How to set phone keypad lang back to English?

Hello all,
Yesterday had to restore my iPhone 6 plus 'cause it was taking forever to sync new songs into it. Anyway the restore and sync were success.
Then I discovered this little oddity (see attached pic).
If I add a new contact > add a new number > tap the + * # key (to get the + sign), you notice above the * and # keys the two keys (4 & 6 position) are in Chinese, how to I change them back to English?
Thanks.

How long your phone rings before going to voicemail is usually a setting the carrier can change on your account.  Give your carrier's Customer Service department a call and see if they can extend the ring time.
As for text notification:
You can set a longer tone by going to Settings > Sounds > Text Tone and selecting a different tone option.  If you want multiple notifications if you recieve a message and keep ignoring your phone, you can get repeat notifications at two-minute intervals by going to Settings > Notification Center > Messages > Repeat Alerts and changing how many times it will repeat.

Similar Messages

  • How do I change the language back to english as it is running in chinese

    How do I change the language back to English as it is running in Chinese?

    On your keyboard, press the CTRL and the , (comma) keys at the same time
    You will see a box like this:
    Stay on the first tab (as shown) and select the drop-down menu as arrowed
    English (UK variety) is the fifth one from the top. US variety English is the sixth one
    Select your choice and click on OK
    There will be an additional piece of text under the menu now; it simply tells you that you need to close and re-open iTunes for the language change to take effect.
    That's it!

  • How do I change the language back to english as it is running in dutch

    how do I change the language back to english as it is running in dutch in error at the moment. I have uninsatlled and reinstalled itunes to no avail

    Launch iTunes. If you don't currently have your menu bar up, go control-B to bring it up. Now from the "Berwerken" menu select "Voorkeuren...", as per the following screenshot:
    That gets you through to the preferences tabs. Now in the "Algemene" tab, go down to the "Taal" drop down menu. Select one of the two "Engels" entries (one is English UK and one is English US), as per the following screenshot:
    ... and click "OK".
    Quit and restart your iTunes and you should now be seeing English again.

  • How can I change the language back to English on Appstore?

              I just recently upgraded my Ipod touch to iOS 5.0.1 and after that the language of applications Appstore & Itunes was set to French, while everything else is in English -as it is supposed to be as before the upgrade everything was in English-.
              Currently the Language set on my Ipod is English (From Settings->General->International->Language->English).
              The account for Appstore is not linked to any credit card it is a an account to only download free applications.
                  How can I set the language back to English?
    Thanks a lot,

    Is the address on your account based in France ? The language of the stores should reflect the language of the country where your account is based, which isn't necessarily the same language as you've set on the device.
    If your account isn't based in a French spealing country, then try logging out of the account (via Settings > Store) and then log back in (and also make sure that your address is correct and complete), and see if the language of the iTunes and App Store the reflect the language of the country where your account is based.

  • HT4914 How do I switch my language back to English?

    How do i switch my la guste Back todo english in Apple store on my IPad?

    Hello Hotcoco41,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: Changing the display language
    http://support.apple.com/kb/ht2242
    No matter what you set your language to, some content on the iTunes Store (such as album names and movie names) will still display in their original language
    Best of luck,
    Mario

  • How could I turn my Appstore back to English again ? How can I get my apps back again after migration to IOS 5 ?

    Hello,
    I migrated my iPhone 3GS yesterday to IOS 5. All my apps disappeared, and, on the top of that, my Appstore turned to Dutch, instead of English.
    So, in order to sort matters out, I would need to have help for the following:
    1. Put my Appstore in the iPhone back to English, so that I can charge apps in English, not in Dutch;
    2. Get my apps back.
    Thank you for the help.
    Simone

    Hi,
    I found out after phoning apple support at least 9 times today that you can change the language of the Appstore by doing the following:
    1. Going into My Account in the Applestore, and going into 'language etc' and writing down the language you want to use (eg. English instead of Dutch). Save it.
    2. After doing that, in the iPhone itself, go to Settings/Appstore/ and click on your Apple ID. Then click on Sign Out. Then, Sign In again with your login and password details for your Apple ID. The language of your Appstore should now be the one you chose in step 1.
    I hope it works for you all. It was not easy to get to this ...
    Regards,
    Simone

  • How to have phone turn sounds back on

    One of the features that I like is the phone's ability to be put in silent mode for a set period of time.  After that time period, it resumes regular sounds.  I cannot figure out how to make that happen - have combed the manuals, etc., no luck.  Anybody know how to do that?

    I thought that can be done only with 3rd party apps, thid the first I heard that any phone did this, sre you sure thid option is on the Bionic.  I search a number of areas and found nothing on this option..

  • Apex 4 Cascading LOV's how to set a child LOV back to null return value

    Hi,
    My problem is I am using the new Dynamic Actions to implement Cascading LOV functionality in Apex 4 which means not having to submit the page to update child LOVs after parent LOV changes.
    What I am finding is that when you change the parent LOV value then the child LOV (which has a null return value) is not defaulting to the null return value (in my case no selection should return -1) if its list is filtered to a different set of values which doesnt have a valid selection. The child LOV is left without a selection when I need it to default back to the null return value (-1, representing all values).
    Also I was hoping to do this before the page is submitted so the filtering down the hierarchy of LOVs will work where the child is null (-1, meaning all values) and in turn its child LOV(s) will filter also from the null child value.
    Any help would be much appreciated.
    Thanks

    Hi 804641,
    I'm not sure if I get your problem and I tried to reproduce it.
    http://apex.oracle.com/pls/apex/f?p=2672:6 is my example with a cascading LOV where I have also defined a dynamic action which fires when P6_EMPNO changes and it shows the current selection.
    Maybe it helps if you setup an example on apex.oracle.com and provide the workspace/user/pwd so that I can have a look. I'm also not sure about your sentence "using the new Dynamic Actions to implement Cascading LOV functionality", because dynamic actions are not needed for cascading LOVs. It's a feature of the item types themselves where you just have to set the "Cascading LOV Parent Item(s)" attribute.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • How do set up Favorites to back up automatically (eg weekly)?

    I would like to set up my Firefox browser so that it automatically backs up my Favorites file once a week. I have been doing the manual backup, but I sometimes forget.

    Did you try Firefox Sync?
    * firefox.com/sync
    read [[What is Firefox Sync]] article for more info

  • How to set the timescape module back on home screen using ADWlauncher

    I'm using the ADW launcher replacement and with the new update there is no way to place the working widget with tiles on the homescreen again.
    There isn't a widget available either in the widget listing.
    How can I solve this so I have this common widget back on my homescreen?
    Many thanks,
    PtR

    Indeed it only works with Sony's launcher
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How to set phone number format like start with 0 or + it is not allowing

    Hi All,
    We Are trying to give in phone number field as number start with 099235623 or +91- like that
    but it is not allowing to chage format
    it is taking 99235623 eventhouh we entered as infront of zero
    our requirement is we need to enter zero also
    please give any idea
    Thanks
    Rio

    Hi,
    First Check the Data Type of the Field. That must be "DTYPE_PHONE". If this is the Data Type, then, it will allow the phone format set at the Locale Level for the Application. Check the Format at Locale Level.
    [OR]
    It's simple, you can change the Data Type of the particular Field to "DTYPE_TEXT".
    Regards,
    Joseph ArulDass

  • How can I change the language back to English on AppsGoneFree App?

    While on the  "Apps Gone Free" app I have downloaded on my iPhone, I accidentally hit something that changed the language from English to another language and I can't tell how to change it back. I can't find anything I hit to be able to go back to. I don't want to repay to download it again, so if any one has any idea I'd appreciate it. I even tried finding out how from the googled site, which I think took me to iTunes.

    I just figured it out.  tap on the title bar at the top of the screen where it says "AppsGoneFree".  it brings up the language setting menu!

  • How to set region as thai with language english

    it used to be like that when I first turned it on. Then I mess with the setting and it's gone. The region setting was "Thailand (English)" but now it is "Thailand (Thai)". is there anyway to change it?

    Anything in this KB article helpful: 
    DVD region codes

  • How do I change Arabic headings back to English?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/787601]''
    Arabic headings appear after the Globe at the top left of the Firefox browser. (http://english.aljazeera.net/)

    Launch iTunes. If you don't currently have your menu bar up, go control-B to bring it up. Now from the "Berwerken" menu select "Voorkeuren...", as per the following screenshot:
    That gets you through to the preferences tabs. Now in the "Algemene" tab, go down to the "Taal" drop down menu. Select one of the two "Engels" entries (one is English UK and one is English US), as per the following screenshot:
    ... and click "OK".
    Quit and restart your iTunes and you should now be seeing English again.

  • Every so often a website will come up in a different language, how do I change the language back to English?

    1 of the websites is: Playflock.com. I'm clicking on the links thru Facebook.

    Ah, AZ1sherri and Moses I think this will depend on the website. There are two add ons I use sometimes [https://addons.mozilla.org/en-US/firefox/addon/google-translator-for-firefox/] and [https://addons.mozilla.org/en-US/firefox/addon/quick-translator/]

Maybe you are looking for

  • Popup message for down payment

    hi, regarding down payment, system will show the popup message while entering FB60 and MIRO, the same popup message is it possible to shown while doing F-53 & f-58 to vendor. govind.

  • How to convert Report Builder output to .XLS

    Dear All, Let me please know how to convert the Report Builder output to Excel Format. As there are having the facility to convert the output in .PDF or .HTML format but i want to convert that into Excel Sheet...... Please Guide me in this regards Th

  • Set textSelectionColor of itemrenderer in my combobox

    Hi all, First of all, all apologies if this question were already discussed around. I serached and found nothing. On the web, all that I have found didn't really help. I defined an itemRenderer for a combobox <mx:VBox xmlns:mx="http://www.adobe.com/2

  • LabVIEW Font Problem

    I am using LabVIEW 2013. While using the DAQmx I am facing issue with Fonts. Take a look at screenshots which I have attached.

  • Web based access

    Is there a way to setup an email service so people can access there e-mail through logging in on a website using the Xserve?