How to set RAW defaults for Contrast and Brightness?

When I open a RAW fole in PS Elements 8 the Brightness set to 50 and the contrast set to 25.
How to set these two values to 0 (zero) as a defaults when a RAW file opened for the first time (defaults).
Thank you for the help.
Leo

I think you can set presets in camera RAW (I'm at work now so I can't tell you the exact method), but setting contrast and brightness to zero gives you an ugly image, and you will most likely move the contrast up and the brightness up, so I'm not sure you are really gaining anything by having a default of 0 contrast and 0 brightness.
The defaults chosen by Adobe are reasonable.

Similar Messages

How to set raw format for canon powershot a1100 is ? ,,according to the specs online it can.

how to set raw format for canon powershot a1100 is ? ,,according to the specs online it can.

It requires the Canon Hacker's Developement Kit (CHDK). It runs off of your SD card and does not harm your camera. Download a program called Stick-
http://zenoshrdlu.com/stick/stick.html
Follow the directions and you will be able to shoot in RAW along with some other deatures not available on your camera previously.

How to set userlevel permission for GFS and NFS

hi
how to set userlevel permission for GFS and NFS?
regards

hi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards

How to set timer intervals for object + and a motion for entering stage

Hi, I am making a simple game but I have a couple problems/queries.
1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the Fruit Ninja game, but not limited to entering from one side, does anyone know how to set this?
2) As I mentioned above my objects appear randomly, I have set a timer when I change the timer from 800 to another number, it just makes all the objects on the screen last for 800 milliseconds all at the same time then disappear and appear somewhere else on the screen for another 800 milliseconds and it repeats, what I am trying to do is make them come at different intervals, for example:
Object 1 - constantly appears, so when the 800 millisecond is over, it comes back on a different part of the stage
Object 2 - I want it to appear every 5 seconds, so when the 800 millisecond is over it will come back on the stage in 5 seconds, but not instantly like Object 1
But I have no idea how to do this :/ anyone have the code needed for me to do this?
Sorry for the long questions, I only asked because I really am stuck, I have been trying to do this for over 2 weeks now.
Thanks very much.
My Code
[Code]
//importing tween classes
import fl.transitions.easing.*;
import fl.transitions.Tween;
import flash.utils.Timer;
//hiding the cursor
Mouse.hide();
var count:Number = 60;
var myTimer:Timer = new Timer(1000,count);
myTimer.addEventListener(TimerEvent.TIMER, countdown);
myTimer.start();
function countdown(event:TimerEvent):void {
myText_txt.text = String((count)-myTimer.currentCount);
if(myText_txt.text == "0"){
gotoAndStop(5)
//creating a new Star instance;
var star:Star = new Star();
var box:Box = new Box();
var bomb:Bomb = new Bomb();
//creating the timer
var timer:Timer = new Timer(800);
var timerbox:Timer = new Timer(850);
var timerbomb:Timer = new Timer(1000);
//we create variables for random X and Y positions
var randomX:Number;
var randomY:Number;
//variable for the alpha tween effect
var tween:Tween;
//we check if a star instance is already added to the stage
var starAdded:Boolean = false;
var boxAdded:Boolean = false;
var bombAdded:Boolean = false;
//we count the points
var points:int = 0;
//adding event handler to the timer;
timer.addEventListener(TimerEvent.TIMER, timerHandler);
//starting the timer;
timer.start();
function timerHandler(e:TimerEvent):void
          //first we need to remove the star from the stage if already added
          if (starAdded)
                    removeChild(star);
          if (boxAdded)
                    removeChild(box);
          if (bombAdded)
                    removeChild(bomb);
          //positioning the star on a random position
          randomX = Math.random() * 800;
          randomY = Math.random() * 1280;
          star.x = randomX;
          star.y = randomY;
          star.rotation = Math.random() * 360;
          box.x = Math.random() * stage.stageWidth;
          box.y = Math.random() * stage.stageHeight;
          box.rotation = Math.random() * 360;
          bomb.x = Math.random() * stage.stageWidth;
          bomb.y = Math.random() * stage.stageHeight;
          bomb.rotation = Math.random() * 360;
          //adding the star to the stage
          addChild(star);
          addChild(box);
          addChild(bomb);
          //changing our boolean value to true
          starAdded = true;
          boxAdded = true;
          bombAdded = true;
          //adding a mouse click handler to the star
          star.addEventListener(MouseEvent.CLICK, clickHandler);
          box.addEventListener(MouseEvent.CLICK, clickHandlerr);
          bomb.addEventListener(MouseEvent.CLICK, clickHandlerrr);
function clickHandlerr(e:Event):void
          //when we click/shoot a star we increment the points
          points += 5;
          //showing the result in the text field
          points_txt.text = points.toString();
                    if (boxAdded)
                    removeChild(box);
          boxAdded = false;
function clickHandler(e:Event):void
          //when we click/shoot a star we increment the points
          points++;
          //showing the result in the text field
          points_txt.text = points.toString();
          if (starAdded)
                    removeChild(star);
          starAdded = false;
function clickHandlerrr(e:Event):void
          gotoAndPlay(5);
[/Code]

The only thing that affects TopLink is the increment by, as increasing this is what allows TopLink to reduce the number of times it needs to go to the database to get additional numbers. Ie, an increment value of 1 means TopLink needs to go the database after each insert; an increment value of 50 allows it to insert 50 times before having to get a value from the sequence. The cache on the sequence object in the database affect the database access times. While it may improve the access times when the sequence number is obtained from the database, but I believe the network access to obtain the sequence is the greater concern and slow down for most applications. It all depends on the application usage and design though - an increment (and application cache) of 50 numbers seems to be the best default.
I cannot say what effect the cache vs nocache settings will have on your application, as it will depend on the database load. Only performance testing and tuning will truly be able to tell you whats best for your application.
Best Regards,
Chris

How to set up icloud for family and one itunes account

I just got a new disk drive in my MACbook (now upgraded to Mountain Lion) so starting from scratch with itunes. With 4 IOS devices in the family and only one itunes account, I would like to figure out how to backup every device to itunes. I was able to save old itunes data on a jump drive, but did not have a Time Machine backup so I am literally starting from scratch and want to do it right.
I need to get data from IOS devices to itunes(via ICLOUD?) before I hook up device to "new" disk drive on MAC.
I am scared I will loose the data on the devices when I hook them up to the new Mac. Any help would be appreciated...
Can we each have separate Icloud IDs and still have one Apple ID we use for Itunes account?

"Can we each have separate Icloud IDs and still have one Apple ID we use for Itunes account?"
Yes, that's the suggested way of doing it.
As for starting from scratch - you need to decide which Apple ID to use for the mac. If each member of the family uses the mac, then set up a seperate account for each and use the Apple ID (the one used for iCloud) to sign into icloud. Use the common ID for itunes purchases. I'd suggest first syncing devices to icloud to get whatever data is important (contacts, events, ...) saved. When on the mac you connect to an iCloud account, the data (just synced from a device) will come down to the mac (for that account).
Tell us what "data" you want to get to the new Mac?

How to set mac shortcuts (for mac and windows OS)

i am having a bit of an issue.
i run windows 7 and mac os on the same computer on different hard drives in this computer. i also have a "mac" keyboard. i am not sure how this may be different from a "windows keyboard" but the point is i need to use this keyboard because it matches the one on my laptop which is a mac.
when i switch to windows on this machine i always end up deleting information because the CMD + X and CMD + V cut and paste shortcuts on Mac OS are not the same in windows. windows requires (currently) CTRL + X and CTRL + V. so when i got to cut and paste in windows CTRL + X (this is my habitual way of working) and then i run a CTRL + V i end up writing /over/ the text i selected with a "x" and i end up pasting /over/ the text i selected to paste over with a "v". this is because instead of running a cut and paste, this set of shortcuts in windows simply enters "x" and "y" respectively since the shortcut is not active.
does anyone know where i set these in windows OS and in mac OS?
also, does anyone know if it is possible to set how many UNDOS i can do in either of these OS's or to know how many i can in fact undo?
THANKS
long story background:
1. while i may move to a windows keyboard on the computer i am using (because the mac keyboards these days end up losing keys and they end up very wobbly) i cannot do this for the laptop machine so this may not make a lot of sense if i end up also running windows on the laptop which is my intention at some point.
2. CTRL + X is a very long stretch on the mac keyboard so rather than switching mac shortcuts to accommodate windows shortcuts i am thinking to switch windows shortcuts to mac ATM.
3. this is no small issue! i just went to copy and paste this text so i could save it for myself in order to explain to someone else and i ended up overwriting with a "c". if i had not thought fast and remembered to UNDO by hitting CTRL - X and not CMD - X i might have lost all my work.

long delay - no email of your post here
I also realise that you can use system preferences - Keyboard - modifier keys to make cmd = ctrl or vice versa
I'd surely ask/read elsewhere about altering windows, given the reach issue - but no qualms beyond confusion if switching/using other machines. You might soon find you switch layouts mentally, quite easily.
more to read:
Remap Copy and Paste shortcuts on a Mac - Super User
Remapping Keys and Buttons
Microsoft Windows Keyboard remapping
How to: Remap Apple Keyboard Command Keys to Control Keys

How do I stop camera raw automatically applying contrast and brightness when I load an image?

Everytime I load an image in photoshop or camera raw from bridge it automatically applies 50% brightness and 25% contrast and 5% black fill. It's ruining the pictures. I have already tried resetting photoshop and bridge to their default settings using cntrl, shift, delete. Any ideas?
thanks

I think you have posted your question in the wrong forum. This is the Acorbat Windows forum and not one of the image processing forums. Acrobat does not use the ACR plugin.

How to set up VLAN for DATA and VOIP on SRW248G4P switch?

Hi guys,
I am totally new and was given this task to complete. I really really need help.
We are using one network 192.168.1.0
Shared with data and voip.
CISCO C870, 5 switches LINKSYS SRW248G4P .
The email wrote:-
On the Linksys switch;
- create two different VLANs one for voice and one for data.
- put a firewall between the two VLANs (between voice and data) and only enable certain ports to flow to voice network (inbound tcp 8443 and ssh )
What should i do guys? I really need a dumb guide now.
I know its simple for you guys but i am not a smart IT fella. Whats the step by step?

If the switch is new or you have support on this, then you might try calling the support center. Here is a link:
https://www.myciscocommunity.com/community/smallbizsupport
On the right hand side you can find links to the support center.
Here is a link to the guide:
http://www.cisco.com/en/US/products/ps9967/prod_maintenance_guides_list.html
@ the bottom of this link you can find your switch model, you want the larger of the two. In this guide it shows you how to create a second vlan.
Will your router be the firewall between the two?
Kindest regards,
Andrew Lissitz

How to set filter criteria for month and year using in timestamp input field?

Hi,
I am using jdev 11.1.2.3,
I have one problem with Report generation,,,,,,I have one report table which is in the form of VO(query based) and i want to search this table as month and year basis
but in this table(query) that field having timestamp based value.. how to search with month name and year only.. Here i am using totally query base VO's for generating
reports........ Can any one guide me.
Thank You.

You can use a inputdate, which allows you to selecte a moth, year and a day. Once the selection is made you convert it to only allow moth and date like
        <af:inputDate label="Label 1" id="id1" autoSubmit="true" value="#{bindings.myMonthYear1.inputValue}">
          <f:convertDateTime pattern="MM/yyyy"/>
        </af:inputDate>
        <af:outputText value="Selected #{bindings.myMonthYear1.inputValue}" id="ot1" partialTriggers="id1"/>
then you have a string holding month and year only. This value you split into two variables you or pass it as a whole parameter to the query and split it there.
Another way is to add two static lovs one for month and one for year and use them to get to the filter values.
Timo

How to set the classpath for servlet and jsp???

i add C:\tomcat-5.0\common\lib\servlet-api+jsp-api to the class path from DOS prompt, as show below:
set CLASSPATH=%classpath%;C:\tomcat-5.0\common\lib\servlet-api.jar;C:\tomcat-5.0\common\lib\jsp-api.jar
then, i compile the servlet:
javac FirstServlet.java
no error
and i copy the .class file into C:\tomcat-5.0\webapps\servlets-examples\WEB-INF\classes
i set the JAVA_HOME enviroment variable as below:
set JAVA_HOME=C:\Program Files\Java\jdk1.5.0_08
i start the tomcat version 5.0 and run web browser and type http://localhost:8080/servlets-examples/servlet/FirstServlet
i get the error message:
HTTP Status 404 - /servlets-examples/servlet/FirstServlet
type Status report
message /servlets-examples/servlet/FirstServlet
description The requested resource (/servlets-examples/servlet/FirstServlet) is not available.
Apache Tomcat/5.0.30
Can anybody tell me how to solve the problem. Thanks a lot.

You will have to create the servlet mapping in the Web.xml file
<servlet>
             <servlet-name>FirstServlet</servlet-name>
             <servlet-class>FirstServlet</servlet-class>
    </servlet>
<servlet-mapping>
        <servlet-name>FirstServlet</servlet-name>
        <url-pattern>/servlet/FirstServlet</url-pattern>
    </servlet-mapping>

How I set character encoding for everypage and alway?

I use Thai window 874 open the page when I select some website it contain Thai then click open new tab it change to western windows 1252. It can not display Thai. I must set character encoding to Thai windows 874 everytime.

Try this:
Prefrences -> Content -> Fonts & Color -> Advanced
At the bottom, choose your Encoding.

How to set my default application...not working

My company has nearly all adobe applications installed from PageMaker 6.5 through InDesign 5.5. We use them all frequently. I'm trying to set my defaults on the Mac Pros and it is not working.
Specs if Needed:
OSX 10.6.8
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
Memory:          6 GB
Boot ROM Version:          MP51.007F.B01
+BootCamp dual boot Windows 7
We proof out all files in the version that it comes to us. Our customers are on different versions than the most current, and it's driving us crazy that we can't set the defaults for
each Adobe application. For Instance,
We want for Defaults:
Photoshop = CS4
InDesign = CS4
Illustrator = CS5
etc.
The Finder will not allow us to make the change to open all of a certain file type in the version we want by default. We also use a third party application that allows us to "double
click" InDesign files and open them in the correct version. This saves valuable navigation time and because of the OS's problem with using the correct icons, it also saves us time
dealing with the "Untitled" document when we accidentally convert by opening in the wrong application by mistake. We have gone through Onyx utilities and massive permissions
troubleshooting to no avail. Does anyone know how to set the default for ALL files of a type for Adobe Apps? This has been thoroughly tested and is not working on 10 plus
machines, and only effects Adobe apps.
Any Ideas?

I think you miss understand the question. There is a problem with OSX 10.6 and Adobe Apps. 10.5 ok, not sure about 10.7 because of all of the other Adobe problems we downgraded the test machine that we used for the upgrade. There is no way that I have found to make the files “Double-Clickable” through assigning a default application of files with Adobe extensions. We already have an app. that we use and it worked fine until 10.6. I can’t just approve a division-wide purchase of software for a bug that may be solvable by other means (by the way supposed cost of the licensing Soxy is deceiving at $20. Not for us. For companies it’s $20 per platform & also for each time Adobe updates. When we swap out hardware, we have to pay $40 again . Their pricing is absurd). $40 x a couple hundred machines every 18 months or so, uugh! The ten or so I’m working with are just the ones in my immediate department.
I know you have good intentions with your reply and I appreciate it, however I’m looking to solve the problem, not put a band-aid on it. If the problem is by design so Rorohiko can hold companies hostage, then I guess we’ll just have to deal with the few extra clicks it takes to figure out which version we’re in need of, and dragging to the launch bar.
Thanks very much for your reply,
Seth

How do I stop camera raw adjusting contrast and brightness automatically when I open any image

Every time I open in image in camera raw or Photoshop it is applying an automatic contrast and brightness setting. I have tried resetting to defaults with cntrl shft del but it doesn't make a difference. It also when I just flick through thumbnails on bridge. The pics look almost like they have a cartoon like filter on them!!any ideas on how I get it all back to normal it's been great in the past . I use cs3

Short answer, learn how to use the tool...
As for the "auto" adjustments, are you sure that's what's happening or are the images changing based on the differences between what the camera preview and the Camera Raw preview look like? If you have indeed somehow turned on the "Auto" adjustment and saved that out as a Camera Raw default, you can go into the Camera Raw flyout menu and choose the option to Reset Camera Raw Defaults. If however you are talking about the inherent differences between the way your camera renders raw and the way Camera Raw renders it, that's an entirely different discussion...
As for your other question, try rephrasing it as it doesn't mean a thing to me so I have no idea how to answer...

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set a default value of " " for a VARCHAR2 in ER diagram?

Hi,
I am trying to set the default value of a VARCHAR2 attribute to " " (space) in an ER diagram. But it just thinks I don't want anything for the default value. If I specify CHR(32) will it work? or is there another way? Will I have to wait until I get into the server model to do this, if so how do I do it there?
thx
adam

Are you sure you want the default to be a space, not a NULL? VARCHAR2 fields want to trim spaces from the right, which makes them NULL if they started as all spaces. You can force them to accept spaces, but it is an unnatural condition. Even the VARCHAR2 columns that I use as surrogates for booleans I set as 'Y' for true and 'N' for false, or 'T' for true and 'F' for false. Occasionally, it will be 'X' for selected and NULL for not selected, but the NULLs tend to cause trouble so I avoid them.
Okay, let's assume that you have a good reason to default to a space. Use ' ', including the single quotes. When you transform to a Table Definition, change the Default Value Type for the column to a Database Function Call. You can't do that in the logical (Entity/Attribute) design, only in the physical (Table/Column). That will make sure that the Server generator will leave it the way you wrote it.

How to set RAW defaults for Contrast and Brightness?

Similar Messages

Maybe you are looking for