How to SET or Configure BIOS to use XFX6200 TC video card for MSI K8N NEO4 Plat.

Hello Friends,
Can any body help me to the following problem?
I am having XFX 6200 TC Geforce / nvidia Grafix card for my MSI K8N NEO4 Platinum Ultra board.
The BIOS states PCIE clock speed as 100 Mhz as default. The setting can be changed upto 145Mhz.
My Video card can be configured upto 350 Mhz. How to do this and which is the right way to use the display card with optimum setting?
Thanks for all those who reply to this.

the coolbits link http://downloads.guru3d.com/download.php?det=815
to manually set the clocks on the graphic card, after installing coolbits, just follow the instruction on that page:
Quote
Unpack the achive (self extracting) and then in the setup directory simply click on the .reg file. To get to these options simply right-click on your desktop and go to 'NVIDIA Analog Display' (Win XP/2003). For Win 2000 and lower you may need to get to the Nvidia Control Panel the old way. Right click desktop > Properties > Settings > Advanced > GeForce xxxx
for overclocking just take a look at the overclocking sections of the forum. make sure to read the stickies before you do anything.

Similar Messages

Bios Settings For MSI K8N Neo4/SLI Platinum MB

Hello all... Has anyone came up with the best and most stable bios settings for the MSI K8N Neo4/SLI Platinum motherboard yet. Specifically under the CPU and Memory menus.
If anyone has seen any, please post them. or post a link.
Thanks
DaaDoctor

Well that depends on the installed CPU and memory, doesnt it? So I find that question kinda odd.
One thing though: Dont use Cool n Quiet.

How to set the 'Configuration Bits' in the PIC16F84

I am using the PIC16F84 in a circuit and I'm programming the assembly for the PIC. However I can't figure out how to set the configuration bits. For example I want to select the LP Oscillator, turn the WDT off, turn the PUT on, and turn the CP off. Normally if I was using the IDE from Microchip I would add the line:
_CONFIG H'3FF0'
However Multsim does not recognize this as a valid code. In addition the P16F84.inc file contains the following definitions:
_CP_ON                       EQU     H'000F'
_CP_OFF                      EQU     H'3FFF'
_PWRTE_ON                 EQU     H'3FF7'
_PWRTE_OFF                   EQU     H'3FFF'
_WDT_ON                      EQU     H'3FFF'
_WDT_OFF                     EQU     H'3FFB'
_LP_OSC                      EQU     H'3FFC'
_XT_OSC                      EQU     H'3FFD'
_HS_OSC                      EQU     H'3FFE'
_RC_OSC                      EQU     H'3FFF'
What is the code though to select which options you want to use?

Try this code:
_CONFIG _CP_OFF & _PWRITE_ON & _WDT_OFF & _LP_OSC
I tried this in the assembler and it didn't return any error messages when compiling. I found this in a PIC Book that I downloaded off the internet.
I hope it works for you. I am new to the MCU Module and learning about it so don't consider me an expert on it by a long shot.
Have A Nice Day
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

Hi All,How to set printer configuration for sap4.7 IDES version for home pr

Hi All,
Pls provide the information How to set the configuration for our home printer from the sap 4.7 IDES version .If possible pls provide with screen shots
thanks & regards.
bharat

check SPAD (tcode) to installl Printer and all formats.
Regards
Prabhu

How to set Border in the Excel using UTL_FILE ?

Hi all,
Any one aware of
How to set Border in the Excel using UTL_FILE ?
Am doing excel creation from a stored procedure.
Thanks
Dora

Hello Dora,
if you need more than simple csv: at Re: How to save a query result and export it to, say excell? you can find links to different solutions. At least the package behind the second link supports defining your own formats (and has a tutorial how to do it).
Regards
Marcus

How to set the full screen mode using setClip method

hi all,
how to set the full screen mode using setClip in that softkeys should not be used insteat on that need to create a own softkeys using commands.
thanks & regards
Bala.

In CS5 there are changes made to how the screen mode is reported. In CS3-CS5 the screen mode has a corresponding number. So for instance if the ScreenMode is set to "Preview Off" and you ask indesign CS3 or CS4 to display the screen mode, it will report "1936552047", while in CS5 it will report "PREVIEW_OFF".
try executing this simple command in respectively CS3, CS4 and CS5 and you will see what I am talking about:
alert(app.activeWindow.screenMode);
there is no difference if you do:
alert(app.activeDocument.layoutWindows[0].screenMode);
The CS5 solution is rather awkward to work with, unless I am missing something? PREVIEW_OFF is not a string, nor is it a number.
Example - doing:
myScreenMode=app.activeDocument.layoutWindows[0].screenMode;
and then trying to reset screenMode by something like:
app.activeDocument.layoutWindows[0].screenMode= myScreenMode
does not work in CS5 of course. It will throw an error. Neither will this line work:
app.activeDocument.layoutWindows[0].screenMode=ScreenModeOptions.myScreenMode;
Any way of working around this?

How to Set "DateOnly" property in DateTimeControl using Javascript.

How to Set "DateOnly" property in DateTimeControl using JavaScript.

Is there any specific reason you want to set it through JavaScript ? You can directly set the DateOnly property in the markup itself.
<SharePoint:DateTimeControl runat=server id="dtControl" DateOnly="true"></SharePoint:DateTimeControl>
Please can you elaborate on what exactly is the requirement for setting this through javascript?
Geetanjali Arora | My blogs |

How to use the same credit card for more than one customer master

Hi,
this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
The customer does not like the idea of using alternative payer.
Did you ever face the same problem and how did you solve it?
Much Thanks in advance
Best regards
Clemens

thanks

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card? Plugging in the camera at the ipad connector doesn't seem to work, possibly due to lack of power.

This may apply.
Fix (for Nikon D800)
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
Are you using an SD, SDHC, or SDXC card? And what capacity?
 Vheers, Tom

MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

This topic has been moved to AMD64 nVidia Based board.
Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

I'm use two screens, Firefox 4 is not displaying correctlying on my second screen. How do I fix this? (I have Windows 7, 64 bit, and using an external video card)

It only happens on the screen I'm using the external video card. I'm assuming its a bug.

I think this is related to other posts, the solution at the moment seems to be to disable hard acceleration.
see here: [http://support.mozilla.com/en-US/kb/troubleshooting%20extensions%20and%20themes#w_the-problem-does-not-occur-in-safe-mode]
Similar problems
[http://support.mozilla.com/en-US/questions/786524]
[http://support.mozilla.com/en-US/questions/794823]

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

Can windows xp use a different sound card for itunes - I want to use a sound card for itunes and another for all other apps

Can Windows XP use a different sound card for itunes - I want to use a sound card for itunes and another for all ther apps

To the best of my knowledge, Windows is not capable of setting a specific sound card based on the app being used, it's all or nothing.
Try a google search or search the Microsoft site.

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

How to SET or Configure BIOS to use XFX6200 TC video card for MSI K8N NEO4 Plat.

Similar Messages

Maybe you are looking for