How to set queue names dynamically for MQ Adapter - SAP XI

Hi Friends
  I have a scenario where I should send a message to multiple queues ( more like broadcasting ) using a single communication channel of MQ Adapter. The scenario is like this
1. If the message content contains value '111' then message should go into Queue A, Queue B, Queue C
2. If the message content contains value '222' then message should go into Queue A, Queue B
I will store the content values inside a table ( value and queue names ) and can pick it up inside BPM but want to know how to change the queue name property of MQ series adapter. I will do this inside a loop so the message can be sent to multiple queue names but want to know how to change the queue name property of receiver communciation channel.
I appreciate the help in providing the answer.
thanks
Kannan

Amaresh
  Thanks for your answer but my question is specifically targeted towards MQ adapter and the queue name which has to be dynamically changed. I can do the dynamic changes for file adapters but want to know how to change the queue names in message mapping or inside BPM.
regards
Kannan

Similar Messages

  • Set Queue name dynamically in MQ adapter

    Hi,
    Kindly suggest, how to set Queue name dynamically in Mq adapter.

    Hi Ajay,
    Thanks for your response.
    Below mentioned property value works fine for JMS adapter.
    Am looking for the property name of MQ adapter.
    Tried to set the queue name to the property jca.mq.ISpec.EnqueueMsgToQ and failed.
    Could you please provide the property name for MQ adapter

  • How to set database name default for oracle discoverer 10g

    Hi
    Do you have idea of setting the database name default for oracle discoverer 10g

    I mean to say while login to discoverer 10g, it will ask for following options. In this Database should select the database name by default instead of any value
              User Name
              Password
              Database
              End User Layer

  • How to set queue name thru JCD

    Hi All,
    I have a scenario where depending on Input message type tag I have to send message to respective queue.
    Please advise me on this if any body have idea / worked on it.
    Thanks in advance.

    Then remember to add a "dummy" queue to your Connectivity Map, as you can't left it unspecified. Usually connect it to a "qDummy" or whatever, which in reality is never used, but CM always needs one for configuration or your deployment will fail.

  • Set Output Dir Dynamically for File Adapter

    Hi,
    How can we set the output dir depending on a variable from the BPEL process the to write a file to a dynamic directory?
    As we can do for the filename...
    Please advise
    Thanks
    JO

    judging by the lack of responses to your post, i think it's safe to assume that it is not currently possible to dynamically set the directory used.
    Toby

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

    Hi Friends,
    How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
    External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
    In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
    We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
    997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
    Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
    Appreciate your valuable answers!!
    Thanks,
    Amirineni

    Amirineni,
    AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
    Alternatively, if this is a must requirement, you can generate the FA from backend and  send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

  • Overwriting AQ Queue name dynamically in OSB

    Hi,
    Can any one please help me on this.
    Is there any way we can overwrite the AQ Queue name dynamically at runtime in OSB . I copuld see that its a property within the .jca file. Is there any way we can overwrite it at run time.
    Thanks,
    Naveen

    you could add routing options to overwrite the URI on runtime.
    or use dynamic routing if you have seperate business services for the aq endpoints

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

  • Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

    Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

    You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

  • How to set-up a Timestamp for BI Delta Load in 0CLM_INVOICE datasrc at R/3?

    Hi Experts,
    Kindly let me know How to set-up a Timestamp for BI delta load at R/3 for the Data source 0CLM_INVOICE ?
    Since the Timestamp for Upload of BI Delta is " . . : : ", we are not getting any delta value to BW.
    I would like to know in where we need to maintain the DATE & TIME to fix the above problem.
    Thanks.
    Regards,
    Jayaprakash J

    Dear Jayprakash,
    Chech the below links, it may help you in your case :
    Re: 0FI_AA_11 Delta load failure
    http://wiki.sdn.sap.com/wiki/display/BI/GeneralErrorIn+BI
    Actaully you need not have to maintain the timestamp. Just try to replicate your datasource and the try to load the delta again.
    Hopefully it will work.
    Regards,
    Rahul
    Edited by: Rahul on Dec 10, 2010 10:23 AM

  • How to set a new value for formula field in crystal reports xi?

    <p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text =  "&#39;Subreport Formula&#39;"  or</p><p>crxSubreport.FormulaFields.Item("description").Text =  "&#39;Subreport Formula&#39;"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>

    Hi,
    This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
    Regards,
    <p>Blair Wheadon</p>
    <p>Product Manager, Crystal Reports</p>

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

Maybe you are looking for