and don't see any clues.
I submitted a bug report some time back.
You might consider submitting one as your situation is a little different and you have a circumstance that always causes the problem.
You need to be register here it's free, and then you can submit bug reports here

How to set button which is not in my application?

hi all,
i m new to web dynpro.i have to set the radiobutton like this my button ll be not visible if one other application through i m calling.if directly i am calling it should be visible.
can u help me how to proceed?
thanks,
tania

Hi...
If I am getting your problem right then your requirement is ...
1)     It should be visible if it call from your application
2)     It should not visible if it call from different application.
There is two different way to do this.
a)     you can have a flag.
b)     Change the flag true or false ( or value 01 or 02)id its call from different application
c)     Attached that context attributes with the visible property of the radio button.
2nd way
i)     You can have a flag to identify, where from it is calling
ii)     Now depending upon the flag dynamically you set the visible property of the radio button.
iii)     Write the code at WDDOMODIFYVIEW method
iv)     Here is some code for example
    data: rb1 TYPE REF TO CL_WD_RADIOBUTTON,
          rb2 TYPE REF TO CL_WD_RADIOBUTTON.
rb1 ?= view->get_element( 'RADIOBUTTON' ).
rb2 ?= view->get_element( 'RADIOBUTTON_1' ).
get single attribute
    lo_el_fg->get_attribute(
      EXPORTING
        name = `FLAG`
      IMPORTING
        value = lv_flag ).
IF lv_flag eq 'TRUE'.
    rb1->set_visible( 02 ).
    rb2->set_visible( 02 ).
ELSEIF lv_flag eq 'FALSE'.
    rb1->set_visible( 01 ).
    rb2->set_visible( 01 ).
ENDIF.
Please let me know if you need any help on this..
Regards
Satrajit

HOW TO SET A JFRAME TO NOT MOVIBLE

How can I set a JFrame that contains several JPanel's not movible?
Thanks.

store the location of frame, when frame is moved set the location back
to the original location.

How to set a page to not update the session

Hi all,
I have a page that has Ajax on it and because it updates the
session all the time the page does not timeout!
So how can I make the page timeout after 20 min. like all the
other pages??
Regards
Martin

Well, CF won't timeout for you automatically since you are
actively renewing the session every time you perform your ajax
call. You could always put a timer in to redirect the user to a
logout script using javascript after 20 minutes of inactivity on
that page.

How to set column names when not using object of row data in constructer

hello i am using JTable constructer as
public JTable(int numRows,
int numColumns)
can i set column names for the columns .How?

hi,
sure you can: Create a subclass of DefaultTableModel and overwrite the method public String getColumnName(int) which returns the column name of a specific column. Then use this subclass as the data model for the table.
best regards, Michael

How to set folder windows size not to change?

Hi,
I'm having a problem with displaying folder sizes in the finder, I open my applications folder, centre it, stretch it to display how I like, use the view options for icon size, spacing etc; great, just how I like it.
Trouble is, when I next open the folder it is centred but much smaller! Is threre a way to keep it as I want?
Thanks in advance :0)
B

The Buffster wrote:
Hi,
I'm having a problem with displaying folder sizes in the finder, I open my applications folder, centre it, stretch it to display how I like, use the view options for icon size, spacing etc; great, just how I like it.
Trouble is, when I next open the folder it is centred but much smaller! Is threre a way to keep it as I want?
Thanks in advance :0)
Have you clicked "use as defaults" at the bottom of the preference window?

How to setting Ctrl Key: PM02 not become auto generate PR ?

Hi Gurus,
While using Ctrl Key: PM02 (For External) for creating Maintenance Order, Purchase Requisition (PR) will generated automatically.
Can we make it not automatically, so then person responsible to create PR will create PR base on Maintenance Order. This requirement base on our client environment while person who create Maintenance Order is from different department and Maintenance Order person must not create PR.
I am waiting for your knowledge sharing in this issue.
Regards,

Hi,
Generation of PR can not be controlled through control key , however generation of PR can be controlled for a order type through
Maintenance and service order->Functions and settings for order type->define change docs.collective PR indicator
Hope that it helps.
With regards,
Mrinal

How to set weblogic 8.1SP4 not generated a EAR file; just leave ear folder

Could anyone please tell me how to configurate weblogic 8.1?
Thanks.

How about phrasing a full and detailed question?
If you're asking about whether you can deploy an EAR in exploded form instead of JAR form, then the answer is yes. You simply navigate in the WL console to the root directory of your exploded EAR and select that. If you're careful, you can also edit the config.xml if you've already deployed a JAR form for the EAR and change the path to point to the exploded EAR directory (you wouldn't do this while the server is running).

How to set logging on ISE not to UTC timezone

Hello everyone,
I was wondering if there's a way to change the way ISE logs authentications in terms of timezone. I found that it is UTC even if I changed the timezone to my local timezone (PST8PDT).

You are correct, the time is set before the ise application is installed. The database is primed after to configure ntp dns and basic configuration.
Also the doc recommends using utc.
Thanks,
Tarik

How to set iPod Classic to NOT automatically update?

After dealing with the debacle of iTunes 11 on my Windows 7 PC for a month I made the move and rolled back to version 10.7, and am once again able to use iTunes the way I want to, with ease and efficiency. One concern I have is that when I connect my iPod to sync it with my library, it automatically downloads updates to the iPod, and I'm worried that at some point the updated iPod software will become incompatible with my older version of iTunes, and I'll be forced to swallow the load of garbage that is iTunes 11 if I want to keep my iPod synced.
I cannot find an option when I connect my iPod and view it in the iTunes window where I might choose to NOT automatically update the iPod software. It tells me the iPod is up to date and gives me the date when it will automatically check for updates, and I assume that when an update is available it automatically downloads and installs the update. Am I right? And is there a way I can prevent this from happening?
My iPod is working fine and I don't see any reason to update it, even if they added new features I prefer to stick with the old version. I no longer trust Apple to issue updates that conform with my user needs and preferences and that are not full of performance bugs.

I've got Version 10.x and in Edit>Preferences, I've had 'check for new software updates automatically' enabled. Periodically I get a 'Do you want to install Version 11?' and I say 'no' and all's well. Why do you think yours will automatically install an update?

How to setting PRBS/MLS amplitude not 0 and 1 only?

hii
i want to generate input from PRBS or MLS connect to model in which i write the differential equation using formula node.
but i want to change the amplitude instead of 0 and 1 change to 0-0.1 or 0-10. anybody have experience on this?
thans

SYS@RMAN 23/02/2009> create table testing(no number(2));
Table created.
SYS@RMAN 23/02/2009> alter table testing add constraint yesno check (no in('0','
1'));
Table altered.
SYS@RMAN 23/02/2009> insert into testing values(&no);
Enter value for no: M
old   1: insert into testing values(&no)
new   1: insert into testing values(M)
insert into testing values(M)
ERROR at line 1:
ORA-00984: column not allowed here
SYS@RMAN 23/02/2009> insert into testing values(&no);
Enter value for no: 1
old   1: insert into testing values(&no)
new   1: insert into testing values(1)
1 row created.
SYS@RMAN 23/02/2009> insert into testing values(&no);
Enter value for no: 2
old   1: insert into testing values(&no)
new   1: insert into testing values(2)
insert into testing values(2)
ERROR at line 1:
ORA-02290: check constraint (SYS.YESNO) violatedIs that you want

How come setting look and feel not successful

class gameble{
public static void main(String argv[])throws Throwable{
try {
UIManager.setLookAndFeel(
UIManager.getCrossPlatformLookAndFeelClassName());
} catch (Exception e) { }
console cs = new console();
cs.addWindowListener(new GenericWindowListener(cs.tv));
cs.setLocation(320,0);
cs.show();
with the above codes, i want java look&feel, but it still shows me window look & feel. need your help!!

CroosPlatformLookAndFeelClassName looks almost exactly like the java default look and feel.
You can try other L&F like:
try{
UIManager.setLookAndFeel(getSystemLookAndFeelClassName());
//this will take the look and feel of the OS you are working with
catch(Exception e){
System.err.println(e.getMessage());
or
try{
UIManager.setLookAndFeel("com.sun.java.swing.plaf.motif.MotiveLookAndFeel");
//this will take the look and feel of the Unix OS
catch(Exception e){
System.err.println(e.getMessage());

How to set my MacPro to not go to sleep

Similar Messages

Maybe you are looking for