How to set pop3 server timeout in Mail?

The pop3 server that I am using for receiving my mails responds quite slowly. So, I have to increase the server timeout flag, but I couldn't find it in the preferences of Mail. Have you got any ideas about that?
Thanks...

You should probalby post your question in the Mail and Address Book forums:
http://discussions.apple.com/forum.jspa?forumID=753

Similar Messages

  • How to set SQL Server Login MUST_CHANGE, CHECK_POLICY, CHECK_EXPIRATION all to OFF with T-SQL

    How to set SQL Server Login MUST_CHANGE, CHECK_POLICY, CHECK_EXPIRATION all to OFF with T-SQL.  SSMS will not allow me to change policies to OFF. Error: 15128 - The CHECK_POLICY and CHECK_EXPIRATION options cannot be turned OFF when MUST_CHANGE is
    on.  I am attempting to change these options in a test environment. Thanks, Richard

    It appears you have to change the password first(it could the same password but an alter command needs to be done)
    check this : http://www.sqldbadiaries.com/2010/11/07/the-check_policy-and-check_expiration-options-cannot-be-turned-off-when-must_change-is-on/
    http://sqldbpool.com/2012/10/08/the-check_policy-and-check_expiration-options-cannot-be-turned-off-when-must_change-is-on-microsoft-sql-server-error-15128/
    Hope it Helps!!

  • How to set the keepalive timeout and nativepoll in application server 8.2

    Hi,
    I would like to know how to set "keepalive timeout" and "nativepoll" on application server 8.2.
    Thanks,

    These parameters were set in Application server 7 as per the following documentation:
    http://docs.sun.com/source/817-2180-10/pt_chap4.html
    However I am not able to find any documentation with regards to application server 8.2
    Please advice..
    Thanks

  • How to set the flag of the mail when I read it for POP3

    HI,
    All
    I know that POP3 does not support the flags. As per my knowledge the only flag POP3 supports is the DELETED. if i am not wrong.
    Now what i have to do is when i fetch the mails programmatically and once i read that I want to mark that mail as read in the yahoo also. means when i reterieve the mails through my client from the yahoo mail and next time when I Open the yahoo account the mail that i have retrieve must be seen as read rather than unread.
    Yahoo uses the POP3 Server for the incoming mails the same thing also happens with outlook you can find that outlook also uses POP3 as the incoming mail server and when we reterieve the mails from the yahoo using the outlook by some way Outlook marks the mails on the yahoo server as read the same thing I have to do for my client Program using the POP3 server.
    If Outlook does it dispite of the POP3 server there must be some way to do the same thing for the POP3 server using the Java Mail Api.I dont know how to do that thing and mark the mails as read once I fetch them.
    Any Help is appriciated,
    Rahul.

    I have tried to access the content of the message using the my program to fetch the mail but still Yahoo does not mark it as the read in its web interface.
    so I want to know how to do that. and also want to know that when you are doing same thing for the outlook then it mark it as a read on the Yahoo web mail interface so I want to know how do they do it means how Outlook mark it as a read mail on the yahoo server despite of the POP3 server.
    If anybody knows how outlook does that than we can do same using the Java mail Api.
    Regards,
    Rahul

  • How to set expiry date for a mail account?

    Hi there, i'm new in Messaging Server, need help here on how to set an expiry date to a specific mail user since the mail user will be just a temporary mail user. Instead of deleting manually, is there any smarter way of doing it?

    Directory Server can be set to exipre a password, indeed. That will prevent the user from logging in, when it happens. There will be no warning, or anything like that.
    The account will still be on the server, and the mailbox will still contain mail. It will still receive mail.
    If you want to turn an account off, you will have to make some arrangement outside Messaging Server for automating it.
    You can use any kind of program you like to set the ldap attribute "mailuserstatus" to "inactive", or even "deleted" as you wish.
    You can use java, "c", or any other programming tools you like. Messaging Server and Directory Server aren't written in Java, anyway.

  • How to set dynamic name of the mail attachment according to source file ?

    Hi,gurus:
    Our scenario is like below:
    Sending files from an FTP server to another FTP server without using the integraiton repositary,and the file name is not changed .Now, we want to also send the file to some with by mail adapter.The scenario  now works by using two business services in receiver determination.But the name of the attachment is "untitled.xml".We know how to set the file name staticly,but how to set the name dynamicly according to the source file name ?
    I have checked miachel's blog "XI: Dynamic name in the mail attachment - pseudo "variable substitution"(/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution),but how can I get the source file name?
    And another question:Must we restart the adapter or j2ee engine to make the user defined module work?

    Hi,
    >>>but how can I get the source file name?
    form dynamicconfiguration (ASMA)
    >>>And another question:Must we restart the adapter or j2ee engine to make the user defined module work?
    no need for a restart
    Regards,
    Michal Krawczyk

  • How to set up delayed sending with Mail ?

    Since I am not allways internet connected, I would like in Mail to send my mail only when I am connected, or to decide by myself when to send mails.
    How to set up this fonction ?
    Or how to do with Mail when I am not permanently conncetd to internet ?
    Than You

    If you are not connected to the internet when selecting Send for a message, you will receive the following error message.
    Error
    This message could not be delivered and will remain in your Outbox until it can be delivered.
    The server "the account's SMTP server here" cannot be contacted on port 25 (or whatever Server Port is used by the account's SMTP server).
    When connected to the internet and launching Mail, all messages that remain in the Outbox mailbox will be sent automatically.
    No other setting is required but if you select Send for a message when not connected to the internet, you cannot prevent any messages from being sent that remain in the Outbox when connected to the internet and launching Mail.
    If you want to decide when to send messages that were composed when not connected to the internet, save the messages as a Draft. Open the saved Draft message and select Send.

  • RMI - How to set a client timeout?

    Hey folks,
    please don't crucify me, but i googled for "rmi client timeout" and i only found confusing and / or really dated information.
    Could somebody enlighten me on how to set a timeout for an RMI-client?
    Even an RTFM would be fine, but which?

    Hi,
    thanks for your insistence.....:-)
    ejp wrote:
    1. Are you using rmic? UnicastRemoteObject? or some JBoss API?Ehm, for the client?
    The client's sourcecode for connecting to the Jboss-Server / my EJB-application is:
    Hashtable<String, String> props = new Hashtable<String, String>();
    props.put(Context.INITIAL_CONTEXT_FACTORY,"org.jnp.interfaces.NamingContextFactory");
    props.put(Context.PROVIDER_URL,"jnp://" + "myhost");
    props.put(Context.SECURITY_PRINCIPAL, "myuser");
    props.put(Context.SECURITY_CREDENTIALS, "mypassword");
    Context ctx = new InitialContext(props);
    // get RMI stub
    ISendCommand sendCommand = (ISendCommand) ctx.lookup(myjndiname);
    String result = sendCommand.sendCommand(myArgs);So i think this corrensponds to "UnicastRemoteObject" from your enumeration?
    ejp wrote:
    2. How do you know JBoss terminates the connection?Because i have a timeout configured in my EJB-application, but in the example i try to get working, the client shall use its own timeout which is before the EJB-timeout.
    The EJB-timeout works, but not the client timeout.....(as described above)
    ejp wrote:
    3. What happens at the client? An exception? Nothing?"Nothing", i.e. the client terminates when the connection times out (from the JBoss / EJB-side!)
    ejp wrote:
    4. Are you ignoring any exceptions at the client?No.
    Shouldn't this client timeout be totally independent from any server / Jboss / whatever stuff?
    Any more ideas?

  • How to set up two POP e-mail accounts using the same POP and SMTP servers

    I have an e-mail address based on a domain I purchased which is based on my company name. Now retired, I have purchased a new domain with a simpler, personalised name. My original e-mail account uses the incoming (POP3) and outgoing (SMTP) mail servers operated by my ISP; mail.btinternet.com.
    I have set up a new account on my PC in Microsoft Outlook, and have successfully sent and received emails using the new e-mail address taken from my new domain name.
    I have now tried to mirror this on my iPhone, but every time I enter all the relevant data for the new e-mail address, user name, password, mail servers etc., and then press 'save', I get a pop-up which says: "xxxx" is Already Added  This POP account has already been added to your iPhone. ("xxxx" is the name given to my original e-mail account).  Nowhere have I input "xxxx" in the course of setting up the new account.
    I need both accounts operational during an extended switch-over period as I alert everyone to the e-mail change over. Can anyone suggest a solution to this problem?

    What targeting the Mail.app preference file, do the following:
    Quit the Mail.app first and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
    Using the Finder, go to Home > Library > Preferences > com.apple.mail.plist. Move the com.apple.mail.plist file to the Desktop.
    Note: Moving the com.apple.mail.plist file out of the Preferences folder will require re-entering all email account information when re-launching Mail.
    The only exception to this is if you have a .Mac account which will be recreated automatically and/or if you created an email account as part of the computer setup assistant when first turning on the computer when new.
    Launch Mail and decline any prompt to import mailboxes. After re-entering all email account information, the Mail.app should rediscover the existing account named folders and mailbox files at Home > Library > Mail.
    After confirming all mailboxes were successfully rediscovered, you can delete the copy of the Mail folder and old com.apple.mail.plist file from the Desktop.
    Test if this resolves the problem.

  • How to set tomcat server path in windows XP

    hi frnds,
    I am new to java technologies.I am trying to learn all alone Hw am wandering how to set class path of tomcat server in windows xp.
    it shud be in user varibles r system varibles
    Thanks everyone in advance,
    cheers........
    roopa

    What exactly are you trying to accomplish here?

  • How to set proxy server name in iasenv.ksh?

    How to set the proxy server host and port in the JAVA_ARGS list in the iasenv.ksh file? IAS 6.5 is the server being used.

    hi,
    Below is what needs to be done.
    1. Edit the variable JAVA_ARGS in iasenv.ksh to include the -Dhttp.proxyHost. For example, the JAVA_ARGS looks like this : JAVA_ARGS="-Xss512k -Xms64m -Xmx64m -Dhttp.proxyHost=proxy.myhost.com -Dhttp.proxyPort=8080"
    2. This JAVA_ARGS is the one under the kjs script settings. You will find this below the comment ## Set all user level JVM flags for KJS here.
    3. Now stop and restart the application server.
    4. Any new URL connections from the servlets/applications within the appserver will now go through the proxy server.
    I have tested this on iAS6.0 SP3. But this should work in 6.5 too. Please let me know if this helps.
    Cheers,
    Vasanth

  • How to set content-type for outbound mail in BCS

    Hey everybody,
    can anybody please give me a hint how to set the content-type for outbound email in ABAP using BCS to send mail.
    By default the content tyoe is set to text/html. I need other.
    Best regards
    Roman

    //add related mutip-part to combine parts
    MimeMultipart multipart = new MimeMultipart("related");
    //attach a pdf
    messageBodyPart = new MimeBodyPart();
    fds = new FileDataSource("h:/something.pdf");
    messageBodyPart.setDataHandler(new DataHandler(fds));
    messageBodyPart.setFileName(fds.getName());
    multipart.addBodyPart(messageBodyPart);
    //add multipart to the message
    message.setContent(multipart);
    //send message
    Transport.send(message);

  • How to set the Server CLASSPATH?

    Hi all Oracle Java experts,
    I know this is a rather stupid questions:
    Where can I set the CLASSPATH of the Servlet Engine in Oracle 8.1.7.?
    I spent hours now searching the documentation and found loads of hints what to add to the CLASSPATH in which circumstances, but not how to... Of course I know how to use the CLASSPATH in a normal Java environment, but not in the OSE.
    In the "Oracle8i Application Developer's Guide - XML" it says in the "Using XSQL Servlet" Chapter:
    "How you set the CLASSPATH of the web server's Servlet environment and how you associate a Servlet with a file extension are done differently for each web server. The XSQL Servlet's Release Notes contain detailed setup information for specific web servers you might want to use with XSQL Pages."
    Unfortunately, the Release Notes contain this information for Tomcat, Apache JServ etc., but not for Oracle's own Servlet Engine... Maybe you should include that information.
    Thanks for any help;-)
    Cheers
    Olaf
    null

    Not sure if I understatnd the context in which you want to set your classpath.
    IDE, java or system but ...
    look at the profile file /etc/profile
    CLASSPATH= "/usr/local/jdk1.4......"
    export CLASSPATH
    or
    javac -classpath .;/usr/local/jkd1.4.... test.java
    or
    whatever your ide provides.

  • How to set up read receipts in mail on OSX Mavericks

    How do you set up read receipts in mail on OSX Mavericks? I've looked under settings for the mail app but can't see anything that I can 'turn on' to get an indication when an email has been read. Thanks for any responses in advance.......

    Hi, there.
    Unfortunately, there's no such feature on Mail. No version of it has ever had.
    Besides that, read receipts are not good at all. It is up to the recipient whether or not to send a receipt. So you will never know if the recipient never read the email or just didn't send a receipt.
    Yours.
    JP

  • How to set wamp server time?

    Downloaded the most recent version of Wamp (Apache 2.2.11 , PHP 5.3.0,  MySQL 5.1.36)
    Server time is 5 hours later than my local time (America, Chicago)
    Where can i change the time settings?
    thanks for your help,
    -Jim Balthrop

    This might help...
    http://www.dedyisn.net/2009/02/how-to-setting-default-time-zone-in-apache-webserver-for-ph p/
    Lawrence Cramer - *Adobe Community Professional*
    http://www.Cartweaver.com
    Shopping Cart for Adobe Dreamweaver
    available in PHP, ColdFusion, and ASP
    Stay updated - http://blog.cartweaver.com

Maybe you are looking for