How to set my "reply to" email address to an email forwarded address

I own my own url, which is my last name, and I want the emails I send from mail to actually look like they came from "[email protected]" and not from the cryptic email name that my dsl provider assigned to me. By the way, "[email protected]" email addresses actually is set up to forward emails replied to it back to my cryptic email address (that is my real dsl email address).
I almost lost myself there, but my basic question is how do I tell "Mail" to send out a different reply email address when I send someone an email.

Does your ISP/DSL provider allow customers to enter a different email address to be shown as the sending address for an email account provided by the ISP?
If so, enter [email protected] in the email address field under the Account Information tab for your DSL account preferences.
This will appear as the sending email address for the account.
If your ISP restricts their customers from doing this (some do since spammers don't provide a valid sending or reply to address with their bulk spam mailings), you can include a Reply To address field for the message header but the reply to email address must be entered manually for each sent message.

Similar Messages

  • How to set up SAPconnect with email server

    Hi,
    Does any one know <b>how to set up SAPconnect with email server</b>
    We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
    This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
    When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
    Can any one provide the configuration steps or any document for this.
    Thanks in advance..
    Pratik

    Hi Pratik,
    Check the following link:-
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    these link will help u to config SMTP.
    And one more thing u have to do..
    Go to SE11 n open Table sxnodes in change mode.
    And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
    Hope this will work For U.
    Regards
    Sachin Dhingra

  • How to set up just an email account? - it's not working

    Hi there,
    Could someone please let me know how to set up just an email account for a staff member?
    I tried "E-mail Accounts" - Add an email account - but the password verification NEVER comes through. I've tried send password recoved but does not work (ive deleted it and tried 3 different Password recovery e-mails - gmail / local and another BC one too).. nothing is working.
    So then I read the knowledge base which is out of date:
    http://kb.worldsecuresystems.com/000/bc_8.html?bc-partner says to set up an email account you need to go to Site Users (which doesn't exist) to tick "enable email" - so I tried Admin users but it has no email only option..

    Hi Dandy,
    You can still switch to V2 view to find things. Something I am still doing when I do these irregular jobs, as they only happen when a site goes live and that will only be once a month for us. Twice some months.
    Although I just tried going to V2 and getting up the V3 view, but it didn't send me to the page I wanted.
    I notice that there is a new tab in V3 called Email accounts, where you can set up email accounts now. Try there.
    You will need to have the user set up first under Admin Users and User Roles first I expect.
    Also check workflows are set up properly once you have gone into Email Accounts and set up the email address.
    Or maybe just go back to V2 and do it all there. Click in top rh corner to get back to it.

  • HT5312 How to set up my rescue email account,so that can reset my security question?

    How to set up my rescue email account,so that can reset my security question? The key is I need change my security question

    You won't be able to add a rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

  • I just got an ipad mini and I dont know how to set up an icloud email, please help?

    I just got an ipad mini and I dont know how to set up an icloud email. I know I have an icloud account but it is set up to my gmail. Can someone please help?

    Have a read here:
    http://support.apple.com/kb/ht4810

  • How to set a prefer outgoing email, so i can start sending emails please?

    how to set a prefer outgoing email, so i can start sending emails please?

    If you use iCloud mail: iCloud- Mail server settings for email clients.
    Mac Basics- Mail (OS X Mountain Lion)

  • How to set the IP and MAC address in C program?

    My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
    Any idea is welcome! Thanks!

    Hi
    As a simplest possible solution, you can use the system command
    to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
    Or you can use the DLPI calls ( do a man DLPI or search for a
    Sun documentation on the same at http://soldc.sun.com) to write
    a pure C program.
    HTH
    Shridhar

  • How to set up basic POP email on N8

    I've been reading up on all the email discussions about the N8, and it seems like some things work fine, while others need more development.
    In my case, I would like to set up email using a basic POP email account setup.  I have no need for "push" email right now - as I see it, receiving an email every half hour or so on my phone is an improvement over waiting until I get to my PC.
    Ideally, I would like to leave the messages on my email server, so they will later on be downloaded to my PC.
    I've noticed the following in one of the email discussions here:
    "Cant believe no one else has responded with this before given the time this thread spans. I had this problem until I deleted and re-created my email (POP) accounts and then NOT accept the TOS at the end of the setup process. If you say YES and accept the terms, then your email accts get setup thru the Nokia messaging service and sent emails may get saved somewhere, but certainly not on the phone. You do not have to say yes to the TOS, just decline and finish setting up the email account."
    Since I'm perfectly happy with the way email works on my laptop, using my existing servers, I think I should decline the TOS as described above.
    I've found lots of guides on how to set up email on the N8.  Can anyone here recommend one for how to do (only) what I need, in order to manually set up POP email on a N8, using the identical server information and settings that I now have on my laptop?  Or, if this doesn't exist, can someone post the necessary steps here?
    Thanks!!!

    I have had a little play with this but will just outline what I found seems to happen because I did not thoroughly test it. Others experiences may be different.
    If setting up a new account and one selects one of the listed email service providers and not "Other" then it sets up an IMAP account and gives the choices that Rayhipkiss describes together with the terms and conditions acceptance request. This can be seen after the setting up by looking in the settings for the server (which often, maybe always?, is a nokia.supl.imap one). If one deletes the server and server ports and replaces them with the same email service provider's pop and smtp servers and ports then the same setup choices that Ray mentions still remain. Once the account is set up you can always go back and change the server and port entries in the N8 setup for that account (see below for a difference).
    However, even though one has set the pop ports it still seems to do an imap connection - this can be tested by setting up a Gmail account where one can turn off and on allowing imap server connections in the settings on ones Gmail account's setting on the webmail site. One finds that disallowing imap connections but allowing pop connections blocks the N8 even if one has entered the pop servers and ports on the N8.
    Now, if when setting up the account on the N8 one selects "Other" it normally (see below) gets one to enter the address and pass for the account and then goes straight to allowing you to enter the servers and ports. Now if one enters these and it then takes one straight to the client for you to collect and send email. But now if you go back into settings for that account one gets the setting choices that I outlined i.e. the one that includes "Don't sync to server". If set up as a pop account it seems to behave as a pop account - for example, if one turns on the imap servers at the Gmail denying pop connections then if one tries to collect mail Gmail comes back with a certificate error (the certificate is for imap not pop). Unlike the settings menu giving the other settings Ray outlines this settings menu does not allow one to nominate a reply to address different to the address sent from and nor does it allow one to go back and change the server and ports. To change the server and ports as far as I can see if set up this way one has to reset up the account from the start.
    OK, even stranger, then what I found is if I set up an account using the offered service providers, not using the "Other" choice then deleted that account and then reset up the same account using the "Other" choice it then behaved as Ray outlines including the terms and conditions acceptance request and also behaves as an imap account even if one enters the pop servers and ports. So the "Other" account setup choice seems to behave differently according to whether one has previously setup that account using one of the non "Other" service provider choices or not?????
    I don't know if anyone wants to experiment further and discover more or clarify the behaviours. I just did some quick playing around so did not analyse it much, however the above is the general gist of what I found. It is sometime since I set up email accounts on my E52 but from memory it behaved much the same way as the N8 does and is generally weak on handling pop accounts - in fact I would suggest that many who think they are using pop servers will find that behind the scenes it is really using imap ones.
    A real downer for me is for a pop account there seems to be no way to set up a reply to address in the sent emails that is different to the address sent from. This need for me being due to the way I manage emails across several machines.
    I'm off to have a beer

  • How to set up additional iCloud email

    How can I set up an additional icloud email address? I already have an icloud account using my domain name and wish to set up an icloud.com address as well.

    If you haven't enabled Mail in System Preferences>iCloud then you should do so, and you will be asked to create an @icloud.com address.
    If you have already done this and have such an address you can add three more in the form of 'aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • HT5312 I have an existing id and I don't know how to set up a rescue email

    How do I set up a rescue email?

    If you know the answers to your security questions then the steps half-way down the page that you posted from should work :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.
    If you don't know the answers then you won't be able to add one until you can answer them, so you will need to get the questions reset first. In which case see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • How to set up an ATT email account in my itouch

    Hi,
    I cannot set up an att email account?

    Try here:
    http://richbui.com/technology/getting_and_sending_att_email_on_your_iphone/

  • HT201342 can u share how to set up i cloud email using outlook 2003 on pop3 settings. has any ine done it

    has any one setup apple id on pop3 settings on outlook . pls share how to set it up

    Hi anilajavaid,
    iCloud only works with IMAP accounts. POP accounts won't work with iCloud.
    Sorry,
    GB

  • How to set sound notification for email

    I cant find the setting for adding sound notifications for my email. The only setting is for preferred email, I want all my emails .  I do have it for messages, but not email

    Go to email......manage accounts........select which email account.....notification sound......select which sound you want........Done deal.  Also make sure you have email notifications in the status bar checked.  Have a nice day.

  • How to set up a netzero email account on ipod?

    I am trying to set up a netzero email addy on my ipod but it will not work. It takes all the information but I cannot send or receive emails. Anyone know what to do?

    Try deleting the account on the iPod and then Google for:
    setup netzero email on iphone
    and follow the instructions given in various sites.

  • Exchange - Gmail :  how to set a REPLY-TO/FROM email address?

    I have Gmail setup as a Microsoft Exchange Account, so that it syncs my mail, calendar, and contacts (works great)
    BUT - the problem is I never use my @gmail.com address to send mail, in Gmail I have several other addresses set up that I send mail "from". I don't like to get tied down to an ISP or service provider domain in case I want to change one day, so I own my own domain names and use my domain for email.
    In my desktop email clients (ie - Thunderbird) I can set the "FROM" address to one of these other addresses, but there is no such option on the iPad.
    Is there any way to configure this?
    Is this functionality going to be enabled in a future version?
    Thank you

    No, there is no Reply to: field in iPad Mail. There are some workarounds, though.
    First, some have reported doing what you said couldn't be done, i.e., setting some other account as the default. I've never tried that but it shouldn't be difficult to find their descriptions here in the forums.
    I only do it on a case-by-case basis, using Mail's way of selecting which email address and outgoing server to use as you start composing the message. That doesn't seem to quite meet your requirements, though.
    As for the future, if you'd like your ideas and suggestions to influence it then submit them via the iPad Feedback Form — http://www.apple.com/feedback/ipad.html

Maybe you are looking for