How to set page break for Narrative view???

Hi All,
I have created a report in Narrative view using HTML code. I am stuck how to set page break based on a column in Narrative view. If anybody is aware of the issue pls let me know how to overcome this situation. Or if this can be done using HTML code itself pls let me know how to do it.
Thanks & Regards
Thenmozhi

Hi Honey,
I am not sure on ur requirement but you can achieve page break with a column using pivot view by dragging that column into section area and editing section properties to Insert Page break option.

Similar Messages

How to set Page break in multiple tables ?

Hi ,
I have 3 tables in my SSRS report . 3 tables have different groups.
All groups are showing in different excel tabs as expected. Also dynamically generating each tab name based on the group name .
But 3 rd table group tab name not generating dynamically but taking 2nd table last group name .
In below example Johnhancock is my last group of table 2. From first group of 3 rd table onwards it will showing as Johnhancock2, Johnhancock3, Johnhancock4 etc. ( Data is correct only issue with tab name )
Note: I have used add a page break after option for all 3 tables . Please suggest if I need to change any settings.

Hi Kotim,
According to your description, you have three tables in a report with page breaks between those tables. When you export this report as excel, you have set the worksheets names showing each group name. Now you find all tabs of the third table shows the last
group name of the second table. Right?
In Reporting Service, when we export a report to an excel file, if we add page breaks for the report manually, then the report will be exported into multiple worksheets based on page breaks, and the report page names determine the name of worksheets. For
testing this scenario, we add page breaks between groups and tables, and put the group name into page name. It works fine when we export it to excel file. So we suggest you check the page name of the third table, make sure the page name is the group name of
the third table. If possible, please post some other detail information about report design. Here we also have a blog for your reference:
Report Design: Naming Excel Worksheets
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

How to set the font for table view contol

Dear All,
My requirement is to set Font type = Arial and size=1 for
Table View control. The same font should be for header, Rows and footer.
One way we are achieving it through the Renderer class. Where in we are we are supplying data, colums with html font tags.
Is there any simple way to fix font fot the entire TableView.
Thanks
Markandeya

An approach I've used is to override the CSS styles by adding code like the following to the top of the JSP page. It's a bit of a hack, but it did the job. You will need to find ALL the styles used in a table view, and override the font size.
<%-- OVERRIDE SOME CSS STYLES SO WE HAVE THE DESIRED TABLE CELL PADDING --%>
<style>

</style>

How to set page margin for any site being viewed without back and forth scrolling?

Some sites and most forums, the threads cannot be read without scrolling the screen back and forth. How can these be set where all information is read without moving screen short of up or down and not side ways back and forth.

Thank you all for attempts to satisfy my needs. The last concerning my screen is 19 inches and 800 resolution. I'm very long in the tooth and if I go higher in
resolution I have to play squint the fonts are so small. Crank them up and I'm back to scrolling back and forth on the screen.
Again thanks for help but I' m not interested in spending money on newer
haha state of the art equipment just to satisfy the need of cyber space Ad
purveyors to post their wares. Graphics I can do without as well. If they want
me to see what they have to offer, then stop messing with what once worked just fine.
I still have Word where I can do with whatever I copy n paste to get done what I need. The convenience of doing so right at the site isn't a requirement as such. Being a retired Master Electronics Technician, I'm short on computer orientations but long on other kinds of smarts.
Again, Thank you all for the help.
Gizmoman

How to set the break for repeater

Hi ,
Here i am trying to stop the repeater based on codition. But the repeater is not breaking. can any one help for break the repeater settings

Venkat,
First check whether your condition in a "Conditional" action block and if it is met, use an assignment block to assign integer 1 to the boolean "Break" of the repeater.
This will break the repeater
Best Regards,
Ajitha

How to remove the page break for CSV report

Hi,
I'm working on a rdf report and have an issue with page break.
As usual there exits a page break in the report output. how do I remove it.
work around: set Page break before/after : NO
worked on margin re-size, how ever could not resolve the issue.
Can any one help me on this.
Thanks in advance.
Thanks,
Santhosh

There are two ways to do this:
1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
<orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

How do you set page breaks

I have a 250 row spreadsheet that needs to be divided by month. I cannot find a way to set page breaks. Am I missing something? I know I can add rows to make a page break but it is tedious and everything moves if add or remove a row.
However, If I wanted to make each month a separate sheet, is there a simple way to move to different sheets.
Fran Wehman

Jerry,
Thanks! I look forward to exploring numbers some more since it has some nifty features. I really do like that one can have several objects on the same sheet at the same time. And I admit that I probably have too much MS mindset. But there's a reason for that.
The dominance of MS is a classic case of a feed-forward loop, or amplification, where a marginal increase of market share (for spreadsheet products in this case) encourages users and other manufacturers of supporting and complementary products (software companies, in this case) to tacitly accept the leader's product as the standard. Every additional unit sold hardens the case in favor of the leader. I admire Apple for bucking the trend. But it is a dangerous game.
In my own case, Jerry, your suggestion doesn't seem workable to me because of the specifics involved. It's a rowing event. The competitors are boats, but the same team (rowing club) has a number of different boats in different races with different personnel. To break all of this down to individual athletes (over 1,000) creates several orders of magnitude more work than what I'm doing now. To complexify things, teams change their personnel in the boats all the time, which changes the age averages and the handicapping involved. And some rowers get cut from the boat at the last minute and new ones added. The basic unit is the boat (which come in various configurations, as you may know: the eights, the fours, the quads, the doubles, the pairs, the singles). Following your advice, I suppose I would make each event (aka each race) its own separate table. This could work, but it requires a lot of additional work, because I'm dealing with 1,000, athletes, 400 boat entries, and 54 events.
I should add that our registration contractor provides me with the raw data in (you guessed it) Excel format.Re-parsing all that data into a boating table and then referencing that into event tables is an astronomically bigger job than the one I already have. This is why Apple's is a dangerous game. It's absolutely fine to share my output with the rest of the world, especially when I can reformat it into Excel, but I also have to deal with the output of co-workers, contractors, etc., which is more likely than not going to be in Excel. With Numbers, Apple has been trying to lure away folks from Excell by offering neat features. They really are neat. But Apple has to do something more. It has to minimize the cost (in terms of sunk labor inputs and additional effort) of flipping from a world dominated by MS. I believe it can, but it has to be able to meet its consumers where they are--stuck in an MS reality--and make the very real labor costs of converting go away, not just add neat features to entice. We all like those features. But they don't make the headache of conversion go away.

How to set different header for different Standard report page

How to set different header for different Standard report page

Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

How to set Where clause in the View Object of the MessageChoice ?

Hi,
How to set Where clause in the View Object of the
MessageChoice ?
Example:
<bc4j:rootAppModuleDef name="EdEscolaCampusView1AppModule"
definition="ed00050.Ed00050Module"
releaseMode="stateful" >
<bc4j:viewObjectDef name="EdEscolaCampusView1" >
<bc4j:rowDef name="CreateEdEscolaCampusView1" autoCreate="true" >
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="ListaTipLocalView1"
rangeSize="9999">
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
messageChoice declaration:
<bc4j:messageChoice name="SeqTipoLocalCampus"
attrName="SeqTipoLocalCampus"
prompt="Local do Campus">
<contents>
<bc4j:optionList attrName="SeqTipoBasico"
textAttrName="NomTipoBasico"
voName="ListaTipLocalView1"/>
</contents>
</bc4j:messageChoice>
I would like set where clause of ViewObject, with dinamic parameters (using attribute1 = :1), before populate messageChoice.
thanks...
Danilo

Hi Andy,
I try set a where clause using the message:
Set where Clause parameter using UIX , but my UIX Page have 2 messageChoice's of different ViewObject's, then I need implement this Java Class:
//Nome da Package da Tela Detail
package br.com.siadem.siaed.ed00050;
// Importa as Bibliotecas necessárias
import oracle.jbo.ViewObject;
import oracle.jbo.ApplicationModule;
import oracle.jbo.client.Configuration;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.servlet.event.PageEvent;
import oracle.cabo.servlet.event.EventResult;
import oracle.cabo.data.jbo.servlet.bind.*;
import oracle.cabo.ui.data.BoundValue;
import oracle.cabo.ui.data.DataBoundValue;
import javax.servlet.http.HttpServletRequest;
import br.com.siadem.siaed.util.*;
import javax.servlet.http.Cookie;
import oracle.cabo.data.jbo.def.NestedAppModuleDef;
import oracle.cabo.data.jbo.def.ViewObjectDef;
import oracle.cabo.data.jbo.def.AppModuleDef;
// Classe que configura os parametros para a execução da Query,
// utilizando variáveis de Sessao
public class FunPreQueryLista
public static EventResult FunConfiguraQuery(BajaContext context, Page page, PageEvent event) throws Throwable
// TrataDadosSessao - Classe utilizada para retornar os valores das variáveis de sessão genéricas
// Ex: CodCliente, CodMunicipio etc...
TrataDadosSessao varDadosSessao = new TrataDadosSessao();
// 1o. Parametro Configurado - Através da classe TrataDadosSessao, utilizando um método Get
// <alterar>
String valor1 = varDadosSessao.getCodCliente();
String valor2 = varDadosSessao.getCodMunicipio();
//Cria o objeto que retorna o ApplicationModule
ApplicationModule am = ServletBindingUtils.getApplicationModule(context);
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoLocal = am.findViewObject("ListaTipoLocalView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoLocal.setWhereClauseParam(0,valor1);
TipoLocal.setWhereClauseParam(1,valor2);
// Executa a Query
TipoLocal.executeQuery();
// Fim das Configurações da Query da Lista
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoDestLixo = am.findViewObject("ListaDestinoLixoView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoDestLixo.setWhereClauseParam(0,valor1);
TipoDestLixo.setWhereClauseParam(1,valor2);
// Executa a Query
TipoDestLixo.executeQuery();
// Fim das Configurações da Query da Lista
// Retorna o Resultado para a Página
return new EventResult(page);
The code works very well...
And, I'm sorry for my two repost's in UIX Forum about this in a few time.
Thank very much...
Danilo

How to set Shortcut keys for button in Apex

Hi
Could anyone help me on how to set shortcut keys for buttons in Apex.
I need to use say ALT + S to submit the page.
The following thread pertaining to HTML DB refered to use ACCESS key. but that couldnt work in my case.
Re: operation of the app. with the keyboard
Any pointers on achieving this would be helpful.
Thanks
Vijay

Hi Vijay,
I’m afraid you must do it using javascript key listener. You can’t use action() on template based buttons because they are actually not HTML buttons but images with hyperlink.
Key listener checks which key has been pressed down and invoke some JS function. For example, write this code in page header:
<script>
document.onkeydown=keyCheck;
function keyCheck(e){
     var KeyId = (window.event) ? event.keyCode : e.keyCode;
     switch(KeyId){
          case 113:
               doSubmit('SAVE');
               break;
          case 118:
               alert('Hello');
               break;
</script>
This script will submit page with request 'SAVE' if you press F2 or will show alert message if you press F7. Modify it to your issue.
Regards,
Przemek

VSTO: How to set line break in Ribbon Xml?

Hi All,
I have a button in Ribbon.xml. it looks like:
<group label="myLabel" id="View">
<checkBox id="cbView" label="ViewViewviewviewview" getPressed="cbView_Pressed"/>
</group>
The result is shown as:
The checkbox is too long. My question is : How to set line break in checkbox's label.
Thanks a lot,
By the way, in Ribbon Xml. How to add RadioButton?

Hello Ricky,
The Fluent UI (aka Ribbon UI) doesn't provide any attribute or callback for that. You can try to use an escape sequence "\n\r", but I am not sure whether it helps. Also you may consider placing a text block below the check box control.
You can read more about the Ribbon UI in the following series of articles:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

How to put Page break in SAP Script

Hi Experts,
Please tell me how to put page break in SAP Script. or give some sample code
looking forward for your reply..
Regards,
Kali Pramod

Hi,
NEW-PAGE is used to insert a page break ,
it can be conditional if used between IF..ENDIF
e.g. /:IF &KNA1-NAME1& = 'XYZname'
/:NEW-PAGE
/:ENDIF
If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
reward if useful.

How to set background color for selected days in DateChooser

How to set background color for selected days. I created
checkbox for each day [Son,Mon,Tue,Wed,Thu,Fri,Sat] and a
DateChooser, I want to change the background color for the selected
day when i click on a button after selecting the desired checkboxs
[ monthly wise/yearly wise]
Thanks in advance

There is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application>

How to set page break for Narrative view???

Similar Messages

Maybe you are looking for