How to set quality status of a request in an infocube by a function module
Hi folks,
in the maintenance of an infocube you have the possibility to go to a dialog called "maintenance of the automatism". That dialog allows you to set a flag therewith the quality status of a processed request is set automatically to green.
Does anybody know how to do that with a function modul or which tables have to be updated in order to do that by a litte ABAP?
Thanks+Cheers, Thomas
Hi Bhanu,
thanks for that one, pretty helpful.
Think of the following scenario:
1. untick the automatic setting of the quality status
2. load 4 requests into the infocube
3. once last request has been loaded tick the automatic setting of quality status
would that mean that once the status flag is ticked all 4 requests become available for reporting?
Cheers, Thomas
Similar Messages
-
How can we see status of all Requests at a time using any tables?
How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
Now is there any T-Code or Table to view all requests in a single shot.
Thanks in advance,
RajHi Go for RSMONICDP give timestamp and u'll have it.
Please assign points if useful
Edited by: Aadil on Jan 21, 2008 7:43 AM -
How to set up for user's request to go through a specific module that i selected
I am testing if it is possible all requests from users should go through a module
that i made or not.
For example, all most web server is setted all requests should go through the
log module for writing log when users request a certain page.
Like this, how to set up the configuration all request should go through a certain
module.
Would you tell me the answer please.Power on the Time Capsule for a few minutes, then hold in the reset button firmly with a ball point pen or something similar for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Connect an Ethernet cable from one of the LAN <--> Ethernet ports on the back of the Uverse router to the WAN "O" port on the Time Capsule
On your Mac, open up Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on the Time Capsule
The setup utility will open up automatically and take a minute to analyze the connections then suggest a setup on a screen that looks like this:
Type in a simple name that you want to use for the Wireless Network Name
Type in a name that you want to use for the Time Capsule device
Type in a password
Verify the password
Click Next
The utility will set everything up for you in a minute or two. When you see the message of Setup Complete on the screen, click Done
You can now log onto the wireless network that you created by selecting the name and entering the password
Post back on your progress and we will next get backups going again -
In Standard Report Of ALV How Can Set PF Status.
In Standard Report Of ALV How Can Set PF Status.
Thanking in anticipation.in the call function module, you pass the PF status parameter.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
<i> <u> i_callback_pf_status_set = 'SET_PF_STATUS'</u></i>
it_fieldcat = fieldcat
is_variant = disvariant
is_layout = layout
is_print = print
i_save = 'A'
it_events = eventcat
it_sort = sortcat
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = a_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "LIST_DISPLAY
FORM SET_PF_STATUS *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'ZZSTD'.
ENDFORM. "set_pf_status
Here double Click on ZZSTD. IT will take you to a different screen and you have to set it.
Ster. -
How to set the status for a customer plan to RELEASED.
Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha. -
How to set 'error' status with DB poll Adapter in OSB
1. Configured DB Adapter to poll rows with status 'notprocessed' and set the status to 'processed'
2. Configured FTP Adapter to write fetched rows from DB into a CSV file
Now my requirement is if any error like FTP server is not available, how to set the status in DB table to 'error'Yes Vlad you are right, this will avoid another DB connection created in Error Handler.
I hope this will provide some lights on the usefulness of "Transaction"
http://www.nysolutionsltd.com/transaction-handling-in-oracle-service-bus/
http://kd-blog-tech.blogspot.com.au/2010/12/transaction-management-for-osb-service.html
Regards
RK
Edited by: RK.. on 27/03/2013 17:10 -
How to Set User Status of Sales Order at item level.
How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AMMathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck! -
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate subject in your message thread. >
Hi ...
How to set custmer master blocked for posting & how to set the status has deleted. please provide the steps for the above two actions.
thanksHi,
U can use T-code FD05 for Blocking the customer and
T-code FD06 in order to set for deletion,
Assign Points if useful,
Regards, -
Hi
How to set the status of user defined form as "closed" . I have one form, i want that form should not be editable after one condition is true. Can anyone tell one solution
Advance Thanks
jintuHiii,
Use this
Sub FormDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean)
Try
Select Case BusinessObjectInfo.EventType
Case SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD, SAPbouiCOM.BoEventTypes.et_FORM_DATA_UPDATE
If BusinessObjectInfo.BeforeAction = True Then
objForm = objMain.objApplication.Forms.Item(BusinessObjectInfo.FormUID)
ElseIf BusinessObjectInfo.ActionSuccess = True Then
If BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_UPDATE Then
End If
End If
Case SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD
If BusinessObjectInfo.ActionSuccess = True Then
objForm = objMain.objApplication.Forms.Item(BusinessObjectInfo.FormUID)
objForm.Freeze(True)
If (objForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE) Then
if objForm.Item.Items("Status").Value.equals("Closed")= True
objForm.Mode = SAPbouiCOM.BoFormMode.fm_VIEW_MODE
End If
end if
End If
End Select
Catch ex As Exception
objMain.objApplication.StatusBar.SetText(ex.Message)
End Try
End Sub -
ODS Problem - Could not forcefully set the status of the request
Hello GURUS!
We encountered an error while activating an ods object:
<i>"Request REQU_41H61CY8SUS7IX4787ARFXLOM (activation request ODSR_41I8ZUA35YKRALSBFPBB0GWZQ) is marked as incorrect for data package 000000 (DP 0 is the entry for the entire request, which is the only one to remain in the control table after successful activation)."</i>
We tried to forcefully set the status to <b>green</b> as what we normally do when this happens but it still stays <b>red</b>.
Need your help on this!
Thanks,
JeffreyHello JeFFreY,
how r u ?
You can delete that failed request, then check the PSA for errors, if errors are there delete the PSA data.
Carry on a new data load with the option in the Scheduling screen -> PROCESSING tab as ONLY PSA. Now check the data for the errors and change it if error exists. Then give context menu on the request and select Start the Update Immediately. Now see in the ODS. what happens ?
Best Regards....
Sankar Kumar -
How to set window.status when returning to a page with back button/list?
It is easy enough to set window.status to application-oriented information when loading a page: do it in a function which is the onload handler for the page's body element. But, when returning to this window from another window with the second window's back button, or selecting the first window from the second window's back list, window.status gets set to browser-oriented information, usually the string "Done". Is there any means by which I can set window.status to application-oriented information when returning to the window via another window's back button/list? What would be really great is if there is an event handler like this:
window.onreturnviaback = onreturn_via_backhandler;
Any ideas?How about:
- (void)viewWillAppear:(BOOL)animated
I use that a lot. -
How to set the status when Idoc fails
Hai ,
I created Idoc extension & created a segment under that(Delivery related).
My requirement is,
if certain data not found,
Idoc should fail with text"Shipemnt for delivery <del. No> not found.
Could you please help me how to do this?
I checked the table EDIDC table but the above mentioned status is not there.
Thanks & Best Regards,
Bhaskar.you need to set the status using IDOC_STATUS
where ever error occurs populate the status table.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51' ." if it is inbound
IDOC_STATUS-MSGTY = Message-type.
IDOC_STATUS-MSGID = message-id.
IDOC_STATUS-MSGNO = message-MSGNR.
IDOC_STATUS-MSGV1 = message-MSGV1.
IDOC_STATUS-MSGV2 = message-MSGV2.
IDOC_STATUS-MSGV3 = message-MSGV3.
IDOC_STATUS-MSGV4 = message-MSGV4.
* IDOC_STATUS-SEGNUM = ?????????????????
* IDOC_STATUS-SEGFLD = ?????????????????
* IDOC_STATUS-UNAME = ?????????????????
IDOC_STATUS-REPID = SY-REPID
* IDOC_STATUS-ROUTID = ?????????????????
APPEND IDOC_STATUS. -
Hello,
I have a course built in Captivate 3 that automatically moves to completed within our LMS when users open it. How can I set the status to not change until users have gone through the entire course? Any ideas?
Thanks!Hi Shannon,
In our LMS this occurs if I add the SWF as a Flash file when I upload to the LMS. However, if I enable reporting on the Quiz Preferences pages in the Captivate file before publishing and then import it as a SCORM package in the LMS it uses the LMS customization settings on the Quiz Preferences page to track and set a completion status. -
How to set workflow status when workflow manually cancelled?
Hi All,
When i manually cancelled designer workflow, then status comes as 'cancelled'. Instead i need to set different status. How to achieve this?
Thanks in advance!You can use this action
Set Workflow Status
This action is initially displayed in a workflow step as Set workflow status to Canceled. Use this action to set the status of the workflow. The default options are Canceled, Approved, and Rejected.
You can enter a new status value in the dropdown in the action. Once you enter a status value, the entry is automatically added to the dropdown list. For example, you can enter a status that is more user-friendly and informative than Completed or Canceled,
such as Expense Report Approved.
NOTES
You cannot rename or delete a status value once it has been created. However, you do not have to use it.
A custom status is applicable to the current workflow only, and cannot be used in another workflow.
A workflow cannot use custom status values that you define in the action if the action is used inside an impersonation step.
If the Set Workflow Status action is the last step in your workflow where you have also used a custom value, you can see your custom value in the Status column in
the list upon workflow pausing or completion.
Following is an example of what the action might look like in a workflow step,
Set workflow status to Specification status: Ready for Design Review
http://office.microsoft.com/en-in/sharepoint-designer-help/workflow-actions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376961.aspx
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin -
How to set the status of an Workitem, while processing?
Hi,
My requirement is to set/ Change the workitem status after/ while procecssing if certain condition is not met for all the users. I have one workitem assigned to multiple users. If any one of the user's executes the workitem, it displays a zprogram, but the user has not taken any action (SAVE), he simply came out of the transaction using "BACK" button. Here the Workitem has been vanished/disappeared from the other two users Inbox, and the workitem is in "In Processu201D Status for the User who executed the workitem. But my requirement is to set the workitem to be in "READY" status for all the users to whom the workitem is assigned; until the user "SAVE" the transaction I need the workitems to be in "READY" status only.
Please suggest me with your ideas to get the above results.
Note: I have used the function modules u201CSAP_WAPI_SET_WORKITEM_STATUS (or) SWW_WI_ADMIN_READY ", to change the status of the workitem while processing, it's throwing an error u201CWork item & locked by user & (enqueue erroru201D.
Thanks in advance,
Ajay KumarThanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
L_STATUS TYPE SWR_WISTAT-STATUS,
L_NEW_STATUS TYPE SWR_WISTAT,
L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
RECEIVING
RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
EXPORTING
WORKITEM_ID = LCL_L_WID
STATUS = L_STATUS
USER = SY-UNAME
LANGUAGE = SY-LANGU
DO_COMMIT = 'X'
IMPORTING
NEW_STATUS = L_NEW_STATUS
RETURN_CODE = SY-SUBRC
TABLES
MESSAGE_LINES = L_SWR_MESSAG
MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa
Maybe you are looking for
-
How to retreive data from disabled iPhone 4
Hi. I have permanently disabled iPhone 4. it is my wife`s phone who passed away. i need to get photos and videos from the phone. The original computer which i synced it with doesn't help. I have 2 computer and don't remember which one was that i syn
-
I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display
-
I just imported my library from another computer and I got multiple copies of each song. All of the duplictes had a ! in the margin. Is there a way to delete all of these duplicates in my library at once or do I need to spend hours deleting them one
-
Lost ability to stream iTunes with airport express
I have a mid 2007 iMac using a Time Capsule for backup and Wifi and an airport express hooked up to my house audio system for airplay. Just upgraded to Mountain Lion and lost the ability to stream iTunes to my audio system. External speaker icon and
-
Hi all, i am trying to reformat my macbook seen a thew videos on how to do it. But does it erase the drivers for sound etc... and could some one please post on how to do this in more detail... many thanks..