How to set screen to face out

I'm working on a project that ends with a white slide, which is being used as the fade out screen. But the client would like the second to the last slide (the last slide in the presentation) to fade out completely before transitioning to actual final slide. The Transition feature both fades in and fades out, but I'm just looking to fade out only.
Thanks for your help.
jprimo456

Just add a solid white highlight box that covers the entire slide about 2 seconds before the end of the second last slide and set its duration to be till the end of the slide.  Then set the transition on this box to Fad In Only. 
If your final slide is the same colour (all white), you should get the effect you wanted.

Similar Messages

  • How can set screen resolution on firefox , i know zoom in and out but i want set my broswer to my favorie levelof zoom

    hi
    how can set my firefox screen resolution ( i know zom in and zom out but when i restart my firefox , it chanaged to perviose level of zoom )

    In case you are using "Clear history when Firefox closes":
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords and website specific setting like the page zoom.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception.

  • How to set screen resolution on Apple TV Gen2

    This is my first bad out of the box experience with an Apple product. I got my brand new Apple TV Gen 2 and hooked it up to our Sony Receiver/TV.
    Plugged everything in. Turned it on and I got the screen but am not able to change resolution. With the current resolution I can not see all the menus and the display does not fit on the 40" display.
    Tried unplugging.
    Tried doing a reset.
    Tried holding the Menu & Down arrow
    Tried looking through the menus, such as Settings, Video & Audio but can't find anything on setting screen resolution
    Tried searching this forum for instructions for changing resolution
    Much appreciation in advance for any tips or magic tricks on setting screen resolution.

    i also have this problem. i had a long discussion with apple support and the result was that apple tv 2 is not build for connecting it to a receiver but only to a up-to-date flat TV. i don´t know how i managed it to use the 720p resolution but as i had it i set the auto power to off and let it switched on all the time.
    after the update to 4.2.1 it had no chance to get it to 720p. it is locked to 1024x768 which is not the resolution i want to watch HD movies.
    but my setup is not a normal one. i have a onkyo AV receiver which is sending the HDMI signal over a HDMI splitter to an LCD screen and a HD beamer. the LCD screen is an old one which has no HDMI input, i use a HDMI to analog-component converter for this. the HDMI output of the onkyo is connected to a wireless HDMI system from marmitek.
    so its not so the ideal setting for apple tv. i hope that everything works fine if i have a new flat TV with a normal HDMI input.

  • How to set Screen type "Selection Screen" in Dialog program

    Hi Experts,
    I have copied a screen 400 from a program into my program. In that screen in source program, the screen type was defined as 'Selection Screen'. After i copied that screen into my program, the screen type Selection Screen option is disabled. How to set the screen type of a screen to Selection Screen.
    I am currently getting the following error
    "Error when generating the selection screen "0400" of   "Ztest_screen                 ".
    I tried running the generation program RSDBGENA. There the diagnosis was given as follows:
    When generating the report Ztest_screen and its selection screen, an existing screen 1000 (not a selection screen) was overwritten.
    The selection screen was defined as follows:
    SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_matnr FOR mara-matnr.
    PARAMETERS:     p_werks TYPE werks_d OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK blck1.
    SELECTION-SCREEN END OF SCREEN 400 .
    I am calling the screen 400 with selection screen declarations in PBO of screen 0100.
    CALL SUBSCREEN sub_scr INCLUDING 'Ztest_Screen'  '400'.
    Where am i going wrong? Your inputs are needed.
    Thanks

    Thanks Przemysław and Nabheet for your suggestions.
    I had copied the generated screen 400 also from the source program into my program. This was the error. I deleted that and the report got activated now.
    Both the source and destination programs are not module pool. They are executable programs.
    Thanks

  • How to set screen resolution in BDC

    hi pls give info regarding how to set resolution for screen
    thank you
    Ravi

    hi,
    For screen resolution use ctu_params, with default size
    Data : f_option type ctu_params,
    f_option-updmode = 'S'.
    f_option-defsize = 'X'.
    f_option-dismode = 'N'.
    call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
    CALL TRANSACTION tcode... OPTIONS FROM opt
    ... OPTIONS FROM opt
    Effect
    Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
    DISMODE
    Display mode (like the MODE addition)
    UPDMODE
    Update mode (like the UPDATE addition)
    CATTMODE
    CATT mode (controls a CATT)
    CATT mode can have the following values:
    ' ' No CATT active
    'N' CATT without single-screen control
    'A' CATT with single-screen control
    DEFSIZE
    Use default window size
    RACOMMIT
    Do not end transaction at COMMIT WORK
    NOBINPT
    No batch input mode (that is, SY-BINPT = SPACE)
    NOBIEND
    No batch input mode after the end of BDC data.
    The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
    'X' Yes
    ' ' No
    If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
    DISMODE
    From addition MODE
    UPDMODE
    From addition UPDATE
    CATTMODE
    No CATT active
    DEFSIZE
    Do not use default window size
    RACOMMIT
    Successful end on COMMIT WORK
    NOBINPT
    Batch input mode active ( SY-BINPT = X
    NOBIEND
    Batch input mode remains active after the BDC data

  • I lost my ipod touch and never set up gps how to set it up with out having my ipod

    i lost my ipod touch and never set up the gps. How do i set it up with out having my ipod touch

    You can't. You are SOL.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • How to set Screen Sharing to greyscale on Leopard 10.5

    The new screen sharing feature (just a built in VNC client) is decent, although I would've liked it better if it gave an option to view the connected computer in greyscale (like Apple Remote Desktop can), so as to make the screen redrawing much quicker. This is how you do that:
    To change this setting manually, open up the Terminal and type in the following command:
    defaults write com.apple.ScreenSharing controlObserveQuality 2
    This changes the controlObserveQuality setting within this plist file: “~/Library/Preferences/com.apple.ScreenSharing.plist” file to 2, which is grey scale. To change it to a different resolution, substitute the number 2 with one of the following numbers:
    1 = black and white
    2 = grey scale
    3 = 8 bit color
    4 = 16 bit color
    5 = full color
    However, when you've connected and you're all happy that you have greyscale, if you then choose Adaptive Quality from the View menu in Screen Sharing, this will set the default back to 3 (8 bit color), and you'll have to run the Terminal command or edit the .plist file again - so, just leave it when you initially set it and all will be well!
    ----

    I tried the malisphoto.com solution it but it didn't work for me.
    I even tried the one at entropy.com but that also didn't work.
    I was very careful and successful in the command line (bash) and afterwards, phpInfo() showed that the GD library was installed, however, my localhost GD (gif draw) scripts still kept showing the same old error messages on my localhost (and not online): "Fatal error: Call to undefined function imagecreatefromgif()"
    Perhaps I'm just wrong to think PHP GD will work on my localhost pages after performing these installations - perhaps I'm misunderstanding something? Am I'm trying to change a light-bulb with a jack-hammer?
    I should also point out that both solutions made my localhost run extremely slow. After restoring my system, it's all working fine (but without php GD).
    My system is a Power Mac 10.5.8 Leopard
    This is really lame. Is Apple trying to shut out PHP now? Is PHP the new "Flash"?

  • How to set screen size of Labview toplevel application

    HI,
    I developed an application considering my monitors screen size. When my application was run on another machine whose monitor was set to a different resolution, parts of the application when off the screen. How can I make sure that when my application runs on any machine it will fit onto that screen.
    Thanks
    --A

    Hi,
    select File/VI Properties. In VI properties window select Category->Window Size. Select 3-rd option "Scale All Objects on panel as the Window Resizes".

  • How to set screen properties for Customer fields in PO(Enhanced using BADI)

    Hi All,
    I have added one custom tab with seven fields in the PO item level using the BADI 'ME_GUI_PO_CUST  and ME_PROCESS_PO_CUST'.
    Now i want to change the screen property dynamically. According to some calculation i need to change the customer fields in display mode and change mode. when ever it is in change mode i need to set the fields as mandatory.
    How can i implement this logic using this BADI. Please help in solving this issue.
    Best regards,
    Kannan. B

    Hi,
    Try adding the code in the PBO part of your custom program used for the custom screen which you have created and added inside the BADI.
    Regards,
    Harish

  • How to set screen field in ME_PROCESS_PO_CUST?

    Dear all,
    I need to set this field 'MEPO1317-MWSKZ' to display only by some criteria. I want to know HOW to do it in ME_PROCESS_PO_CUST
    Thanks for your kindly helpful.

    Hi Esaki,
    1) Define new field selection in configuration "Define screen layout at Document level"
    2) write code in fieldselection_item_refkeys as follow
    get item data
    if your condition
      ch_key0 = new field selection
    endif
    Hope it can help u.
    Grace

  • How to set screen size

    Hi
    How change screen size in simplest way? Now I have 640x480, but i wont to set up to 1280x1024.
    in Preferences->DesktopPreferences->Display->Screen Resolution I I see only one option 640x480
    I try use xorgconfig but then my Xserver dosn't start.
    Monitor : DELL M920
    Graphisc: Nvidia GeForce FX5200 Ultimate
    Mouse: Logiteh MX310
    Keyboard: Labtec Flat
    in xorgconfig:
    Mouse :
    option 1 - Auto,
    Emulate3Buttons - y,
    MouseDevice - Enter
    Keyboard :
    7 -Generic 104 key PC
    Enter a number to choose the country - 60 and next Enter
    Do you want to select additional XKB options - no
    Monitor :
    11 Enter your own horizontal sync range - 96
    5 Enter your own vertical sync range - 160
    Enter an identifier for your monitor definition: DELL
    Graphics :
    349 - NVIDIA GeForce
    10 - 131072K
    Enter an identifier for your video card definition: FX5200
    4 16 bits (65536 colors)
    Help!!

    Did you get an answer to this question?

  • MM06E005 - how to set screen attributes for custom fields?

    Hi all,
    I have implemented enhancement MM06E005. I have added my custom fields to CI_EKPODB.  I have created and activated all the dynpros.  I modified subscreen 0111 (items) to contain my new custom fields.  I have activated the function exits (016,017,018) for the item screens.  I am able to save data using the new custom fields on subscreen 0111.
    What I am having trouble with is modifying the screen attributes for the new custom fields that I placed on subscreen 0111. I know it should be in exit 016(PBO) and I need to check the action type.  I tried a "loop at screen" but my fields were not there. 
    How do I modify the screen attributes?  Also, can I change the "Tab" text from "Customer Data" to be something else?
    Any help would be appreciated.
    Thanks, Mark

    Hi,
      In the PBO of the screen 0111, create a module. And in that module you can do LOOP AT SCREEN..where the screen elements will be available..
    Thanks
    Naren

  • How to set up Mail - hotmail - out going mail server?

    Hi,
    I need a help in that particular case, I cant set up Mail on Mac OS X 10.5.8, Outgoing Mail Server - what should I wrote down there?
    I cant sort that out.
    Please help
    Thanks Kate

    See if this helps...
    http://matthill.eu/tutorials/outlook-hotmail-imap-setup-osx-mail/

  • Nouveau driver on Xorg how to set screen borders/margins ?

    Hi I'm using the nouveau driver on a TV screen at the resolution of 640x240, the problem is that the TV screen is an old screen of an arcade cabinet and some of the Xorg screen is out of the actual TV frame.
    There's a way to center the image from Xorg ?
    I'm looking for a solution but i didn't find yet.
    Thank you.

    I've messed out with the Modeline with no results and now i guess that my problem is a bit different... Advmame and sdlmame appear at center perfectly, wahcade too.
    I got an overscan problem only with xterm and xmame that appear cut out on the left. So I'm guessing is a problem of "Xorg related applications" ?
    There's a way to fix that ? I use the geometry option for xterm so i can put the console to the center of the screen... but this is more like a workaround than a stable solution, i would like to find a base solution for every Xorg related application and not using geometry for every Xorg app.
    Anyway if I'll find out what can i do and I'll post my workaround when i come up with something stable.
    [EDIT]
    I've find out what was the problem with xmame.
    I've changed the value of two configuration variables from 0 to 1:
    video-mode              1  # stands for: 1 Fullscreen DGA (hotkey left-alt + home)
    fullscreen              1 # xmame to fullscreen
    Last edited by marcs (2011-06-30 22:55:25)

  • Does any one know how to change how to set screen sharing in mavericks 10.9 to observe mode as default.

    In ML 10.8 there was a choice and default could be set. Thanks.

    Unless you backed up your data somewhere, it's gone.
    There are programs like Disk Drill Pro that may find a few recoverable files, but after doing a clean install it's doubtful that much of the data could be recovered in any useful format. And the more you use your computer, the more data is overwritten.

Maybe you are looking for