How to set Navigation panel and Analysis in WAD

Hello friends,
I am learning WAD , and has to publish a query as well as design it.
Well as per the requirement , i need to publish all rows and columns at once.
Usually on SAP Portal, what happens is if there is too much data then it shows the data in PAGES.
I know this setting can be done in WAD,
So if anyone can tell me step by step procedure to do this setting.
Please help

> Isn't this the default Rusty?
Gill,
The default values for a table in WAD display all columns but only 100 rows. In the case of large queries that show results from the entire company it is occasionally necessary to see all rows as well. I set all of my templates with restrictions on both rows and columns that the users will be able to see, but I also include a button in the header with Javascript to set these values to zero in case the user does not want to use the page down features to view the data.
Cheers,
Rusty

Similar Messages

AxAcroPDF ,how to hide navigation panel and float toolbar in 10 ?

.....please use code with c# in winform not web

There is no public API for hiding/showing the navigation panels other that menu item execution.

How to add a navigation Panel and Zoom Slider Bar using Java API

Hello,
I am using Mapviewer Java bean as I have to use Oracle Mapviewer in Java Stanalone application.Please can anyone tell me how to add a Navigation panel and Zoom Slider in Java API. I found the API s for same in Java Script but not in Java.Kindly help.
I am using Oracle Mapviewer 11g.

This is forum sponsored by Adobe make of Acrobat and Reader. Since Chrome and FireFox web browser have chosen to use their own viewer you might get more help in their forums or customer support.

Navigation Panel and content Area can not any more be displayed

Hello Gurus,
we have a very big prolem with our Portal in the Development.
A new colleague has probably changed some settings in the portal. Now by logging into the portal, i can only see the header Area (Masterhead, Tolls, Top-Level Navigation, Page title Bar). By clicking on the role like system Administrator, nothing is showing.
The Navigation Panel and the content area are gone. How can i restore them back?
Any Workaround?
Thanks in advance
Cheers

Hi Anja, Puneet,
thank you very much to have replied.
through the SAP Note and you path, i can access the portal again. I am not using the standard framework.
We have a customized Destop Page, Framework and after a check they still exist. Could you once advice where could be the error. Or where someone chnage the settings?
many thanks in advance.
Cheers

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows.
I have 5 oracle instances. Every time if i want to start up the services , I am manually setting the environment variable (ORACLE_HOME and ORACLE_SID) and starting the services one at a time.
Can we set multiple ORACLE_HOME and ORACLE_SID in Start->My computer-> properties-> advance-> Environment variable.
Thanks
Naveen

Hi ,
Can you please give me the link, for the doc you are referring to
Thanks
Naveen

How to set the IP and MAC address in C program?

My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
Any idea is welcome! Thanks!

Hi
As a simplest possible solution, you can use the system command
to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
Or you can use the DLPI calls ( do a man DLPI or search for a
Sun documentation on the same at http://soldc.sun.com) to write
a pure C program.
HTH
Shridhar

How to set default currency and Country in R12 financial modules

Hi all,
How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
Can anybody advise ?
Thanks & Regards,

Hi,
Change the below profile for the user to a territory different than the US :
In System Administrator, navigate to Profiles -> System.
Select Site, Application, and Responsibility.
Profile options:
Default Country
HZ: Reference Territory
ICX: Territory
Regards,
Raju.

How to set the WIDTH and ALIGN of h:column in h:dataTable ??

How to set the WIDTH and ALIGN of <h:column> in <h:dataTable>??
Thanks a lot!

Hi,thanks to your reply.
Now I find a more convenient appraoch to set column's width and align respectively:
<h:dataTable ...>
<h:column>
<f:facet name='header'>
</f:facet>
<h:outputText style="width:80px; text-align: right;" value='#{row.fieldA}'/>
</h:column>
<h:column>
<f:facet name='header'>
</f:facet>
<h:outputText style="width:120px; text-align: left;" value='#{row.fieldB}'/>
</h:column>
</h:dataTable>
It works fine.
^-^

How to set the router and play the Command & Conquer using direct IP mode?

My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?

Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details.

How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain. Also the same problem with input coupling
Does anyone know how to set the gain and input coupling for each individual channel?
Thanks,
Hector
LabView 8.5 Windows XP

Hey Hector,
http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
This has a few examples of how to do that. Let me know if you have further questions.
Have fun!
-gaving

How to set the Mail and Fax options for the Smartforms ???

How to set the Mail and Fax options for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

>
veera Karthik wrote:
> How to set the Mail and Fax options for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
Hi
Check this Link:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
Vishwa.

How to set input delay and output delay when source Synchronous

ClkIN is the board clock which is connected to the FPGA. Clkif is the generated clock from ClkIN. The Device's clk come from Clkif. So, how to set input delay and output delay in this scene(within my understand, this is Source Synchronous)?
The example in many document, the input delay and output delay setting all refer to board clock(within my understand, this is System Synchronous). In that scene, the input delay max = TDelay_max + Tco_max; input delay min = Tdelay_min + Tco_min; the output delay max = Tdelay_max + Tsu; output delay min = Tdelay_min - Th.
So, I want to know how to set input/output delay in the Source Synchronous.
In system synchronous, I set input/output delay such as:
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
create_generated_clock -name Clkif -source [get_pins cfg_if/clk_tmp_reg/C] -divide_by 2 [get_pins cfg_if/clk_tmp_reg/Q]
create_clock -period 40.000 -name VIRTUAL_clkif //make virtual clock
set_input_delay -clock [get_clocks VIRTUAL_clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks VIRTUAL_clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -max 1.800 [get_ports DOUT]
*******************************************************************************************

So, first. Architecturally, the clock that you forward to your external device should not come directly from the clock tree, but should be output via an ODDR with its D1 input tied to logic 1 and the D2 tied to logic 0. This guarantees minimal skew between the output data and the forwarded clock.
ODDR #(
.DDR_CLK_EDGE("OPPOSITE_EDGE"), // "OPPOSITE_EDGE" or "SAME_EDGE"
.INIT(1'b0), // Initial value of Q: 1'b0 or 1'b1
.SRTYPE("SYNC") // Set/Reset type: "SYNC" or "ASYNC"
) ODDR_inst (
.Q (Clkif_ff), // 1-bit DDR output
.C (ClkIN_BUFG), // 1-bit clock input
.CE (1'b1), // 1-bit clock enable input
.D1 (1'b1), // 1-bit data input (positive edge)
.D2 (1'b0), // 1-bit data input (negative edge)
.R (rst), // 1-bit reset
.S (1'b0) // 1-bit set
OBUF OBUF_inst (.I (Clkif_ff), .O (Clkif_out));
This generates an output clock that is the same frequency as your input clock. This is consistent with your drawing, but inconsistent with your constraints - is the forwarded clock a 50MHz clock or a 25MHz clock?
I will assume your ClkIN goes to a BUFG and generates ClkIN_BUFG. Your first constraint generates a 50MHz clock on the ClkIN port which will propagate through the BUFG to (among other places) this ODDR.
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
Assuming your forwarded clock is supposed to be 50MHz, then your 2nd command is close to correct
create_generated_clock -name Clkif -source [get_pins cfg_if/ODDR_inst/C] -combinational [get_pins cfg_if/ODDR_inst/Q]
With this done, you have successfully described the forwarded clock from your design. This is the clock that goes to your device, and hence should be the clock which is used to specify your input and output constraints.
set_input_delay -clock [get_clocks Clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks Clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks Clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks Clkif] -max 1.800 [get_ports DOUT]
If you want to get fancier, you could try adding a set_clock_latency to the forwarded clock to account for the board propagation of the clock
set_clock_latency -source TDtrace2 [get_clocks Clkif]
(But I haven't experimented with clock latency on a generated clock and I don't know for a fact that it works).
Avrum

How can I remove Navigation Panel and "The section which says Please fill the data"

Hi all,
I need to remove navigation panel on the left side and also
the section which is below toolbar and above actual pdf starts which says " you can fill out the following form and save the data.
Regards
Vas

Not Possible

How to make Navigation Panel invisible on portal screen????

Hi,
I need to create two roles ( X and Y ).
when the user is assgned role X: he should see standard portal screen
When user is assigned role Y: he should see customized portal screen.
Features of customized portal screen:
All features of portal should not be seen. The user should see only the iview and nothing else.
What I have done:
Created Role ( X and Y ) and respective iviews
With Framework page:
I copied standard framework page. made all iviews invisible except Desktop Innerpage.
I opend the Innerpage. I made all all iviews invisible except the Content Area.
With Desktop:
I create new desktop and assigned the new framework page to deaktop and made it default.
With Rule Collection: I created new rule collection where:
if Role = Y
display: new desktop
if role = X
display: default desktop
Result:
when I login with role X it shows default Desktop
Problem Area: When i login with ROLE Y, No portal feature is visible But We can still Expand and collapse Navigation panel.
Requirement: I do not want the user should see the navigation panel. It should not be visible on screen even though it is empty.
I tried lots almost all properties. Please help.
Any help would be highly appreciated.
Thanks and Regards,
Aditya Deshpande

hi;
Then you have to create Role Y without workset or Page only with iViews, so no Navigation will be generated. :h1
But if you habe Workset and Page in your role , just go to all Page and workset and set this properties>navigation>Invisible in Navigation Areas to false.
I Hoppe it will help
Take care
Gede

How to set front panel size to be same as one led?

Hello All,
LV2010
In documentation reads that minimum front panel size is one pixel. I need to create front panel which have same size as one led (see attachment). I'm not able to make front enough small just by dragging window borders. I also tried to change front panel size from File->Vi properties ->Window size but that didn't helped. How I can set front panel to smaller size?
Attachments:
Small_front_panel.vi ‏6 KB

I think I got it
In the window apperance option I removed everything except "Allow user to resize window" And the Run options. Then I ran the VI (continuosly since there is no loop) and resized it. After I stopped it, I then removed "Allow user to resize window" from the window apperance options.
P.S! If you try to resize my Vi now, it will pop back out for some reason.
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway
Attachments:
Small_front_panel (1).vi ‏6 KB

How to set Navigation panel and Analysis in WAD

Similar Messages

Maybe you are looking for