How to set QuickTime Streaming server6.0.3 support IPV6?

hi,
Can QuickTime Streaming Server 6.0.3 support IPV6?
What settings should i do for QuickTime Streaming Server 6.0.3 to support IPV6?

Hello ECase,
i known my answer is probably too late but maybe it can help others who are having the same difficulties. My setup looks almost like yours and I did the same steps as you did. Unfortunately with exactly the same results.
What helped in my case was to change the teaming mode.
These are the modes available in CentOS:
mode=0 (Balance-rr) –
This mode provides load balancing and fault tolerance.
mode=1 (active-backup) –
This mode provides fault tolerance.
mode=2 (balance-xor) –
This mode provides load balancing and fault tolerance.
mode=3 (broadcast) –
This mode provides fault tolerance.
mode=4 (802.3ad) –
This mode provides load balancing and fault tolerance.
mode=5 (balance-tlb) –
Prerequisite: Ethtool support in the base drivers for retrieving the speed of each slave.
mode=6 (balance-alb) –
Prerequisite: Ethtool support in the base drivers for retrieving the speed of each slave.
Mode 0 -4 worked great while mode 5 and 6 don't work at all. So if you try bonding on a CentOS guest in Hyper-V keep mode between 0 and 4
Regards

Similar Messages

How to stop QuickTime Streaming messages in secure.log?

The secure.log of the server is flooded with these kind of messages:
Jan 25 12:13:08 server com.apple.SecurityServer[41]: Succeeded authorizing right 'com.apple.server.admin.streaming' by client '/usr/sbin/QuickTimeStreamingServer' for authorization created by '/System/Library/CoreServices/ServerManagerDaemon.bundle'
Jan 25 12:13:40: --- last message repeated 13 times ---
Jan 25 12:13:40 server com.apple.SecurityServer[41]: Succeeded authorizing right 'com.apple.server.admin.streaming' by client '/usr/sbin/QuickTimeStreamingServer' for authorization created by '/System/Library/CoreServices/ServerManagerDaemon.bundle'
Jan 25 12:15:03: --- last message repeated 7 times ---
Jan 25 12:15:03 server com.apple.SecurityServer[41]: Succeeded authorizing right 'com.apple.server.admin.streaming' by client '/usr/sbin/QuickTimeStreamingServer' for authorization created by '/System/Library/CoreServices/ServerManagerDaemon.bundle'
Jan 25 12:15:34: --- last message repeated 3 times ---
I have tried to adjust the idle time setting in /Library/Preferences/com.apple.servermgrd.plist to 300, the supposed Maximum above which idle time defaults to 60 seconds. In my experience this initially works after which the flooding starts all over. The default interval is also a lot smaller than 60 secs.
How to effectively eliminate these messages apart from disabling QuickTime Streaming all together?

I would. (Ignore it.) OS X logging has long had this misfeature; various versions of applications have been far too chatty, others have log ominous messages that are harmless, and there's the occasional innocuous-nasty message logged.
If this particular message bugs you — I have several similar "favorites" in my own logs — add it onto a grep --invert-match pattern or such, and filter it out of the logs before you review them. When you're running OS X or another Unix box in production, message filters based on grep or similar are used to reduce the chatter, and also to flag the nasty messages.

How to remove QuickTime Streaming Server

Hi, I recently installed the QuickTime Broadcaster and the QT Streaming server. Unfortunately I had some problems and I don't want use them anymore. I've already removed the QT Broadcaster but I don't know how to uninstall the Streaming Server. Every time I boot my Mac, the Streaming server is running, and this affects my mac's performances. I'm also unable to start web sharing inside sys pref. Any suggestion? Thank you for your support, bye

I removed the "QT Streaming" folder and now everything is working fine

Is there an updated way of setting QuickTime streaming speed for iChat?

I've been using iChat screen share to help a friend. The first time we tried it, it worked well; the second time, however (same computers), the image of the screen I recieved was suddenly very low resolution (too low for me to see what I'm doing). It sometimes clears up after around 30-40 seconds, but once a window is moved, etc, the problem reoccurs, making the process tedious to the point that I don't think I'd go through this. I saw in a previous community tip that changing the streaming speed in Quicktime can resolve this issue; they specified that this must be done through the Quicktime icon in System Preferences, and not through the standard Quicktime app.. that was for OS 10.5.6; on my OS (10.6.8, and the new QT), Quicktime is now missing from the System Preferences panal : /.. I also saw a user comment on another site saying, "Basically, [the new] QTX lacks the option to pick your codec, frame size, data rate, and so on." So was QuickTime's streaming speed function lost, and do I really need Quicktime to accomplish better image quality for iChat? If it can't be fixed, is there a better screen sharing utility I can get that won't have these problems? Thanks for any help : )..

Hi,
Back before iChat 4 the Video part of iChat chats was based on the reading the app ttok from the Internet speed it could see.
This speed was directly effected by the then System Preferences > Quicktime > Streaming tab setting.
Basically the Automatic Setting was read a 0 (zero) kbps.
The Fastest Setting of Intranet/LAN also got messed up (it would not return a figure iChat could use)
For that reason we used to Suggest that people use the 1.5Mbps T1/Intranet/LAN setting
This limited Video streaming by any app to 1500kbps both as Upload and Download (this is fact a rough figure based on using base 10 rather than the true binary based math involved)
At iChat 4 Apple made iChat see the Automatic setting as 384kbps
This should be fast enough for 4 way Video chats as the Host end. (the person that invites the others)
By Snow Leopard (iChat 5) the Quicktime Setting has gone in System Preferences.
The way iChat "reads" the Internet Speed is different and it is not restricted by Quicktime.
The only way to Cap iChat now is the App Menu > Preferences > Video Section > Bandwidth Limit
Apple state the minimum Internet speed that iChat should have for Screen Sharing is 128kbps
Internet Speeds tends to be based on Binary multiple at lower speeds - 56kbps is max Dial-up Modem speed
128kbps is obviously twice that. The next speed split is like to be 265kbps
Check that you and your Buddy have at least 128kbps as Upload as well as download.
http://www.speedtest.net/
Ideally it should be faster as at that speed you can lose between 10 and 20% in the test and the overheads of running the connection to the ISP
Setting the Bandwidth (in iChat) at 500kbps at both ends can eradicate the variances you can get in slower Internet speeds.
In Snow Leopard Quicktime has become Quicktime X and does have issues playing some Quicktime 7 movies.
This also applies to Lion and Mountian Lion
However there are ways to install the Quicktime 7 Player that will cover the codecs that may not be played.
This info does not apply to iChat though.
8:11 PM Sunday; October 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to set QuickTime export setting to 1080p as default? Thank you! ;-)

HI there,
I was wondering how to set the export settings to 1080p when exporting a video (after trimming for instance)...
It is set to "Movie" by default, I'm not to sure what resolution or data rate "Movie" format is (identical to original file)... since according to apple the other export options are:
Thanks.

Cool, so would it be the same if I save the file as "Movie" or "1080p" once I've trimmed the original file?
No, the 1080p option would re-compress the file as a 1080p H.264/AAC file. This means the compression format may be chaged from its original compression format and that the quality MAY be reduced due to the process of recompression. Basically, it all depends on what the original compression format, settings, and quality were like to begin with. If the original data was in a low compression editing format, then recompressing the data to H.264/AAC should produce a much smaller file with little or no loss in visual quality while recompressing a high compression format may produce little or now change in the file size but noticeably reduce the visual quality. Since "quality" is a highly subjective term, you should really be running your own tests to see which output you prefer rather than asking for opinions from others here.
Also, my question was if I could change the default export settings:
Depends on what you mean by "change" the default settings. The Apple H.264 presets are context adaptive in nature. They are, within certain limits, self-adjusting depending on the video content being transcoded and the specific preset selected. For instance, small target dispay dimensions will produce lower average data rates which means the final file will be smaller but you cannot manually change the frame rate, set key frame frequency, set a/v data rate limits, create custom anamorphic encodes, manually set the profile/level combination, set the entropy mode, etc.

Setting up air printer on non-supported printer using vista os

how to set up air printer on non-supported printer using vista os

Best, as with beauty, is in the eye of the user.
Not sure if Epson has an app avaialble, but there are a number of them. Check the capabilities and reviews. Some printing apps have more capabilities that others.

How to set HttpURLConnection timeout while reading a stream?

I want it got time out if the connection if lose while i read a stream from URL
try {
     int timeout = 700;
     HttpURLConnection connection = (HttpURLConnection) downloadURl.openConnection();
     connection.setConnectTimeout(timeout);
     connection.setRequestProperty("Range","bytes=" + downloaded + "-");
     connection.connect();
     if (connection.getResponseCode() / 100 != 2) {
          error();
     int contentLength = connection.getContentLength();
     if (contentLength < 1) {
          error();
     if (status == DOWNLOADING){
          if (size == -1) {
               size = contentLength;
          file = new RandomAccessFile(saveTmpName+".tmp", "rw");
          file.seek(downloaded);
     byte buffer[];
     stream = connection.getInputStream();
connection.setReadTimeout(timeout);
     while (status == DOWNLOADING) {
          if (size - downloaded > MAX_BUFFER_SIZE) {
               buffer = new byte[MAX_BUFFER_SIZE];
          } else {
               buffer = new byte[(int)(size - downloaded)];
          int read = stream.read(buffer); // how to set timeout while it is reading stream
          if (read <= 0)
               break;
          file.write(buffer, 0, read);
          downloaded += read;
     if (status == DOWNLOADING) {
          status = COMPLETE;
} catch (SocketTimeoutException e) {
     error();
} catch (IllegalArgumentException e) {
     error();
} catch (Exception e) {
     error();
} finally {
     if (file != null) {
          try {
               file.close();
          } catch (Exception e) {}
     if (stream != null) {
          try {
               stream.close();
          } catch (Exception e) {}
}I try to set "setReadTimeout()" but is still not through timeout Exception

ejp wrote:
Because, there's no FTP client command that allows to do such thing.Socket.setSoTimeout().I agree with you on this one but the OP is talking about the FTPClient API from Apache.
To the OP,
BTW, I have reread the Javadoc about the [*API*|http://commons.apache.org/net/api/org/apache/commons/net/ftp/FTPClient.html] : indeed, there's no setTimeout method, but there is a setDataTimeout method : +Sets the timeout in milliseconds to use when reading from the data connection+ .

How do I install Quicktime Streaming Server?

How do I install Quicktime Streaming Server?
Thanks
Mac mini G4 Mac OS X (10.4.6)

The Apple-supported QuickTime Streaming Server only comes with Mac OS X Server. What you need it QTSS's open-source twin Darwin Streaming Server. Download that, open the disk image, and just double-click on the package file to install.

How to set the resolution_column in set_update_conflict_handler of stream

hi:
who will tell me the relation between resolution_column and column_list in
dbms_apply_adm.set_update_conflict_handler of stream? how to set the resolution_column?

Note: Prebuilt update conflict handlers do not support LOB,
LONG, LONG RAW, and user-defined type columns. Therefore, you
should not include these types of columns in the column_list
parameter when running the SET_UPDATE_CONFLICT_HANDLER
procedure.
See Also: "Supplemental Logging for Streams Replication"

How do I improve sound quality when the sync property is set to "stream"

I recently had a problem with timing text with sound (narrator). For example, when a user tapped a button a narrator would read text on the page and the words would highlight as the narrator read the words. The problem I ran into was that it performed well on the desk top but the timing was off on some mobile devices. So I set the sync to "stream" and it worked fine. But I ran into another problem; the sound quality went down, sounding muffled.
How can I make the sound quality better when the sync property is set to "Stream"?

you can control streaming sound quality in your publish settings which can override the sound quality settings that you can set by clicking the library sound's properties (right click/properties).

How to set captured audio stream to be inputstream of socket?

Hello everyone,
I am doing a project on Voice Chat Room. I am success to captured the live audio from a microphone and I would like to use socket to tranmit those live audio data. I have the basic knowledge of socket, but I don't know how to set those audio stream to be the inputstream of socket.
Can you tell me whether it is possible to do this? And can you give me some hints how to do this?
Cheers!!
Andrew

Hi there is code available at http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html for capturing and transmiting through RTP the is also a custom protocol impplementation that uses UDP sokets it could be of help.
Does anyone know how to enable computers behind routers video conference ??
please mail me at [email protected]
thanks
Xerxes

QuickTime Streaming Server

I've been looking to stream my webcam online and I understand how to do so.. The only thing that is puzzling me is that I can't find the QuickTime Streaming Server program or what not. All I need to do is set up my server and I'll understand the rest.. How do I get to the server setup?

Well I'm planning on putting the webcam on my webpage.. It's just that I'm using www.freewebs.com which is a free webspace and doesn't provide me w/ a server. I was planning on using QuickTime Broadcaster but it seems to require that I have a server enitialised.

Problem with QuickTime streaming

Hi there
I got an IPad 2 3G , but I have a huge problem. I have a website, which contains some quicktime stream video. but IPad cannot play them at all. Movies have a black screen, in the middle there is QuickTime logo.
Can you help me, how to fix this problem?
Thank you!

Did you repair permissions & restart your computer after installation? If so, then go into your browser's Preferences & map either VLC or Perian as the browser's web plug-in.
I would also go into QT Preferences & check its streaming preferences.
System Preferences>Quicktime>Advanced
Click on the MIME Settings button.
In the next window that opens up make sure that Streaming-Streaming movies is enabled (checked).
While you’re at it make sure all the boxes are enabled by clicking on the corresponding triangles so that they are pointed down.
This will show the “hidden” boxes especially the Video box. This box will enable you to play .avi files.
Click the OK button.
Now click Streaming
Your settings you should be (as starters):
Streaming Speed: Automatic
Make sure Enable Instant-On is enabled (checked).
Now click on Browser
Make sure:
Play movies automatically
Save movies in disk cache
Are both enabled.
Movie download Cache Size: Slider set all the way to the left.
==============
To make VLC your default .avi player:
Highlight an .avi file>File>Get Info>
In the Get Info window, scroll down to "Open with:"
Select VLC.
Click the "Change All..." button if you want to "Use this application to open all documents like this.”

Exporting in Quicktime Stream

I have a 3 minute video and I need to export it into a quicktime streaming file for the internet. I need it to be 240x180. How do I make the settings like that in final cut pro hd?

file>export>quicktime conversion>set up your parameters.
Remember that streaming is a function of the bandwidth of the server hosting your clip. You can set the file up for streaming, but if there is limited bandwidth, it'll choke.

Critical issue for language lab! Quicktime Streaming broken for Guest

An issue reported in January is still apparently unfixed because we're experiencing the same problem as Jeremy. Here is his message, which had no replies (his message is between the dashes):
Quicktime streaming and the Leopard Guest Account
Posted: Jan 28, 2008 4:21 PM
http://discussions.apple.com/thread.jspa?threadID=1367366
If I set the account to be managed it doesn't work. I cannot access QuickTime streams using Leopard's built in Guest account. If I set the the streaming transport to http I get "403 forbidden", if I set it to udp I get "-3285 Disconnected". Anyone know how to fix this? I do not have the "Website Restrictions" turned on for this account. That is to say, I have the the controls enabled to block specific applications, but I set it to "Allow unrestricted access to websites"
(on this point, you can't NOT have the parentalcontrols proxy running for some, infuriating, reason. If you want to manage which Apps a given account access to, the parentalcontrols proxy is enabled, and cannot be bypassed, even if select not to filter web content).
We set up a fresh Guest Account on our new iMacs that just came in. They're running 10.5.6 and Quicktime 7.5.5 (which I re-installed in an attempt to fix the issue). Like Jeremy, I get the Disconnected error when Quicktime is set to UDP and Forbidden when it's set to HTTP.
I have tried to use the latest Server Admin Tools to disable/enable Parental Controls and Application launching management, to no avail. I've repaired permissions several times. I've copied the Internet plug-ins to the Guest account directory (System - Library - User Template - English.lproj - Library - Internet Plug-Ins). I've tried the same thing with the Quicktime Preferences file from the admin account in which streaming is working. I have also tried giving every Internet plug-in max read-write permissions for every user and the folder, too. I disabled Parental Controls in the Guest Account. Nothing works.
We're going to have to completely re-make our lab image and re-image the lab, which is a huge undertaking because of this long-standing bug.

I believe I have partially fixed the issue.
Disabling Parental Controls in the Guest account when logged into the Guest account does nothing, despite the prompt for an admin username and password. One must log into an admin account directly to turn them off via the Accounts control panel.
Turning Parental Controls off allows us to once again view streaming movies via the Quicktime plug-in in a webpage. Hooray!
However, Parental Controls remains problem, so it behooves Apple to figure out why it is interfering with basic functionality like this. Another issue turning off Parental Controls solved is an issue with Adobe's Flash plug-in in the Panaorama web site, a language learning textbook. With Parental Controls on, the voice recording functionality via Flash is broken, too.

How to set QuickTime Streaming server6.0.3 support IPV6?

Similar Messages

Maybe you are looking for